You are here

Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(67 pages)
P-NECK-S-02Neck - for Stratocaster Guitar, Vintage Maple

Vintage replacement neck for Fender® Stratocaster® guitars. This licensed Fender® neck combines the vintage appearance with some great modern features. It has the small peghead drilled to accept vintage Kluson® tuning keys. Honey gloss poly finish, 21 medium-jumbo frets, 10 in. fingerboard radius, single action truss rod installed from the back, and covered with a skunk stripe, adjusting at the heel just like the originals.


$149.95
Click to read more
P-NECK-T-31Neck - for Telecaster Guitar, Vintage Maple

Replacement Vintage Telecaster® neck with mostly vintage and a few subtle modern features like 21 medium jumbo frets, 10 in. radius, 1 5/8 in. nut width, a comfortable C shaped profile and a honey tinted gloss finish. Maple finger board with a heel adjust truss rod location and 8.8mm peg holes drilled for a vintage Kluson® tuning machine as nature intended. Nut not included. Fender Licensed replacement neck.


$149.95
On Backorder
Click to read more
P-GB500-XVibrato - Bigsby, B500, for flat-top electric guitars
Colors Available:

Lightning Series II. The Bigsby vibrato tailpiece is a type of vibrato device for electric guitar designed by Paul A. Bigsby. The device allows musicians to bend the pitch of notes or entire chords with their pick hand for various effects.



  • Model Name: B-500
  • Series: Lightning Series II
  • Manufacturing Method: Die Cast
  • Manufacturing Material: Aluminum
  • Approximate weight: 279 grams/9.8 oz.
  • Overall Length: 4 9/16"/ 115.9 mm
  • Overall Width: 3 ¾"/95.3 mm
  • Arm adjusts with 1/8" Allen wrench and 5/16" socket wrench


*Designed for use on flat top electric guitars Bigsby Lightning Series Vibratos were created for players who want the Bigsby sound and "vibe", but for use on less expensive instruments.


Starting at $149.95
Click to read more
P-GKLU-KHBSCBridge - Kluson, Harmonica, Steel Chrome with Brass Saddles

This bridge, popularly referred to as the harmonica bridge is a direct replication of the original using all the same quality fabrication, dimensions and best of all, milled from steel billet to give you the tone you crave. Now there is finally a proper replacement for all those vintage Gibson guitars without having to modify the original instrument! Just when you thought you weren’t going to be able to restore your original hardware, Kluson comes through!


$149.95
Click to read more
P-GB5PL-AVibrato - Bigsby, B5, for Flat-Top Electric, Pinless String Bar

A genuine Bigsby B5 vibrato with a modified string mounting bar that features counterbore holes for a string-through style rather than the original mounting pins. This version allows for quick and easy restrings.


$149.95
Click to read more
P-PUMC-SSX-NPickup - McNelly, Stagger Swagger, Nickel

This McNelly Stagger Swagger pickup features a nickel plated cover, a braided-shield/single-conductor wire, and a 1 15/16" string spacing.


$145.00
Click to read more
P-PUMC-SSX-ONPickup - McNelly, Stagger Swagger, Open Nickel

This McNelly Stagger Swagger pickup features an open nickel plated cover, a braided-shield/single-conductor wire, and a 1 15/16" string spacing.


$145.00
Click to read more
P-GB60-XVibrato - Bigsby, B60, for large hollow-body guitars
Colors Available:

Bigsby B60 Lightning Series I Vibrato for use on large acoustic and arch top guitars. The Bigsby vibrato tailpiece is a type of vibrato device for electric guitar designed by Paul A. Bigsby. The device allows musicians to bend the pitch of notes or entire chords with their pick hand for various effects. Bigsby B-60 Specifications



  • Model Name: B-60
  • Series: Lightning Series I
  • Manufacturing Method: Die Cast
  • Manufacturing Material: Aluminum
  • Approximate weight: 308 grams/10.9 oz.
  • Overall Length: 8 5/8”/219.1 mm
  • Overall Width: 3 7/8”/ 98.4 mm
  • Arm adjusts with 1/8” Allen wrench and 5/16” socket wrench
  • Available in Stainless Steel or Gold


*Designed for use on large hollow body guitars


Starting at $135.95
Click to read more
P-NECK-S-01Neck - for Stratocaster Guitar, Maple, Headstock Adjust

Replacement Stratocaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 in. radius maple fingerboard. The nut width is 1 11/16 in. wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson® tuning machines. A thin clear satin finish makes this the perfect replacement for your modern Stratocaster®. Nut not included. Fender Licensed replacement neck.


$135.00
Click to read more
P-NECK-S-03Neck - for Stratocaster Guitar, Rosewood

Replacement Stratocaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 in. radius rosewood fingerboard. The nut width is 1 11/16 in. wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson® tuning machines. A thin clear satin finish makes this the perfect replacement for your modern Stratocaster®. Nut not included. Fender Licensed replacement neck. Heel width is 2 3/16".


$135.00
Click to read more

Pages

(67 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Guitar Parts & Pickups