Guitar Parts & Pickups

Blank pickguard material sheets for cutting custom pickguards, truss rod covers, and back plates. These sheets come in a variety of colors as well as single ply and three ply options. All colors feature a gloss surface.

Standard chrome cover for telecaster rhythm/neck position pickup.

• Chrome plated
• Overall measurements: 65.1mm/2.56” Length x 15.9mm/.62” Width
• Sold individually

Alnico 2 rod magnets with a .187” diameter. These magnets feature a vintage style chamfer and are not magnetized. Great for vintage Tele Style pickups and many others.

Genuine Bigsby® replacement spring for tremolo units. These springs are 7/8" (22.2mm) in length. 7/8" springs are the standard size included with most stock Bigsby® models.

Genuine Bigsby® replacement washer for tremolo units. This white plastic washer sits beneath the spring in the cup located on the frame. These washers reduce noise and potential damage to the spring and cup.

"F" Style 4 bolt neck plate as used on 1970s Fender® guitars

Strat style 4 bolt neck plate. (Mounting hardware not included). Four ¼” mounting holes. Made in Korea

Grover Vintage Tuners. 'Gibson Deluxe' Style. 3-Per-Side. Package of 6. 'Grover Deluxe' on tuners. 14:1 gear ratio This vintage machine uses a die-cast, two-piece housing for additional strength and precision. The unique bearing surface in the housing provides a rigid string post enhancing the alignment of the gear and worm. The 14:1 gear ratio provides for fine tuning.

Gotoh’s Telecaster bridge has the vintage look and mounting layout with a few modern additions: The In-Tune saddles give you the vintage look with unique grooves cast into the saddle to move the contact point of each string for more accurate intonation. Each saddle is reversible and can be used in any position. This gives you a huge advantage over traditional barrel style saddles that were never designed with precision intonation in mind. The brass saddles will give you that bright Tele twang! The stamped steel base plate’s cut down sides give you the unrestricted string access that many modern players prefer.

For non-tremolo fixed bridge Strat® style guitars that have through-body string mounting. Steel saddle. Saddle intonation can be individually adjusted. Mounting screws included. Hardware included.

U.S. made vintage style ABR-1 thumbwheels. These steel thumbwheels feature high quality plating and are tapped for 6-32 threaded posts.

The newest addition to the Grover family, these locking machine heads utilize the famous 18:1 Rotomatic® design with a “thumb screw” mechanism which locks the string into place. Insert the string through the post hole, wrap around once, then lock by tightening with the thumb screw. Perfect replacement for the most standard machine heads. Includes all mounting hardware. Includes 3 treble and 3 bass.

If you're trying to capture the original vintage tone of pure nickel wound strings; string up a set of Original 150s! Deliver a smooth feel with reduced finger noise. Rich, warm tone with abundant harmonics. Perfect for blues, jazz and classic rock. They're pure Fender tone through and through. Made in the USA. Pure Nickel Wound Gauge Sets: .010 - .046 contains .010, .013, .017, .026, .036, .046 .009 - .042 contains .009, .011, .016, .024, .032, .042 .011 - .049 contains .011, .014, .018, .028, .038, .049

Double ring. Replacement color-correct Keystone (tulip) press-on button for Kluson® tuning machines. Correct for vintage applications. Sold individually. See P-GKLU-SLN for single ring.

Phillips panhead machine screw, 10-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.

Bridge A modern version of the Tune-o-matic style bridge for the solidbody guitar. Pre-notched saddles with an individual saddle intonation screw retained by mini hex nuts for each one. Standard mounting post style and features hard zinc saddles. Hardware included.

Gibson style top hat knob. Fits fine knurled pot shafts.

Original Fender 6-32 screws for use on pickups and switches.

Genuine Bigsby® replacement spring for tremolo units. These springs are 11/16" (17.5mm) in length and are the shortest springs available from Bigsby®. 11/16" springs are shorter than the standard ⅞” (22.2mm) springs that are stock in most Bigsby models. This spring can be used to lower the trem arm.

Genuine Fender®. Package of 12 pieces of rubber tubing for pickup mounting on most Fender instruments with pickguard-mount pickups.

22 AWG stranded hook-up wire on a 50 foot roll. This wire is smaller than our other wire options which makes it perfect for tight spaces like effects pedal and other small electronic projects. Strands are tinned individually. See photo for detail.

Switchcraft Pickup Selector, replacement for Gibson L-Type. Similar to Gibson®. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG.

• Tip not included, see W-SC-W0X
• Nickel Finish

A traditional steel neck mounting plate for guitar or bass. Screws included.
For matching aged hardware, please check out the rest of the Gotoh Relic series:

• Dome Knobs - P-GGT-90
• Tele Bridge - P-GGT-85
• String Ferrules - P-GGT-87
• 6-in-a-line Tuners - P-GGT-81
• Strap Buttons - P-GGT-86-AC
• String Trees - P-GGT-92
• Control Plate - P-GGT-91

Single ring. Replacement color-correct Keystone (tulip) press-on button for Kluson® tuning machines. Correct for vintage applications. Sold individually. See P-GKLU-SLNDR for double ring.