Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
Screw - Fender®, for Neck Mounting
Genuine Fender® neck mounting screws. These neck mounting screws are chrome plated and are the standard screws included on most Fender® screws, Includes a full set of four Phillips screws.
$4.25
package of 4
Magnet - Bar, Alnico, Cast, 2.444", for pickups
Alnico cast bar magnets for use in humbucker and P-90 pickups. These are fully magnetized through the width and measure 2.444” x .5” x .125”.
$4.25
Nut - Bone, for Acoustic, 45mm x 10mm x 4.95mm
High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom feel and appearance.
  • Measures 45mm x 10mm x 4.95mm
  • Sold individually
$4.25
Nut - Bone, Oversized, 56mm x 11mm x 6.35mm
High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom fit and appearance.
  • Measures 56 mm x 11 mm x 6.35 mm
  • Sold individually
$4.25
On Backorder
Ferrules - Gotoh, TLB-1, for Guitar, Chrome
The Gotoh TLB-1 is a high quality set of guitar string ferrules. These press fit ferrules are a great choice for Telecaster® guitars or any guitar with a string through bridge. Includes six ferrules.
$4.25
package of 6
Bridge Pin Set - Original Fender, for acoustic
Colors Available:
Set of seven slotted bridge pins for use with most Fender acoustic guitars as well as other manufacturers. Includes extra bridge pin and matching strap end pin.
$4.25
package of 7
Nut - Bone, for Acoustic, 52.5mm x 10mm x 4.95mm
High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom fit and appearance.
  • Measures 52.5mm x 10mm x 4.95mm
  • Sold individually
$4.25
Screws - Fender®, for fastening pick guards
Original Fender pickguard screws. Set of 24 Phillips head screws (4x1/2") for pickguard and control plate mounting on most Fender instruments.
Starting at $4.25
package of 24
Baseplate - Tele, Vintage Correct, Cyanide Copper, USA
Original, made in USA, tele baseplate with vintage-correct specifications. This premium baseplate is made of steel and features a cyanide copper plating. The cyanide copper plating is not polished and will have varied appearances.
$4.34
Baseplate - Tele, Vintage Correct, Raw Steel, USA
Original, made in USA, tele baseplate with vintage-correct specifications. This premium baseplate is made of raw steel.
$4.34
Anchor Bushings - Fender® Bridge Pivot Screw Inserts
Original Fender® inserts for American Standard Tremolo, set of 2.
$4.35
package of 2
Keeper Bar - 10 Hole, 50mm, Raw Steel, USA
Original, made in USA, 10-hole keeper bar for 50mm spacing. The keeper bar is designed for use with soapbar P-90 pickups. The spare holes are for the pickup mounting screws. This premium keeper bar is made of raw steel.
$4.35
Keeper Bar - 10 Hole, 49.2mm, Raw Steel, USA
Original, made in USA, 10-hole keeper bar for 49.2mm spacing. This P.A.F. correct keeper bar is great for humbucker and P-90 pickups. Made of raw steel.
$4.35
Anchor Bushings - Metric Thread, Zinc, Set of 2
Pair of standard stop bar anchor bushings for stud mounts with fine knurling and fits most guitars using a 0.986” body depth for the anchors. Made from zinc. Pairs with P-GKLU-KLP1099X studs. Studs sold separately.
$4.39
$4.40
package of 2
Screw - Fender®, for Pickups and Switches
Original Fender 6-32 screws for use on pickups and switches.
$4.45
package of 12
Truss Rod Cover - bell shape, fits Gibson
Colors Available:
This truss rod cover will directly replace any Gibson two-screw bell shaped truss cover with no modifications. Mounts with (2) screws not included. Available in B/W/B or Cream
$4.45
Strap Buttons / Pins - Fender®, for American standard
Original Fender® American Standard Series strap buttons. Package includes:
  • 2 strap buttons
  • 2 screws
$4.45
package of 2
String Guide - Gotoh, RG105/RG130 Relic, Aged Nickel
Aged nickel for guitar. String guides are also known as string trees or string retainers. For matching aged hardware, please check out the rest of the Gotoh Relic series:
  • Dome Knobs - P-GGT-90
  • Tele Bridge - P-GGT-85
  • String Ferrules - P-GGT-87
  • 6-in-a-line Tuners - P-GGT-81
  • Strap Buttons - P-GGT-86-AC
  • Neck Plate - P-GGT-89
  • Control Plate - P-GGT-91
$4.50
package of 2
Fret Wire - 18% Nickel-Silver, 2 ft lengths, Small sizes
High quality 18% Nickel-Silver fret wire in small sizes.
  • 2mm - 2.1mm Crown Widths, (0.079" - 0.083")
  • 0.9mm - 1.3mm Crown Heights, (0.035" - 0.051")

Straight 2ft lengths sold individually or discounted by the pound. Per pound quantities SKU Qty Price P-GTFW-S-1 38 PRICE P-GTFW-S-2 31 PRICE P-GTFW-S-3 32 PRICE P-GTFW-S-4 26 PRICE P-GTFW-S-5 35 PRICE For additional sizes and options please see:
  • Medium Sizes - P-GTFW-M-X
  • Jumbo Sizes - P-GTFW-J-X
  • Stainless Steel - P-GTFW-STEEL-X

SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-S-1 2.0 mm (0.079") 0.9 mm (0.035") 2.5 mm (0.098") 0.5 mm (0.020") 0.83 mm (0.033")
Starting at $4.50
Wire - 20 AWG Stranded Core, Lacquered Cloth Cover, 600V
Colors Available:
#20 stranded copper wire with modern insulation and lacquered cotton braid finish. Provides safety and authentic vintage look. 105°C temperature rating, 600V. For a solid core version, see: S-W8XL
Starting at $4.50
Wire - 20 AWG Solid Core, Lacquered Cloth Cover, 600V
Colors Available:
#20 solid copper wire with modern insulation and lacquered cotton braid finish. 105°C temperature rating, 600V. For a stranded version, see: S-W7XL
Starting at $4.50
Nut - Graphite, for Fender, with Slots
Graphite nut for Fender® This graphite nut will work for most Fender® and similar style guitars. It is slotted, but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
  • Length = 1 41/64 inches (41.52mm)
  • Height #1 (fretboard side) = 13/64 inches (5.06mm)
  • Height #2 (headstock side) = 13/64 inches (5mm)
  • Thickness at bottom = 9/64 inches (3.46mm)
  • Thickness at top = 1/8 inches (3.1mm)
$4.55
Nut - Graphite, for Gibson, slotted
This graphite nut will work for most Gibson® and similar style guitars and basses. It is slotted but does require final shaping and fitting to exact size. PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
  • Length = 1 23/32 inches (43.75mm)
  • Height #1 (fretboard side) = 5/16 inches (7.81mm)
  • Height #2 (headstock side) = 9/32 inches (7mm)
  • Thickness at bottom = 15/64 inches (6.1mm)
  • Thickness at top = 3/16 inches (4.78mm)
$4.55