Guitar Parts & Pickups

This set of string guides includes the Gotoh RG105 and RG130 for string retention with a staggered height. One guide has a height of 2.5mm and the other has a height of 5mm achieved by using different sized standoffs. These string guides are a vintage style stamped leaflet. Mounting screws are included. String guides are also referred to as string trees or string retainers.

Original Orange™ amp knob with hex set screw. Fits 6 mm diameter shaft. Black top-hat style knob with with white dot indicator.

Genuine Dunlop / MXR knob for use with T18 knurled pot shafts. This is a smaller version of the classic MXR knob P-ECB-130. This knob is great for use on projects where a stylish knob is needed and space is limited.

2 pieces per set, screws included.

Standard chrome cover for telecaster rhythm/neck position pickup.

• Chrome plated
• Overall measurements: 65.1mm/2.56” Length x 15.9mm/.62” Width
• Sold individually

Jaguar style master control plate in chrome. Perfect replacement for most Jaguar style guitars. 4.12” x 1.86” plate mounting center distance (0.14” diameter, recessed).

Genuine Dunlop replacement small knurled knob for MXR pedals. Push -on style knob designed for use with coarse knurled shafts.

Original, made in USA, tele baseplate with vintage-correct specifications. This premium baseplate is made of steel and features a cyanide copper plating. The cyanide copper plating is not polished and will have varied appearances.

The new Kluson® Supreme series tuners have an 18:1 gear ratio in the traditional stamped steel housing. Designed for use on headstocks using vintage style press fit bushings. Mounting screws and bushings included.

• 6-in-line orientation
• Metal,oval button
• Safety post
• Precise 18:1 gear ratio

Original Fender knobs for the Telecaster. Chrome Dome.

For use on the entire fretboard, headstock, front,sides, back and pickguards. Also cleans and lubes bridge saddles, fine tuners on locking tremolo systems, tuning machine knobs and posts. US made with US materials, 4 oz.

"F" Style 4 bolt neck plate as used on 1970s Fender® guitars

If you're trying to capture the original vintage tone of pure nickel wound strings; string up a set of Original 150s! Deliver a smooth feel with reduced finger noise. Rich, warm tone with abundant harmonics. Perfect for blues, jazz and classic rock. They're pure Fender tone through and through. Made in the USA. Pure Nickel Wound Gauge Sets: .010 - .046 contains .010, .013, .017, .026, .036, .046 .009 - .042 contains .009, .011, .016, .024, .032, .042 .011 - .049 contains .011, .014, .018, .028, .038, .049

High quality USA made steel anchor bushings available in long or short lengths with a coarse or fine knurl for a variety of stop tailpiece uses. These bushings fit 5/16 – 24 US Threaded studs. Studs sold separately.

Replacement screw on buttons for sealed diecast tuners. These classic button shapes can easily be swapped to give tuner sets a new style. All replacement buttons fit tuner shafts with 3.6mm diameters flatted to 2.9mm and M2.5-0.45 internal threading. Buttons are sold individually and include a mounting screw.

Fender Telecaster / P-Bass knurled barrel knobs in chrome.

Switchcraft 3 Position Pickup Selector, replacement for Gibson L-Type. Similar to Gibson®. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG.
Tip not included, see W-SC-W0X

Nickel Finish

The Gotoh GE1996T is a high end locking tremolo licensed by Floyd Rose. This version of the locking tremolo is a premium option that is great for new installs or upgrading original units. The hardened steel saddles and patented stud lock technology ensure a rock solid performance. Springs, spring claw, and all mounting hardware are included along with two hex wrenches for dialing in adjustments. 40mm block.

High quality stainless steel fret wire available in popular sizes. Straight 2ft lengths sold individually or by the pound. For standard 18% Nickel-Silver options please see:

• Small Sizes - P-GTFW-S-X
• Medium Sizes - P-GTFW-M-X
• Jumbo Sizes - P-GTFW-J-X

SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-STEEL-1 2.0 mm (0.079") 1.0 mm (0.039") 2.8 mm (0.110") 0.6 mm (0.024") 0.95 mm (0.037") Similar size to Dunlop 6260, Stew Mac 147, commonly used on Vintage Fender, Banjos, Pre-War Gibsons P-GTFW-STEEL-2 2.4 mm (0.095") 1.2 mm (0.047") 2.8 mm (0.110") 0.6 mm (0.024") 0.95 mm (0.037") A popular tall and narrow style, similar size to Stew Mac 141 P-GTFW-STEEL-3 2.7 mm (0.106") 1.4 mm (0.055") 3.2 mm (0.126")

Genuine Fender®. Package of 12 pieces of rubber tubing for pickup mounting on most Fender instruments with pickguard-mount pickups.

These guitar machines are a triumph in engineering and styling. The housing provides a maximum bearing for worm, gear and string post. Gear ratio is 14:1. Worm and gear are precision-cut for perfect meshing. This eliminates backlash and slippage. Countersunk tension screw permits player to regulate turning tension to any degree. Gear box has a special lubricant for lifetime, trouble-free service. Includes 5/8” washers, bushings and wood screws.

Genuine Bigsby® replacement spring for tremolo units. These springs are 7/8" (22.2mm) in length. 7/8" springs are the standard size included with most stock Bigsby® models.

Machine heads without a sealed gear are criticized for not having the same smooth performance, efficiency and durability that sealed gear tuners have. The SD series solves these problems by combining "Rock-solid" technology and the post collar or: "Self-Center Guide", found on enclosed gears in the base plate of the gear allowing the post to perfectly align itself with the bushing which attaches the gear to the headstock. The SD series uses a torque balancer to ensure steady rotation of the tuner button giving high quality sound performance as well as great functionality. Through its use of the ideal materials selected for each component part you also obtain a far superior sound. These are 3+3 (Three on a side) configuration. Mounting hardware included. 1:15 gear ratio.

This set of string guides includes the Gotoh RG15 and RG30 for string retention with a staggered height. One guide has a height of 2.5mm and the other has a height of 5mm achieved by using different sized standoffs. These string guides are a modern style machined metal with improved tuning stability. Mounting screws are included. String guides are also referred to as string trees or string retainers.