Guitar Parts & Pickups

The Original Grover® Sta-Tite machine head. The classic styling of the Sta-Tite returns with the Grover® name. The butter bean button identifies this as the original. A 14:1 gear ratio provides precise tuning. Wood screws, washers and bushing included.

#8 x 1.5” inch neck mounting screws. These neck mounting screws are chrome plated and are the standard screws used on many bolt-on neck guitars. Includes a full set of four Phillips screws.

Original, made in USA, P.A.F.-correct bobbins for making humbucker pickups. These screw side bobbins are made of butyrate molded in casts of the originals and feature a 49.2mm spacing.

This set of string guides includes the Gotoh RG105 and RG130 for string retention with a staggered height. One guide has a height of 2.5mm and the other has a height of 5mm achieved by using different sized standoffs. These string guides are a vintage style stamped leaflet. Mounting screws are included. String guides are also referred to as string trees or string retainers.

Original, made in USA, P.A.F.-correct humbucker frame with long legs. This premium baseplate has a 49.2mm spacing and is made of raw nickel silver.

For non-tremolo fixed bridge Strat® style guitars that have through-body string mounting. Steel saddle. Saddle intonation can be individually adjusted. Mounting screws included. Hardware included.

Original Fender® American Standard Series strap buttons. Package includes:

• 2 strap buttons
• 2 screws

Stamped nickel baseplate for building or repairing a 7 string pickup.

• 61.2mm/2.40” spacing(outer holes center to center)
• 88.9mm/3.50”mounting screw hole spacing (center to center)
• .03” stamped nickel construction
• Sold individually

Generic plastic jack plate. Fits Les Paul and other guitars. Mount the guitar's output jack in the ⅜" hole in the center of the jack plate.

Brass tremolo stopper. Used as a floating bridge stop for Fender and Floyd Rose style tremolo systems. Prevents inadvertent vibrato effects produced by resting the picking hand over the bridge while playing. Allows for down-bends and prevents up-bends for a stabilized return of the whammy bar. Allen screw can be easily reversed to allow for a floating bridge setup again. Includes: (1) brass block (1.05" L x .39" W x .49" H) (1) allen key, 2 mm (1) allen screw (M4 x .70 thread, 20 mm length) (1) hex nut (M4 x .70 thread) (2) countersunk mounting screws (10 mm length)

Genuine Bigsby spring pack. This pack comes with all of the Bigsby spring sizes along with the nylon spring washer and fiber handle washer. Item Qty BigSby Part Number 11/16" long spring 1 0495-1964 7/8" long spring 1 0495-1967 1" long spring 1 0495-1975 1 1/8" long spring 1 0495-1978 Handle washer 1 0495-2331 Spring washer 1 0495-0410

5-way pickup selector switch for Stratocasters. Black switch tip.

Genuine Dunlop / MXR knob for use with T18 knurled pot shafts. This is a smaller version of the classic MXR knob P-ECB-130. This knob is great for use on projects where a stylish knob is needed and space is limited.

Set of hex set screws used for saddle-height adjustment on American Vintage series Stratocaster and Telecaster bridges.

• Set of 12 hex set screws
• For American Vintage Stratocaster and Telecaster guitars
• Comes with four 4-40 x 3/8" hex screws and eight 4-40 x 5/16" hex screws.

Switchcraft 3 Position Pickup Selector, replacement for Gibson L-Type. Similar to Gibson®. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG.
Tip not included, see W-SC-W0X

Nickel Finish

Fender® vintage strap buttons. Designed to fit most Fender instruments. All mounting hardware included.

Stratocaster style 3 ply pickguard with 11 mounting holes. Top and bottom layers are the same with an alternate middle layer.

The B5, sometimes referred as the Bigsby "horseshoe" is designed for flat top solid body guitars. Attaching via four screws to a guitar's top, the B5 is extremely versatile. B5s are common on many styles of guitars including SGs, Les Paul Jrs, Telecasters, and Rickenbacker 325s. Bigsby B5 Specifications

• Model Name: B-5
• Series: Original Kalamazoo Line
• Manufacturing Method: Cast
• Manufacturing Material: Aluminum
• Approximate Weight: 287 Grams
• Overall Length: 4.75"/120.65mm
• Overall Width: 3.7"/93.98mm

A traditional steel neck mounting plate for guitar or bass. Screws included.
For matching aged hardware, please check out the rest of the Gotoh Relic series:

• Dome Knobs - P-GGT-90
• Tele Bridge - P-GGT-85
• String Ferrules - P-GGT-87
• 6-in-a-line Tuners - P-GGT-81
• Strap Buttons - P-GGT-86-AC
• String Trees - P-GGT-92
• Control Plate - P-GGT-91

Tremolo arm with white tip, for use on Mexican Standard and most Standard and Deluxe series Stratocaster models manufactured from 1986-present.

Fender® replacement string ferrules for Original Tele (6 ferrules)

High quality 18% Nickel-Silver fret wire in medium sizes.

• 2.3mm - 2.4mm Crown Widths, (0.091" - 0.095")
• 1.1mm - 1.3mm Crown Heights, (0.043" - 0.051")

Straight 2ft lengths sold individually or by the pound. For additional sizes and options please see:

• Small Sizes - P-GTFW-S-X
• Jumbo Sizes - P-GTFW-J-X
• Stainless Steel - P-GTFW-STEEL-X

SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-M-1 2.3 mm (0.091") 1.1 mm (0.043") 2.6 mm (0.102") 0.65 mm (0.026") 0.95 mm (0.037") A popular medium size for electric guitars P-GTFW-M-2 2.4 mm (0.095") 1.2 mm (0.047") 2.8 mm (0.110") 0.60 mm (0.024") 0.95 mm (0.037") A popular tall and narrow style, similar size to Stew Mac 141 P-GTFW-M-3

High-quality USA made knobs from Rogan Corp. These solid phenolic knobs feature a brushed metal inlay in their unique diamond shaped grip. Often referred to as TV or cooker knobs, these genuine Rogans are used in a variety of Rickenbacker guitars and basses. In addition to the diamond shaped grip, they feature a large skirt and a small notched indicator. Fits ¼" shaft potentiometers.

• Height: 0.635 in.
• Length: 1.497 in.
• Fits ¼" shaft with set screw

Original Fender 250s: The "high-octane" nickel plated steel string for your electric guitar. With a pure steel wrap, the magnets in your pickups use the whole string, not just the core, and transform the energy into high output bursts of sound. The nickel plating enhances feel while reducing "string squeak" and fret wear without compromising tone. Combine the high output and dynamic sound of steel with the smooth feel of nickel; perfect for rock and other styles of music where the guitar needs to cut through. Original equipment on all U.S. made Fender® electric guitars. Ball End. Made in the USA Nickel Plated Steel Gauge Sets: .009 - .042 contains .009, .011, .016, .024, .032, .042 .011 - .049 contains .011, .014, .018, .028, .038, .049 .010 - .046 contains .010, .013, .017, .026, .036, .046