Guitar Parts & Pickups

Machine heads without a sealed gear are criticized for not having the same smooth performance, efficiency and durability that sealed gear tuners have. The SD series solves these problems by combining "Rock-solid" technology and the post collar or: "Self-Center Guide", found on enclosed gears in the base plate of the gear allowing the post to perfectly align itself with the bushing which attaches the gear to the headstock. The SD series uses a torque balancer to ensure steady rotation of the tuner button giving high quality sound performance as well as great functionality. Through its use of the ideal materials selected for each component part you also obtain a far superior sound. These are 3+3 (Three on a side) configuration. Mounting hardware included. 1:15 gear ratio.

Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires.

#8 x 1.5” inch neck mounting screws. These neck mounting screws are chrome plated and are the standard screws used on many bolt-on neck guitars. Includes a full set of four Phillips screws.

Original, made in USA, P.A.F.-correct bobbins for making humbucker pickups. These screw side bobbins are made of butyrate molded in casts of the originals and feature a 49.2mm spacing.

For non-tremolo fixed bridge Strat® style guitars that have through-body string mounting. Steel saddle. Saddle intonation can be individually adjusted. Mounting screws included. Hardware included.

Original, made in USA, P.A.F.-correct humbucker frame with long legs. This premium baseplate has a 49.2mm spacing and is made of raw nickel silver.

Original Fender® American Standard Series strap buttons. Package includes:

• 2 strap buttons
• 2 screws

This set of string guides includes the Gotoh RG105 and RG130 for string retention with a staggered height. One guide has a height of 2.5mm and the other has a height of 5mm achieved by using different sized standoffs. These string guides are a vintage style stamped leaflet. Mounting screws are included. String guides are also referred to as string trees or string retainers.

Stamped nickel baseplate for building or repairing a 7 string pickup.

• 61.2mm/2.40” spacing(outer holes center to center)
• 88.9mm/3.50”mounting screw hole spacing (center to center)
• .03” stamped nickel construction
• Sold individually

Generic plastic jack plate. Fits Les Paul and other guitars. Mount the guitar's output jack in the ⅜" hole in the center of the jack plate.

Genuine Bigsby spring pack. This pack comes with all of the Bigsby spring sizes along with the nylon spring washer and fiber handle washer. Item Qty BigSby Part Number 11/16" long spring 1 0495-1964 7/8" long spring 1 0495-1967 1" long spring 1 0495-1975 1 1/8" long spring 1 0495-1978 Handle washer 1 0495-2331 Spring washer 1 0495-0410

A traditional steel neck mounting plate for guitar or bass. Screws included.
For matching aged hardware, please check out the rest of the Gotoh Relic series:

• Dome Knobs - P-GGT-90
• Tele Bridge - P-GGT-85
• String Ferrules - P-GGT-87
• 6-in-a-line Tuners - P-GGT-81
• Strap Buttons - P-GGT-86-AC
• String Trees - P-GGT-92
• Control Plate - P-GGT-91

The Original Grover® Sta-Tite machine head. The classic styling of the Sta-Tite returns with the Grover® name. The butter bean button identifies this as the original. A 14:1 gear ratio provides precise tuning. Wood screws, washers and bushing included.

Genuine Dunlop / MXR knob for use with T18 knurled pot shafts. This is a smaller version of the classic MXR knob P-ECB-130. This knob is great for use on projects where a stylish knob is needed and space is limited.

5-way pickup selector switch for Stratocasters. Black switch tip.

Brass tremolo stopper. Used as a floating bridge stop for Fender and Floyd Rose style tremolo systems. Prevents inadvertent vibrato effects produced by resting the picking hand over the bridge while playing. Allows for down-bends and prevents up-bends for a stabilized return of the whammy bar. Allen screw can be easily reversed to allow for a floating bridge setup again. Includes: (1) brass block (1.05" L x .39" W x .49" H) (1) allen key, 2 mm (1) allen screw (M4 x .70 thread, 20 mm length) (1) hex nut (M4 x .70 thread) (2) countersunk mounting screws (10 mm length)

Switchcraft 3 Position Pickup Selector, replacement for Gibson L-Type. Similar to Gibson®. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG.
Tip not included, see W-SC-W0X

Nickel Finish

Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm at highest point with flat bottom.

Set of hex set screws used for saddle-height adjustment on American Vintage series Stratocaster and Telecaster bridges.

• Set of 12 hex set screws
• For American Vintage Stratocaster and Telecaster guitars
• Comes with four 4-40 x 3/8" hex screws and eight 4-40 x 5/16" hex screws.

Stratocaster style 3 ply pickguard with 11 mounting holes. Top and bottom layers are the same with an alternate middle layer.

The B5, sometimes referred as the Bigsby "horseshoe" is designed for flat top solid body guitars. Attaching via four screws to a guitar's top, the B5 is extremely versatile. B5s are common on many styles of guitars including SGs, Les Paul Jrs, Telecasters, and Rickenbacker 325s. Bigsby B5 Specifications

• Model Name: B-5
• Series: Original Kalamazoo Line
• Manufacturing Method: Cast
• Manufacturing Material: Aluminum
• Approximate Weight: 287 Grams
• Overall Length: 4.75"/120.65mm
• Overall Width: 3.7"/93.98mm

Fender® replacement string ferrules for Original Tele (6 ferrules)

Fender® vintage strap buttons. Designed to fit most Fender instruments. All mounting hardware included.

High-quality USA made knobs from Rogan Corp. These solid phenolic knobs feature a brushed metal inlay in their unique diamond shaped grip. Often referred to as TV or cooker knobs, these genuine Rogans are used in a variety of Rickenbacker guitars and basses. In addition to the diamond shaped grip, they feature a large skirt and a small notched indicator. Fits ¼" shaft potentiometers.

• Height: 0.635 in.
• Length: 1.497 in.
• Fits ¼" shaft with set screw