You are here

Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(64 pages)
P-B-THUMBThumb rest - Fender®, for P-Bass and J-Bass, black

Original Fender® black thumb rest replacement for Precision and Jazz Bass. Mounting hardware included.


$4.75
$4.28
You save: 10%
Click to read more
P-GTNN06Nut - Graphite, for Fender
This graphite nut blank will work for most Fender® and similar style guitars and basses. It is NOT slotted and does require final shaping and fitting to exact size. It has a radiused bottom.
  • Length = 2 1/64 inches (51.25mm)
  • Height = 11/64 inches (4.55mm)
  • Thickness = 1/8 inch (3.1mm)
$4.55
$4.10
You save: 10%
Click to read more
P-GTNN06-SLOTNut - Graphite, for Fender, with Slots
Graphite nut for Fender® This graphite nut will work for most Fender® and similar style guitars. It is slotted, but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
  • Length = 1 41/64 inches (41.52mm)
  • Height #1 (fretboard side) = 13/64 inches (5.06mm)
  • Height #2 (headstock side) = 13/64 inches (5mm)
  • Thickness at bottom = 9/64 inches (3.46mm)
  • Thickness at top = 1/8 inches (3.1mm)
$4.55
$4.10
You save: 10%
Click to read more
P-GTNN08Nut - Graphite, for Gibson
This graphite nut will work for most Gibson® and similar style guitars and basses. It is slotted but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
  • Length = 1 23/32 inches (43.75mm)
  • Height #1 (fretboard side) = 5/16 inches (7.81mm)
  • Height #2 (headstock side) = 9/32 inches (7mm)
  • Thickness at bottom = 15/64 inches (6.1mm)
  • Thickness at top = 3/16 inches (4.78mm)
$4.55
$4.10
You save: 10%
Click to read more
P-GTSJP-XJack Plate - for Stratocaster
Colors Available:

Replacement jack plate for Stratocasters


$4.55
Starting at $4.10
You save: 10%
Click to read more
P-GTARMV01Tremolo arm - for Vintage Stratocaster
Tremolo Arm, Screw-Down, Steel 5mm-0.8p
  • Material: Steel 5mm
  • Handle Type: Screw-down
  • Thread: M5.0 - 0.8p
  • Plating: Chrome
  • Tip: White
$4.50
$4.05
You save: 10%
Click to read more
P-GTNP4-CNeck Plate - 4-Hole, Chrome

Replacement chrome 4 bolt neck plate. 4 screws included.


$4.50
$4.05
You save: 10%
Click to read more
P-GT100XTruss Rod Cover - Fits Gibson
Colors Available:
This truss rod cover will directly replace any Gibson two-screw bell shaped truss cover with no modifications. Mounts with (2) screws not included. Available in B/W/B or Cream
$4.45
$4.00
You save: 10%
Click to read more
P-GTNN04Nut - Bone, for Fender, 44.45mm X 3.3mm X 6.35, Radiused
Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm with radiused bottom.
$4.25
$3.83
You save: 10%
Click to read more
P-GB-PIN-XPin - Bigsby, Roller
Colors Available:

Genuine Bigsby® replacement roller pin. This roller pin is stock to the B5 and B7 vibrato units.


$4.25
Starting at $3.83
You save: 10%
Click to read more

Pages

(64 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Guitar Parts & Pickups