Guitar Parts & Pickups

Genuine Bigsby® replacement flat handle with pre-installed stud. This flat handle is the stock handle used on most Kalamazoo Series vibratos.

Bigsby B5 with Fender® Logo kit for Telecaster® guitars. This kit includes every part required to fit an “F” logo B5 to a standard Telecaster® using the Bigsby bridge and bridge plate. The B5, sometimes referred to as the Bigsby "horseshoe" is designed for flat top solid body guitars and attaches via four screws to a guitar's top.

Bigsby B5 kit for Telecaster® guitars. This kit includes every part required to fit a B5 to a standard Telecaster® using the Bigsby bridge and bridge plate. The B5, sometimes referred to as the Bigsby "horseshoe" is designed for flat top solid body guitars and attaches via four screws to a guitar's top. The B5 is an extremely versatile vibrato unit. Includes

• Complete B5 Tailpiece with Mounting Hardware
• Bigsby Telecaster Bridge Plate with Studs and Anchors
• Bigsby Telecaster Bridge with Mounting Hardware

Bigsby B5 Specifications

• Model Name: B-5
• Series: Original Kalamazoo Line
• Manufacturing Method: Cast
• Manufacturing Material: Aluminum
• Approximate Weight: 287 Grams
• Overall Length: 4.75"/120.65mm
• Overall Width: 3.7"/93.98mm

Note: Some drilling is required.

Full set of replacement washers for Grover tuners. These are the washers that are between the arm of the tuner and the tuner’s knob. All three washers are used on a single tuner. Includes 6 nylon washers, 6 spring washers, and 6 flat washers.

#20 solid copper wire with modern insulation and lacquered cotton braid finish. 105°C temperature rating, 600V. For a stranded version, see: S-W7XL

#20 stranded copper wire with modern insulation and lacquered cotton braid finish. Provides safety and authentic vintage look. 105°C temperature rating, 600V. For a solid core version, see: S-W8XL

600V solid wire. UL style 1015, rated to 105 degrees C. Perfect for new projects, rewiring electrical equipment, or use in breadboards, perfboard, and veroboard/stripboard.

22 AWG stranded hook-up wire on a 50 foot roll. This wire is smaller than our other wire options which makes it perfect for tight spaces like effects pedal and other small electronic projects. Strands are tinned individually. See photo for detail.

600V stranded. Strands are tinned individually. See photos for detail. UL style 1015, rated to 105 degrees C. Perfect for new projects or rewiring any electrical equipment.

Shielded 4-conductor wire used in wiring pickups, controls etc. Shielded 4-conductor wire is commonly used in humbucking pickups to allow more wiring flexibility over the 2-conductor setup. Building a pickup using 4-conductor wire will allow you to wire up coil cut, phase switching, and series/parallel configurations. Additionally, 2 conductor pickups can be converted to 4-conductor using this wire.

• Sold per foot
• 28 AWG
• Foil shield
• 12”/3.2mm outer diameter
• Sold individually

Solid tinned copper bus wire. 105°C temperature rating, 600V.

Solid tinned copper bus wire. Great for point to point builds, guitar electronics wiring, or any situation where insulated wire is not required. 105°C temperature rating, 600V. Sold by the foot. For 100ft spools, please see S-W428X.

105°C rating, 600V. Solid core.

Insulated with two coats of enamel. Perfect for winding coils or transformers. 21 Gauge, 100 foot spool. 105°C temperature rating, 600V.

Insulated with two coats of enamel. Perfect for winding coils or transformers. 22 gauge, 100 foot. 105°C temperature rating, 600V.

Insulated with two coats of enamel. Perfect for winding coils or transformers. 24 gauge, 200 foot. 105°C temperature rating, 600V.

Insulated with two coats of enamel. Perfect for winding coils or transformers. 28 gauge, 200 foot. 105°C temperature rating, 600V.

Insulated with two coats of enamel. Perfect for winding coils or transformers. 32 gauge, 400 foot. 105°C temperature rating, 600V.

Insulated with two coats of enamel. Perfect for winding coils or transformers. 40 gauge, 750 foot spool. 105°C temperature rating, 600V.

High quality 42AWG Elektrisola P155 magnet wire with heavy (two coats) enamel. Perfect for winding coils, pickups, or transformers. Properties

• Very good solderability
• High thermal properties

Applications

• Small transformers
• Relays
• Solenoids
• Small motors
• Watch coils
• Transformers
• Instruments

Please note: Product length is based on weight and may vary slightly from the listed values. SKU Weight Approx. Length S-MW-42-2OZ 2 oz. 6200 ft S-MW-42-4OZ 4 oz. 12400 ft S-MW-42-8OZ 8 oz. 24800 ft S-MW-42-1LB 1 lb 49600 ft

Vintage style push back wire. Especially useful for building or repairing single coil pickups. Push-back style eliminates the need for stripping.

• Outer diameter: 0.07"
• Sold by the foot

Original, made in USA, #2 x ½” wood screws. These premium screws are made of raw brass and are perfect for mounting bobbins to baseplates. These are reproductions of the PAF style mounting screws.

Original, made in USA, #3 x 1-3/8” wood screws. These premium screws are nickel plated and are perfect for pickups that are directly mounted to the guitar body such as P-90 and Thunderbird pickups.

The ZipWire™ Kit provides a convenient way to connect the signals in your projects. The wires can be unzipped for individual wires as needed and the color-coding can be used to organize power, ground and other signal types to keep your circuit organized. The rainbow colored ribbon cable provides the 10 standard electrical colors.