You are here

Guitar Parts

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(57 pages)
S-CDUCKLubrication - Dr. Duck's, Ax Wax & String Lube, Organic
For use on the entire fretboard, headstock, front,sides, back and pickguards. Also cleans and lubes bridge saddles, fine tuners on locking tremolo systems, tuning machine knobs and posts. US made with US materials, 4 oz.
$7.95
$7.16
You save: 10%
Click to read more
P-GTARMV01Tremolo arm - for Vintage Stratocaster
Tremolo Arm, Screw-Down, Steel 5mm-0.8p
  • Material: Steel 5mm
  • Handle Type: Screw-down
  • Thread: M5.0 - 0.8p
  • Plating: Chrome
  • Tip: White
$3.95
$3.56
You save: 10%
Click to read more
P-GTFW6130Fret wire - Dunlop, large, for early Gibson
Dunlop®, 6130,.036" x.106", 28% nickel/silver, hard alloy, 2 5/8" long, large/jumbo size, good on early Gibson®, 24 pieces
$12.86
$11.57
You save: 10%
Click to read more
P-GTNN06-SLOTNut - Graphite, for Fender, with Slots
Graphite nut for Fender® This graphite nut will work for most Fender® and similar style guitars. It is slotted, but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
  • Length = 1 41/64 inches (41.52mm)
  • Height #1 (fretboard side) = 13/64 inches (5.06mm)
  • Height #2 (headstock side) = 13/64 inches (5mm)
  • Thickness at bottom = 9/64 inches (3.46mm)
  • Thickness at top = 1/8 inches (3.1mm)
$4.55
$4.10
You save: 10%
Click to read more
P-GTNP-4C-FNDNeck Plate - Fender®, 4-Bolt 70s "F" Style, Chrome

"F" Style 4 bolt neck plate as used on 1970s Fender® guitars


$10.25
$9.23
You save: 10%
Click to read more
S-MW-40-750Pickup Parts - Magnet Wire, 40 Gauge, 750' spool

Insulated with two coats of enamel. Perfect for winding coils or transformers. 40 gauge, 750 foot spool. 105°C temperature rating, 600V.


$6.95
$6.26
You save: 10%
Click to read more
P-GTNN07Nut - Bone, for Gibson, 43mm X 5.9mm X 8mm, Flat
Bone nut for Gibson®, 43mm x 5.9mm x 8mm at highest point with flat bottom.
$5.55
$5.00
You save: 10%
Click to read more
P-GTNP-SCREWSScrew - Fender®, Neck Mounting

Fender® neck mounting screws (4 pack)


$3.95
$3.56
You save: 10%
Click to read more
P-PUGRET1Pickup - Gretsch, Filtertron, bridge, nickel

Filtertron pickup, bridge position, nickel. Outer Dimensions: 2.79" x 1.32" (depth = 0.73") Mounting Centers: 2.50" FilterTron pickups are now made with alnico magnets as they were originally made in the 1950s and 60s.


$84.95
$76.46
You save: 10%
Click to read more
S-MW-42-XWire - Magnet, 42 AWG

Insulated with two coats of enamel. Perfect for winding coils or transformers. 42 gauge. 105°C temperature rating, 600V. Please note: Product length is based on weight and may vary slightly from the listed values.


$6.95
Starting at $6.25
You save: 10%
Click to read more

Pages

(57 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Guitar Parts