Guitar Parts & Pickups

Original Fender® vintage-style neck plate for use on most U.S. and Mexico-made Fender guitars and basses using four-screw neck mounting without Micro-Tilt™ adjustment. Mounting screws included.

Original Fender® string guide, American Series, chrome, package of two.
String guides are also known as string trees or string retainers.

Replacement pickguard for Telecaster guitars. These pickguards feature five mounting holes. Cut from a thicker single ply sheet, these pickguards offer a vintage style with added rigidity.

Two piece rosewood bridge with metal saddle. Adjustable style. 6” wide. For 6 or 12-string guitars with a tailpiece.

Fender® Telecaster string guide Features:

• Plated-steel single-disc string guide (string tree)
• Minimizes sympathetic overtones caused by low string tension over the nut
• Includes string guide and slotted mounting screw
• Originally used on early ‘50s Telecaster and Esquire® guitars
• Fits most vintage and modern Telecaster® guitars

1:15 gear ratio. Hardware included.

High quality 18% Nickel-Silver fret wire in jumbo sizes.

• 2.6mm - 3.0mm Crown Widths, (0.102" - 0.118")
• 1.0mm - 1.45mm Crown Heights, (0.039" - 0.057")

Straight 2ft lengths sold individually or discounted by the pound. Per pound quantities SKU Qty Price P-GTFW-J-1 28 PRICE P-GTFW-J-2 26 PRICE P-GTFW-J-3 25 PRICE P-GTFW-J-4 22 PRICE P-GTFW-J-5 18 PRICE P-GTFW-J-6 21 PRICE P-GTFW-J-7 19 PRICE For additional sizes and options please see:

• Small Sizes - P-GTFW-S-X
• Medium Sizes - P-GTFW-M-X
• Stainless Steel - P-GTFW-STEEL-X

SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-J-1 2.6 mm (0.102") 1.0 mm (0.039"

Screw - Machine, Phillips Flat Head, 10-32 x 1 in., Stainless, package of 5
Nut - T-Nut, Zinc, 10-32, package of 5
Hardware only. Amp handle not included.

Original Fender® black thumb rest replacement for Precision and Jazz Bass. Mounting hardware included.

If you are looking for a tremolo that is designed for enhanced sustain and better reliability, then you have found it. The VSVG Vintage tremolo features enlongated baseplate holes so the screws won't bind and it gives a very smooth, accurate return to pitch. With the string mounting holes being staggered in the steel block you will find much more tuning stability because of the more consistent string angle over the adjustable locking bent-steel saddles. Hardware included.

Made in U.S. Modern spec tune-o-matic bridge. No retaining wire. Plated, preslotted saddles. Hardware included This is an awesome OEM bridge for builders or the DIY repairman offering a longer adjustment area and more mass than the original ABR-1 bridge. It matches Gibson specifications and is a drop-in, non-modification required replacement part.

• Thread = M5 - 0.8 Metric (as used by Gibson on Nashville Models)
• Post to Post Spacing = 2.93 in. (74.5mm)
• Saddle Notch = Center Notched Saddles
• Saddle Material = Zmac
• Bridge Material = Zmac
• Post/Thumbwheel Material = Brass
• Radius = 12 inch
• Post Top Diameter = .195 Inches / 4.95mm
• Bridge Center To Center Spacing = 2.93 inches
• Saddle Spacing = 10.4 mm

Fender® Stratocaster string guides (2 pack)
String guides are also known as string trees or string retainers.

Genuine Fender replacement chrome bridge assembly for use with most Standard series Telecaster models manufactured from 2004-present (does not retrofit to a three-screw mounting design without modification). Bridge pickup and mounting hardware not included.

• Chrome bridge assembly
• Six adjustable block saddles
• Four-screw mounting design
• Mounting hardware not included
• For Standard Series Telecaster models (2004-present)

Genuine Fender replacement knob cap for S-1 switch, which can be retrofitted to nearly any U.S.- and Mexico-made Stratocaster manufactured from 1954-present.
Direct Replacement for P-K358X

Jaguar style preset control plate in chrome. Perfect replacement for most Jaguar style guitars. 4.57” x 1.79” plate mounting center distance (0.14” diameter, recessed).

The V-Treb Variable Treble Bleed Circuit for guitar and bass is available pre-installed on high quality volume pots from CTS and Bourns. The circuit corrects the problem of high frequency losses at reduced volumes by allowing the player to control how bright or warm the tone will get as the volume control is reduced. Turning the trim pot clockwise increases the amount of treble bypass for a brighter sound at reduced volumes. Turning the trim pot counter clockwise reduces the amount of treble bypass for a warmer tone at reduced volumes. With the volume at 10, the V-Treb is removed from the circuit and does not affect the sound. The V-Treb circuit also also available separately for use on any other volume pot.

Pickguards for Gibson® Les Paul® guitars with two humbucker pickups. Mounting bracket is sold separately. See P-GKLU-KLP1731C. See dimensional drawing below for size details.

Round back cover for Gibson® Les Paul® switch cavities. These switch covers are made of single-ply material with three mounting holes and a foil backing.

U.S. made threaded posts for ABR-1 bridges. The brass posts feature a high quality plating and a #6-32 threading. Each post is 1 1/16” in length. This vintage style of post is meant to mount directly to the body of the guitar.

Go ahead and jump! You're protected by Fender® strap locks

Backplate cover for Gibson® Les Paul® electronics cavities. These covers are made of single-ply material with four mounting holes and a foil backing.

These guitar machines are a triumph in engineering and styling. The housing provides a maximum bearing for worm, gear and string post. Gear ratio is 14:1. Worm and gear are precision-cut for perfect meshing. This eliminates backlash and slippage. Countersunk tension screw permits player to regulate turning tension to any degree. Gear box has a special lubricant for lifetime, trouble-free service. Includes ⅝" washers, bushings and wood screws.

Chrome-plated steel bridge plate for use on American Vintage, Classic and Road Worn® series Telecaster® models.

• String-through-body three-saddle design
• Mounting hardware and bridge saddles not included

Fender® replacement pre-cut standard fret wire (24 pieces). Pre-radiused to 9.5"
Features:

• 24 pre-cut standard frets for guitar fingerboards
• Pre-radiused to 9.5"
• Each piece .046" tall and .103 wide