 | Tailpiece Studs - Kluson, Metric Stop, Steel, .781 inch, pkg/2 U.S. made quality .781 in. (short) stoptail studs in metric threading. Five step plating process for extra durability. Set of 2.
This is the new Kluson® standard stop bar stud with metric thread made in steel for added strength and tone benefits. It partners with all metric threaded Kluson® bushings. Bushings sold separately. | Starting at $7.65 | Click to read more |
 | Tuner Bushings - for New Fender® Replacement bushings for Fender® headstocks. Contemporary - 10.5mm outside diameter and 6.35mm inside diameter.
These are the correct adapter bushings for contemporary Fender necks that are bored out to slightly larger modern specs. These work as reducer bushings to enable you to install a vintage Kluson tuner on a modern headstock from Fender without having to plug and redrill the pegholes. | $8.40 On Backorder | Click to read more |
 | Machine Head - Kluson, 6/line, Contemporary Diecast6-in-a-line. New Kluson® 19:1 ratio die-cast tuning machine set for contemporary guitars. These state of the art diecast tuners are designed for usage on contemporary guitars and utilize the same mounting hole common to Grover 305 series medium tuners as well as the common Gotoh tuner with the mounting screw located offset at approximately 7 O'clock or 5 O'clock depending on left or right handed application. Uses the common modern 25/64 in. (10mm) peghole with a hex head type screw-in bushing and single mounting screw. All mounting hardware is included.
| $47.95 Out of Stock | Click to read more |
 | Machine Head - Kluson, 6/line, Oval Metal Button The Kluson Contemporary Series 19:1 ratio locking tuning machine uses the more desireable rear knob locking system and is designed for usage on contemporary guitars. This design requires an individual mounting hole location offset at approximately 7 O'clock or 4 O'clock depending on left or right handed application (bass or treble side). Uses the common modern 25/64 in. (10mm) peghole with a hex head type screw-in bushing and single mounting screw. This is a 6 in line set of tuning machines for right handed instruments (non-reverse headstocks) with all mounting hardware included | Starting at $58.95 | Click to read more |
 | Tailpiece - Kluson, Steel StudsU.S. made and true to vintage specifications. Lightweight (35 grams) aluminum for added resonance. Steel studs included. The Kluson® aluminum stop bar tailpiece is true to vintage specifications. Made from light-weight aluminum to increase string definition and resonance on those instruments using darker tone woods like mahogany, while reducing weight. Comes with studs only.
| Starting at $37.95 | Click to read more |
 | Tailpiece Studs - Kluson, Stop, Brass, .781 inch, set of 2 U.S. made quality .781 in. (short) stoptail studs in standard threading. Five step plating process for extra durability. Set of 2.
This Kluson® standard stop bar tailpiece stud made from brass works with all Kluson® US threaded bushings. Inserts sold separately. | Starting at $5.95 | Click to read more |
 | Tailpiece Studs - Kluson, Stop, Steel, .781 inch, set of 2 U.S. made quality .781 in. (short) stoptail studs in standard threading. Five step plating process for extra durability
This Kluson® standard stop bar stud is made in steel for added strength and sustain and works with all Kluson® US threaded bushings. Body Inserts sold separately. | $7.65 On Backorder | Click to read more |
 | Bridge - Kluson, Harmonica, Steel Chrome with Brass Saddles KLUSON® HARMONICA BRIDGE STEEL WITH BRASS SADDLES
This bridge, popularly referred to as the harmonica bridge is a direct replication of the original using all the same quality fabrication, dimensions and best of all, milled from steel billet to give you the tone you crave. Now there is finally a proper replacement for all those vintage Gibson guitars without having to modify the original instrument! Just when you thought you weren’t going to be able to restore your original hardware, Kluson comes through!
Important Specs and Dimensions:
Bridge Dimensions = 3.5 in. L X 1 in. W X 25/64 in. at center
E to E String Spacing = 52mm
String Pitch = 10.4mm
Radius = 12 inch
Material = Milled Billet Steel w/ brass saddles
Stud thread = 8mm X 1.25 pitch
Inserts included | $149.95 | Click to read more |
480.820.5411