Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
Nut - Bone, for Acoustic, 45mm x 10mm x 4.95mm
High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom feel and appearance.
  • Measures 45mm x 10mm x 4.95mm
  • Sold individually
$4.25
Nut - Bone, for Acoustic, 52.5mm x 10mm x 4.95mm
High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom fit and appearance.
  • Measures 52.5mm x 10mm x 4.95mm
  • Sold individually
$4.25
Nut - Bone, for Fender, 44.45mm X 3.3mm X 6.35, Flat
Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm at highest point with flat bottom.
$3.95
Nut - Bone, for Fender, 44.45mm X 3.3mm X 6.35, Radiused
Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm with radiused bottom.
$4.25
Nut - Bone, for Gibson, 43mm X 5.9mm X 8mm, Flat
Bone nut for Gibson®, 43mm x 5.9mm x 8mm at highest point with flat bottom.
$5.55
Nut - Bone, Oversized, 56mm x 11mm x 6.35mm
High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom fit and appearance.
  • Measures 56 mm x 11 mm x 6.35 mm
  • Sold individually
$4.25
Nut - Brass, for Fender, blank un-slotted
This brass nut blank will work for most Fender® and similar style guitars and basses. It is NOT slotted and does require final shaping and fitting to exact size.
  • Thickness = 9/64 inches (3.47mm)
  • Flat Bottom Length = 1 11/16 inches (43 mm)
  • Height at ends = 13/64 inches (5.25mm)
  • Height at middle = 15/64 inches (6mm)
$6.50
Nut - Fender®, LSR Roller for stabilizing tuning
LSR roller nut reduces friction that can cause tuning instability. Comes with instructions, mounting hardware and Wilkinson® adapter for older Strat® Plus models. Used on American Deluxe HSS guitars. Kit Includes: LSR Nut, Shims, Mounting Screws and Bezel Adapter (for Retrofitting to Wilkinson® Nut Equipped Guitars) Will Accommodate String Gauges from .008 to .056. Some modification may be required.
$37.95
Nut - Fender®, Pre-slotted, Bone, for Tele and Strat
Original Fender pre-slotted bone nut for Teles and Strats.
$15.85
Nut - Fender®, Pre-slotted, Melamine, for Tele and Strat
Original Fender pre-slotted melamine nut for Teles and Strats.
$8.45
Nut - Fender®, replacement for American standard P-Bass
Fender® replacement string nut for American Standard Precision Bass
$7.25
Nut - Gold Tone, Zero Glide Blank (Unslotted)
The Zero Glide® Replacement Nut System borrows the “zero fret” concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only take a few minutes to install with absolutely no permanent alteration to your instrument. Zero fret wire included (multiple sizes). Comparison Standard Nut Zero Glide Open String Tone Absorbs energy. Fret reflects energy, making the open strings more vibrant. Tuning Friction causes string binding. 93% less surface area. More accurate tuning. String Bend/Whammy Bar Whammy bars and string bends cause the strings to bind in the nut and not return to pitch Reduces string binding and "returns to zero" after every tug of the whammy bar or bend Intonation Large pitch deviation in early frets. (See intonation graph below) Minimal pitch deviation in early frets.
$24.00
Nut - Gold Tone, Zero Guide Slotted
The Zero Glide® Replacement Nut System borrows the “zero fret” concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. Zero fret wire included (multiple sizes). Comparison Standard Nut Zero Glide Open String Tone Absorbs energy. Fret reflects energy, making the open strings more vibrant. Tuning Friction causes string binding. 93% less surface area. More accurate tuning. String Bend/Whammy Bar Whammy bars and string bends cause the strings to bind in the nut and not return to pitch Reduces string binding and "returns to zero" after every tug of the whammy bar or bend Durability Slots wear down over time. Minimal wear.
Starting at $24.00
Nut - Graphite, for Fender, blank unslotted
This graphite nut blank will work for most Fender® and similar style guitars and basses. It is NOT slotted and does require final shaping and fitting to exact size. It has a radiused bottom.
  • Length = 2 1/64 inches (51.25mm)
  • Height = 11/64 inches (4.55mm)
  • Thickness = 1/8 inch (3.1mm)
$4.55
Nut - Graphite, for Fender, with Slots
Graphite nut for Fender® This graphite nut will work for most Fender® and similar style guitars. It is slotted, but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
  • Length = 1 41/64 inches (41.52mm)
  • Height #1 (fretboard side) = 13/64 inches (5.06mm)
  • Height #2 (headstock side) = 13/64 inches (5mm)
  • Thickness at bottom = 9/64 inches (3.46mm)
  • Thickness at top = 1/8 inches (3.1mm)
$4.55
Nut - Graphite, for Gibson, slotted
This graphite nut will work for most Gibson® and similar style guitars and basses. It is slotted but does require final shaping and fitting to exact size. PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
  • Length = 1 23/32 inches (43.75mm)
  • Height #1 (fretboard side) = 5/16 inches (7.81mm)
  • Height #2 (headstock side) = 9/32 inches (7mm)
  • Thickness at bottom = 15/64 inches (6.1mm)
  • Thickness at top = 3/16 inches (4.78mm)
$4.55
Nut - Original Fender, Pre-Slotted Brass, for Strat / Tele
High-quality solid-brass string nut as used on the Yngwie Malmsteen Stratocaster®, for use with Stratocaster and Telecaster® guitars. Designed for 9.5"-radius fingerboards and pre-slotted with string location grooves to simplify spacing and positioning during final slot filing. Note that some filing and shaping modifications may be required to ensure proper fit and performance. • High-quality solid-brass string nut • For 9.5" fingerboard radius • Pre-slotted • 9.5" (241mm) top and bottom radius • 1.620” (41.15mm) wide
$14.95
Nut - Plastic construction, for Stratocaster
Stratocaster guitar nut - plastic construction
$1.95
Nut - Plastic, for Electric Guitars
Plastic electric guitar nut.
$1.95
Nut - Tusq , Pre-shaped Blank, Acoustic, Martin Style
The PQ-M100-00 is a TUSQ nut blank specially designed to be used on Martin style guitars. It has an angled bottom and needs to be slotted. Dimensions:
  • Length - 1.89 in. (48.01mm)
  • Width - 0.226 in. (5.74mm)
  • Height - 0.42 in. (10.67mm)
$11.60
Nut - Tusq , Pre-slotted, 6 String Acoustic
The PQ-1720-00 is the perfect option to upgrade the nut on your six string guitar. It is pre-slotted for a quick and simple install. It is a very common nut used in the Godin family of guitars.
Dimensions:
  • Length - 1.695 in. (43.05mm)
  • Width - 0.204 in. (5.18mm)
  • Height - 0.403 in. (10.24mm)
  • E to E - 1.415 in. (35.93mm)
$11.60
Nut - Tusq , Pre-slotted, Acoustic / Electric, 1 11/16”
The PQ-6116-00 is the perfect option to replace and upgrade the nut on your acoustic or electric guitar. It is pre-slotted to make for a quick and easy install. Dimensions:
  • Length - 1.707 in. (43.36mm)
  • Width - 0.192 in. (4.88mm)
  • Height - 0.331 in. (8.41mm)
  • E to E - 1.435 in. (36.45mm)
$11.60
Nut - Tusq , Pre-slotted, Acoustic, Martin Style, 1 3/4”
The PQ-M644-00 is the perfect option to replace and upgrade the nut on your Martin style acoustic guitar. It has an angled bottom and comes pre-slotted to make for a quick and easy install. Dimensions:
  • Length - 1.745 in. (44.32mm)
  • Width - 0.224 in. (5.69mm)
  • Height - 0.361 in. (9.17mm)
  • E to E - 1.418 in. (36.02mm)
$11.60
Nut - Tusq XL, 3/16” Slab, Black, 63.5mm x 4.75mm x 11.1mm
The PT-4187-00 is a great option to replace and upgrade the nut on just about any guitar or bass. It is a 3/16" thick slab of Black TUSQ XL.
This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq.
Dimensions:
  • Length - 2.5 in. (63.5mm)
  • Width - 0.187 in. (4.75mm)
  • Height - 0.437 in. (11.1mm)
$11.60