You are here

Guitar Parts

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(2 pages)
P-GT10XBushings - Kluson, ¼" bushings, set of 6
Colors Available:
Adapter bushings to retrofit US 1/4 inch post Kluson tuners in a headstock drilled for modern die cast tuners. Nickel plating. Set of 6.
These Kluson® steel replacement - adapter bushings are intended for use in converting a modern 10mm drilled headstock to accept a vintage Kluson stamped steel tuning machines with the original US 1/4 inch string post diameter. Many repair shops use these to convert a vintage instrument back to original peg head specs.
  • Outside diameter: 9.98mm
  • Inside diameter: 1/4 inch (about 6.35mm)
$7.50
Starting at $6.60
You save: 12%
Click to read more
P-GKLU-KCD3801XMachine Head - Kluson, 3+3, Contemporary Diecast
Colors Available:

3 per side. New Kluson® 19:1 ratio die-cast tuning machine set for contemporary guitars. These state of the art diecast tuners are designed for usage on contemporary guitars and utilize the same mounting hole common to Grover 305 series medium tuners as well as the common Gotoh tuner with the mounting screw located offset at approximately 7 O'clock or 5 O'clock depending on left or right handed application. Uses the common modern 25/64 in. (10mm) peghole with a hex head type screw-in bushing and single mounting screw. All mounting hardware is included.


$40.95
Starting at $36.04
You save: 12%
Click to read more
P-GKLU-KL3801XMachine Head - Kluson, 3+3, Locking, Large Metal Button
Colors Available:

3 per side. The Kluson Contemporary Series 19:1 ratio locking tuning machine uses the more desirable rear knob locking system and is designed for usage on contemporary guitars. This design requires an individual mounting hole location offset at approximately 7 O'clock or 4 O'clock depending on left or right handed application (bass or treble side). Uses the common modern 25/64 in. (10mm) peghole with a hex head type screw-in bushing and single mounting screw. This is a 3 + 3 set of tuning machines with all mounting hardware included.


$58.95
Starting at $51.88
You save: 12%
Click to read more
P-GKLU-KCD3805XLMachine Head - Kluson, 6/line, Contemporary Diecast
Colors Available:

6-in-a-line. New Kluson® 19:1 ratio die-cast tuning machine set for contemporary guitars. These state of the art diecast tuners are designed for usage on contemporary guitars and utilize the same mounting hole common to Grover 305 series medium tuners as well as the common Gotoh tuner with the mounting screw located offset at approximately 7 O'clock or 5 O'clock depending on left or right handed application. Uses the common modern 25/64 in. (10mm) peghole with a hex head type screw-in bushing and single mounting screw. All mounting hardware is included.


$47.95
$42.20
You save: 12%
Out of Stock
Click to read more
P-GKLU-KL3805XLMachine Head - Kluson, 6/line, Oval Metal Button
Colors Available:
The Kluson Contemporary Series 19:1 ratio locking tuning machine uses the more desireable rear knob locking system and is designed for usage on contemporary guitars. This design requires an individual mounting hole location offset at approximately 7 O'clock or 4 O'clock depending on left or right handed application (bass or treble side). Uses the common modern 25/64 in. (10mm) peghole with a hex head type screw-in bushing and single mounting screw. This is a 6 in line set of tuning machines for right handed instruments (non-reverse headstocks) with all mounting hardware included
$58.95
Starting at $51.88
You save: 12%
Click to read more
P-GKLU-SD90SLN-MTuner - Kluson, Nickel, Metal Keystone Buttons, 3/side
Complete set with both bass and treble side individual tuning machines. Includes bushings and mounting screws. Historically correct replacement for many ‘50s and ‘60s Gibson®, Martin® and Epiphone® guitars.
$53.95
$47.48
You save: 12%
Click to read more
P-GKLU-SD9005MNTuner - Kluson, Oval, 3 per side, Nickel

Kluson Oval Metal Button Tuners, 3 Per Side Complete set with both bass and treble side individual tuning machines. Includes bushings and mounting screws. Historically correct replacement for many ‘50s and ‘60s Gibson®, Martin®, Kay®, Epiphone®, Guild®, Rickenbacker® and ‘60s through ‘80s Mosrite® guitars. Used on Gibson® ES-330, Epiphone Casino


$45.00
$39.60
You save: 12%
Click to read more
P-GKLU-WD90NPPTuner - Kluson, plastic, 3 on plate, nickel

Kluson Plastic Button Tuners, 3 On Plate, Nickel (Type WD90NPP) Complete set includes both bass and treble side tuning machines on a plate. Includes bushings and mounting screws. Historically correct replacement for many Gibson®, Kay® and Epiphone® guitars.. Used on Les Paul Jr / SG Junior


$45.00
$39.60
You save: 12%
Click to read more
P-GKLUSD9005MNPTuner - Kluson, plastic, 3 per side, nickel/white

Kluson Plastic Button Tuners, 3 Per Side, Nickel/White (Type SD9005MNP) Complete set with both bass and treble side individual tuning machines. Includes bushings and mounting screws. Historically correct replacement for many ‘50s and ‘60s Gibson®, Martin®, Kay®, Epiphone®, Guild®, Rickenbacker® and ‘60s through ‘80s Mosrite® guitars. Used on Gibson® ES-330, Epiphone Casino


$32.00
$28.16
You save: 12%
Click to read more
P-GKED-3801XTuner - Kluson, Revolution G Mount, Keystone Button, 3/side
Colors Available:

The Kluson® Revolution G-Mount 19:1 high ratio tuning machines offer the traditional Kluson® footprint and a newly designed sealed die-cast, one-piece housing. High gear ratio guarantees silky smooth operation, fine tuning stability with no backlash. These state of the art tuning machines are designed to directly retrofit die-cast tuning machines that have a hex head (collared) bushing and a traditional Kluson® two-screw mounting pattern. Uses the common modern 25/64 in. (10mm) peghole. The G-Mount pattern makes these a great drop-in replacement for the modern “Gibson® Deluxe” collared tuning machines found on many models. No modification or unused holes!



  • All mounting hardware is included.
  • Precise 19:1 gear ratio for smooth operation
  • Sealed diecast,one piece housing
  • Traditional Kluson® two-screw mounting pattern with collared bushing.
  • Metal keystone button
  • Available in Nickel or Gold

$43.00
Starting at $37.84
You save: 12%
Click to read more

Pages

(2 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Guitar Parts