Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
Knob - Chicken Head, mini, high-quality, brass insert, Set Screw
Colors Available:
New!:
High quality miniature chicken head knob with set screw for smaller applications. 0.90" long nose to tail. Mini Davies 2300 clone.
$0.79
Knob - Chicken Head, Raised, set screw
Colors Available:
New!:
Raised plastic chickenhead knob with brass insert and set screw. 1.20" in length. Davies 2300 clone.
Starting at $0.90
Knob - Small, Indicator Line, set screw
Colors Available:
New!:
The P-K380 is a high quality Davies 1510 clone. This classic design can be found on countless pedals, synths, amps and other equipment. The set screw uses a metal insert for additional stability and durability. This knob has an infilled painted indicator and fits 1/4" (6.35mm) pot shafts. The P-K380 pairs nicely with the color matched P-K801-BRASS-X knobs.
Starting at $0.70
Knob - Black, White Line, Silver Top, Set Screw, Boss Style
Black knob with white line, silver top, set screw and brass insert. Fits ¼" shaft with set screw. These Boss style knobs come in a variety of sizes. See P-K383X for an unskirted version.
Starting at $1.35
Switch Tip - Switchcraft, for Gibson® Pickup Selectors
Colors Available:
Switchcraft Switch Tip for Gibson Pickup Selectors. Threading: 8-32. Replacement for Gibson: PRTK-010
$2.39
Switch - Switchcraft, Toggle, 3-way, for Les Paul
One of the most rugged and durable switches available for your Gibson Les Paul or similar two pickup guitars.
$17.95
Knob - Mini Indicator, Set Screw, 15mm x 11mm
Colors Available:
New!:
Mini fluted knob with infilled indicator line. Pairs well with the larger P-K850X. Fits ¼” (6.35mm) pot shafts.
  • Height: 11mm
  • Diameter: 15mm
  • Fits 1/4" shaft with set screw
Starting at $0.75
Wire - 4 Conductor, Shielded, 28 AWG
Sold by the foot
Shielded 4-conductor wire used in wiring pickups, controls etc. Shielded 4-conductor wire is commonly used in humbucking pickups to allow more wiring flexibility over the 2-conductor setup. Building a pickup using 4-conductor wire will allow you to wire up coil cut, phase switching, and series/parallel configurations. Additionally, 2 conductor pickups can be converted to 4-conductor using this wire.
  • Sold per foot
  • 28 AWG
  • Foil shield
  • 12”/3.2mm outer diameter
  • Sold individually
$0.99
Knob - Set Screw, Marshall Style, black
Cap Colors Available:
.77" diameter x .62" tall.
$1.59
Polepiece - Fillister, 5-40 x 0.75”, 1018 Steel, USA
Colors Available:
Original, made in USA, fillister head screws for use as polepieces in pickups. These premium polepieces have a 5-40 threading with a 0.75” length.
Starting at $0.50
Knob - Large, Indicator Line, Set Screw
Colors Available:
New!:
Large, knob with line indicator and set screw similar in style to the Davies 1500 and 1510 knobs. Pairs well with P-K380X. Fits ¼” (6.35mm) pot shafts.
  • Knob Height = 0.60"
  • Pointer Diameter = 1.06"
  • Fits 1/4" shaft with set screw
  • Oversized Davies 1510 Clone
$0.85
Knob - Pointer, Large, Knurled, vintage index line
Colors Available:
New!:
This vintage knob design has been used on numerous boutique pedals. These classy knurled pointer knobs are made from a solid mold, feature a slotted set screw, and fit ¼" solid shaft potentiometers. Davies 1470 clone.
Starting at $0.95
Knob - Chicken Head, Push-On, for knurled shaft
Colors Available:
High quality black plastic chickenhead knob. 1-1/4" in length. Push-on for split knurled shaft.
Starting at $1.35
Knob - Chicken Head, set screw, brass inset
Colors Available:
  • Fits ¼" Solid Shafts (Set Screw)
  • Chicken head knobs are used everywhere on countless amps, stomp-boxes, etc.
  • Brass Set Screw and Insert
  • High Quality Plastic
Starting at $1.25
Wire - 20 AWG Solid Core, Lacquered Cloth Cover, 600V
Colors Available:
#20 solid copper wire with modern insulation and lacquered cotton braid finish. 105°C temperature rating, 600V. For a stranded version, see: S-W7XL
Starting at $9.00
Knob - Top Hat, Gibson Style see-through
Colors Available:
Gibson style top hat knob. Multiple color options available. Fits fine knurled pot shafts.
$1.95
Wire - 20 AWG Stranded Core, Lacquered Cloth Cover, 600V
Colors Available:
#20 stranded copper wire with modern insulation and lacquered cotton braid finish. Provides safety and authentic vintage look. 105°C temperature rating, 600V. For a solid core version, see: S-W8XL
Starting at $9.00
Jack Plate - for Telecaster guitars
Colors Available:
Avoid loose output jacks with this jack mount for Telecaster guitars. Includes two angled screws that ensure that the jack will be held tightly in place. Multiple color options available.
  • Capable of being screwed directly onto switchcraft jacks
$5.00
Knob - Push-On, Marshall Style, black
Cap Colors Available:
.77" diameter x .62" tall. Fits both fine and coarse knurled pot shafts.
$1.48
Magnet - Rod, Alnico 5, .187", Vintage Chamfer
Alnico 5 rod magnets with a .187” diameter. These magnets feature a vintage style chamfer and are not magnetized. Great for vintage Strat style pickups and many others.
Starting at $0.50
End Buttons / Pins - Grover, for quick-release Strap locks
Package of 2
Colors Available:
Replacement End Pins for Grover Quick-Release strap locks. These extra end pins can be mounted on all guitars making it possible to use just one strap! Smooth, polished parts will not damage or mark up
$3.75
Screw - 4-40, Phillips, Pan Head, Machine, Zinc
Package of 5
Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Starting at $0.35
Slug - 1215 Steel, 0.187" Diameter, for Humbucker Pickups
Colors Available:
Original, made in USA, steel slugs for making humbucker pickups. These premium slugs are made of 1215 steel. These parts are made using the same materials and processes as the most sought after vintage parts.
$0.40
Screw - 8-32, Phillips, Pan Head, Machine, Zinc
Package of 5
Phillips panhead machine screw, 8-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Starting at $0.75