Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
Neck - for Telecaster Guitar, Vintage Rosewood
Replacement Vintage Telecaster® neck with mostly vintage and a few subtle modern features like 21 medium jumbo frets, 10 in. radius, 1 5/8 in. nut width, a comfortable C shaped profile and a honey tinted gloss finish. Rosewood finger board with a heel adjust truss rod location and 8.8mm peg holes drilled for a vintage Kluson® tuning machine as nature intended. Nut not included. Fender Licensed replacement neck.
$166.50
Neck - for Telecaster Guitar, Maple, Headstock Adjust
Replacement Telecaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 inch radius maple fingerboard. The nut width is 1 11/16 inch wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson® tuning machines. A thin clear satin finish makes this the perfect replacement for your modern Telecaster®. Nut not included. Fender Licensed replacement neck.
$140.95
On Backorder
Neck - for Stratocaster Guitar, Rosewood
Replacement Stratocaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 in. radius rosewood fingerboard. The nut width is 1 11/16 in. wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson® tuning machines. A thin clear satin finish makes this the perfect replacement for your modern Stratocaster®. Nut not included. Fender Licensed replacement neck. Heel width is 2 3/16".
$135.00
On Backorder
Neck - for Telecaster Guitar, Rosewood
Replacement Telecaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 in. radius rosewood fingerboard. The nut width is 1 11/16 in. wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson® tuning machines. A thin clear satin finish makes this the perfect replacement for your modern Telecaster®. Nut not included. Fender Licensed replacement neck.
$135.00
On Backorder
Neck - for Stratocaster Guitar, Maple, Headstock Adjust
Replacement Stratocaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 in. radius maple fingerboard. The nut width is 1 11/16 in. wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson® tuning machines. A thin clear satin finish makes this the perfect replacement for your modern Stratocaster®. Nut not included. Fender Licensed replacement neck.
$135.00
On Backorder
Bridge - Hipshot, SuperTone, 2 Point Bass
Colors Available:
Hipshot 4 string Supertone 2 point bass bridge. A direct replacement for 1967 to 1973 Gibson 2 point bass bridges (e.g. Thunderbird, SG Bass, etc.) using the existing hole pattern. Features complete adjustability for precise intonation, independent string height and side-to-side string spacing. Includes: (2) 5/16-20 hex cap socket screws and (2) hex/allen keys: 1/16” and 5/64”
$126.50
Bridge - Hipshot, Supertone Bass, replacement for Gibson, chrome
If you’re one of the many Gibson® bass owners who are fed up with the stock bridge, our SuperTone Gibson® replacement bridge is the answer to your prayers. By utilizing the existing mount pattern, the SuperTone gives you a full range of intuitive adjustability and excellent tone transference without any modifications to your bass whatsoever. And with its timeless and elegant lines, the SuperTone will help you look as good as you sound. It’s the bridge your Gibson® has been waiting for.
$118.95
Bridge - Hipshot, 4-string Type A Bass
Retrofits your Fender five hole mount bridge on your 4 string bass using the two outer holes and the center hole. The type A saddles feature variable string spacing adjustment for even greater versatility and fine intonation adjustment as well. 4 String Bass Bridge. Type A Fender Mount (3 Mounting Holes). Non-string-through.
Starting at $93.50
Tuner - Hipshot, BT2 Bass Xtender, nickel
Retrofit your USA '67-'82 Fender P & J Bass for drop tuning! Also retrofits Geddy Lee, reissue '67-'82 Fender. Fits 11/16 in. headstock holes. Installation instructions and mounting hardware included.
$71.50
On Backorder
Tuner - Hipshot, HB2 for Bass, nickel
Replace your sloppy, worn out tuning machines with a set of Hipshot American Classics. The HB2 is a direct replacement for the Schaller® BMF tuner that was first found on CBS era Fender® basses manufactured between 1967 and 1982. Since then, the BMF tuner has been featured on countless boutique builds and Custom Shop models.
$27.45
Switch - Switchcraft, Pickup Selector, for Gibson® L-Type
Switchcraft Pickup Selector, Replacement for Gibson L-Type. Similar to Gibson® PSTS-010. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG. This version of the L-Type switch is used in the common two pickup wiring for a neck position, middle position with neck and bridge, and a bridge position.
$18.50
Tailpiece - Les Paul, Standard Style, Chrome
Replacement chrome tailpiece for Les Paul style guitars and others. M8 * 12.5 thread studs (anchor bushings included). Made in Korea.
$17.45
Switch - Switchcraft, Pickup Selector, for Gibson® Straight
Colors Available:
Switchcraft Pickup Selector, Replacement for Gibson Straight-Type. As found on LP style solid body guitars.
Starting at $16.49
Fret wire - Dunlop, pre-cut, medium, for early Fender®
Package of 24
Dunlop Accu-Fret® fretwire is manufactured from a durable nickel/silver alloy and delivers a warm and clear tone-the preferred brand for guitar builders and repairmen worldwide. Good on early Fenders®.
$13.95
Fret wire - Dunlop, pre-cut, large, for early Gibson
Package of 24
Dunlop®, 6130,.036" x.106", 28% nickel/silver, hard alloy, 2 5/8" long, large/jumbo size, good on early Gibson®, 24 pieces
$13.95
Pickguard Blanks - 12” x 18” sheet, 0.095” thickness
Color, Plys Available:
Blank pickguard material sheets for cutting custom pickguards, truss rod covers, and back plates. These sheets come in a variety of colors as well as single ply and three ply options. All colors feature a gloss surface.
$12.50
Pickguard - for Standard Strat®, 11 Hole, 3-Ply
Colors Available:
Replacement pickguard for Fender® Standard Stratocaster models. These pickguards have eleven mounting holes and are cut for the classic strat configuration. Fits most American and Mexican Standard Stratocasters®. Features:
  • 3-ply / 2.5mm thickness
  • 11 mounting holes
  • Shielding over electronics cavity
  • Fits 3/8" bushing pots
  • Various colors available
Starting at $11.30
Pickguard - for American Deluxe Strat®, HSS, 11 Hole, 3-Ply
Colors Available:
Replacement pickguard for Fender® American Deluxe Strat models. These pickguards have eleven mounting holes and feature cutouts for two single coil pickups and a humbucker in the bridge position. The humbucker cutout has rounded corners for a flush fit with uncovered pickups. Fits most American Deluxe Stratocasters® that are routed for a humbucker bridge pickup.
Features:
  • 3-ply / 2.5mm thickness
  • 11 mounting holes
  • Shielding over electronics cavity
  • Fits 3/8" bushing pots
  • Various colors available
$11.30
Jack Plate - Electrosocket, for Tele, chrome plated brass
This modern cupstyle Tele® jackplate is milled from brass and has a shiny plated finish. Mounts with (2) screws that are included. No more having to deal with that sharp piece of steel used to secure the old original cups. Super easy to install! The cup is even threaded so no need for the lockwasher and nut from the jack. Just simply screw the jack into the cup, solder the wires and install into your instrument!
$10.75
Pickguard - for Tele, 5 Hole, Single Ply
Replacement pickguard for Telecaster guitars. These pickguards feature five mounting holes. Cut from a thicker single ply sheet, these pickguards offer a vintage style with added rigidity.
$10.25
On Backorder
Pickguard - For '62 Strat®, 11 Hole, 3-Ply
Colors Available:
Replacement pickguard for Fender® '62 Strat® models. These pickguards have eleven mounting holes with one of the holes centered between the middle and neck pickups for compatibility with most American, Japanese, and Mexican '62 Stratocasters®.
Starting at $10.25
Pickguard - For '57 Strat®, 8 Hole, 3-Ply
Replacement pickguard for Fender® '57 Strat® models. These three-ply pickguards have eight mounting holes. Fits most American, Japanese, and Mexican '57 Stratocasters®.
Features:
  • 3-ply / 2.5mm thickness
  • 8 mounting holes
  • Shielding over electronics cavity
  • Fits 3/8" bushing pots
$10.25
Pickguard - For Standard Strat®, HSS, 11 Hole, 3-Ply
These pickguards have eleven mounting holes and feature cutouts for two single coil pickups and a humbucker in the bridge position. Fits most American and Mexican Standard Stratocasters® that are routed for a humbucker bridge pickup.
$10.25
On Backorder
Pickguard - P-Bass, 3-Ply, Black / White / Black
Three-ply black/white/black P-Bass style pickguard with 13 mounting holes. This pickguard is routed for a standard P-Bass style pickup and wiring configuration.
$10.25