Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
Plate - Fender®, Vintage Tele Bridge, Chrome
Chrome-plated steel bridge plate for use on American Vintage, Classic and Road Worn® series Telecaster® models.
  • String-through-body three-saddle design
  • Mounting hardware and bridge saddles not included
$13.45
Bridge - Les Paul, Standard Style, Chrome
Pre-slotted chrome replacement bridge for Gibson Les Paul and others. Nashville style posts: M4 x 0.70, 25 mm height. Made in Korea.
$15.05
Bridge - ABR-1, Wired, Raw Brass Saddles, USA
Colors Available:
Made in U.S. vintage-spec ABR-1 bridge made to the same specifications as the original 1950s version. Wired with raw brass saddles. Mounting hardware sold separately. For a full set with all hardware included, please see P-GKLU-KLP128X. The bridge features the vintage-style retaining wire that secures the raw brass saddles and intonation screws onto the bridge.
  • Post spacing: 2.93 inches (74.5mm)
  • Radius: 12 inches (30.48cm)
  • String Spacing: 10.4 mm
Starting at $15.95
Bridge - Grover, Adjustable, Rosewood, 6", Metal Saddle
Two piece rosewood bridge with metal saddle. Adjustable style. 6” wide. For 6 or 12-string guitars with a tailpiece.
$16.95
Bridge - Les Paul, Vintage ABR, Chrome
Vintage style ABR bridge. Wired. Hardware included The saddles on this ABR bridge are held in place with a thin wire securing the intonation screws and saddles into the frame. Adjustable in height with thumbwheels and threaded rod that uses no body inserts just as the vintage originals were designed.
  • Thumbwheels and threaded rod included
  • Made In Korea
$17.45
Bridge - Gotoh, Tune-O-Matic, Standard Post
Colors Available:
Bridge A modern version of the Tune-o-matic style bridge for the solidbody guitar. Pre-notched saddles with an individual saddle intonation screw retained by mini hex nuts for each one. Standard mounting post style and features hard zinc saddles. Hardware included.
Starting at $17.75
Bridge - Gotoh, ABR-1 Style, Tune-O-Matic, Zinc Saddles
Colors Available:
Bridge A modern version of the Tune-o-matic style bridge for the solidbody guitar. Pre-notched saddles with an individual saddle intonation screw retained by mini hex nuts for each one. Standard mounting post style and features hard zinc saddles. Hardware included.
Starting at $18.97
Bridge - Gotoh, Vintage Style, for Bass Guitar, 4-String
Colors Available:
Direct replacement for most Fender P-Bass and Jazz Bass guitars. Superior high quality and precision made. This is for those who demand only the best for their Bass without breaking the bank. Mounting screws included.
Starting at $21.75
Bridge - Fender®, Standard Tele Bridge Assembly, Chrome
Genuine Fender replacement chrome bridge assembly for use with most Standard series Telecaster models manufactured from 2004-present (does not retrofit to a three-screw mounting design without modification). Bridge pickup and mounting hardware not included.
  • Chrome bridge assembly
  • Six adjustable block saddles
  • Four-screw mounting design
  • Mounting hardware not included
  • For Standard Series Telecaster models (2004-present)
$21.95
Bridge - Gotoh, Tune-O-Matic, Studs / Bushings Post
Colors Available:
A modern version of the Tune-o-matic style bridge for the solidbody guitar. Pre-notched saddles with an individual saddle intonation screw retained by mini hex nuts for each one. Threaded thumbwheel style studs and bushings and features hard zinc saddles. Hardware included.
Starting at $22.50
Bridge - Nashville Tune-O-Matic, Zinc, USA
Colors Available:
Made in U.S. modern-spec tune-o-matic bridge with no retaining wire. This bridge is fully plated and comes with pre-slotted saddles. Mounting hardware sold separately. For a full set with all hardware included, please see P-GKLU-KLP120XC. This Nashville bridge is a great upgrade that features wider intonation adjustments and a larger mass for better tone and sustain.
  • Post spacing: 2.93 inches (74.5mm)
  • Radius: 12 inches (30.48cm)
  • String Spacing: 10.4 mm
  • For use with 4.95mm stud posts
Starting at $22.50
Bridge - ABR-1, Nonwired, Nylon Saddles, USA, nickel
Made in U.S. vintage spec ABR-1 bridge with no retaining wire and nylon saddles. Hardware sold separately. See P-GKLU-KLP1273N for a complete set. The bridge uses string tension along with the set screws to secure the nylon saddles onto the bridge.
  • Post spacing: 2.93 inches (74.5mm)
  • Radius: 12 inches (30.48cm)
  • String Spacing: 10.4 mm
$22.50
Bridge - Wraparound, Vintage Spec, Aluminum, USA
Colors Available:
U.S. made and true to vintage 1950s specifications. This lightweight (35 grams) wraparound bridge is made of aluminum to match the original 1950s version. High quality plating is used on all options. Each side is adjustable using the included hex set screws to dial in the intonation. Mounting studs sold separately. For a full set with all hardware included, please see P-GKLU-KLP1127N.
  • 3.22 in. (82mm) stud spacing
Starting at $22.95
Bridge Set - ABR-1, Wired, Raw Brass Saddles
Colors Available:
Made in U.S. vintage spec ABR-1 bridge made to the same specifications as the original 1950s version. Wired. Hardware included.
The bridge features the vintage-style retaining wire that secures the brass saddles and intonation screws onto the bridge. The spacing and mounting hardware also match the original spec of this bridge with threaded posts that mount directly to the body and thumbwheels for height adjustments.
Starting at $23.95
Bridge Set - ABR-1, Nonwired Nylon Saddles, Nickel
Made in U.S. Vintage spec ABR-1 bridge. Non-wired. Hardware included.
ABR-1 bridge with nylon saddles. True to specs like the original with no retaining wire. The saddles are held in place with a combination of string tension and the intonation screw end fitting into the frame. Adjustable in height with thumbwheels and threaded rod that uses no body inserts just like the originals!
$24.95
Bridge - Original Fender, Classic, 6-Saddle Hardtail
Genuine Fender chrome hard-tail bridge assembly for use on Classic and Pawn Shop series instruments. Includes six stamped saddles, intonation screws and springs, and saddle-height adjustment screws.
  • String-through-body design
  • Mounting hardware not included
  • 2-7/32" String Spacing
$24.95
Bridge - Gotoh, Relic GE104B, Aged Nickel
The Gotoh Relic GE104B bridge is a convincingly aged part that is perfect for a vintage or relic'd guitar. Parts from the Gotoh Relic series are uniquely worn for an aged look that offers the functionality of a new part. The various techniques used on these parts provide a relic'd look that appears genuine and not overdone. This bridge features zinc saddles, a 52mm string spacing, a 400mm radius, and 74mm stud spacing. M4 threaded mounting posts and thumb screws are included.
$27.55
Bridge - ABR-1, Nonwired, Plated Brass Saddles, USA
Colors Available:
Made in U.S. vintage spec ABR-1 bridge with no retaining wire and plated brass saddles. Hardware sold separately. See P-GKLU-KLP127X for a complete set. The bridge uses string tension along with the set screws to secure the brass saddles onto the bridge.
  • Post spacing: 2.93 inches (74.5mm)
  • Radius: 12 inches (30.48cm)
  • String Spacing: 10.4 mm
Starting at $29.95
Bridge - Original Fender®, Vintage Style, Standard Strat
Vintage-style chrome bridge assembly for use on most Standard, Deluxe, Roadhouse™, Lone Star™, and Blacktop Stratocaster models manufactured from 2006-present. Includes six bent "Fender"-stamped saddles, intonation screws and springs, and saddle-height adjustment screws. Mounting hardware, tremolo claw, tremolo springs and tremolo arm not included.
  • 2-1/16" mounting spacing*
  • Standard 10/32 tremolo arm threading
  • For a variety of Stratocaster models (2006-present)

*Note that 2-1/16" bridge mounting spacing means that bridge-mounting screws will not fit vintage or vintage reissue instrument unless modified to do so.
$29.95
Bridge - ABR-1, Wired, Plated Brass Saddles, USA
Colors Available:
New!:
Made in U.S. vintage spec ABR-1 bridge made to the same specifications as the original 1950s version. Wired with plated brass saddles. Mounting hardware sold separately. The bridge features the vintage-style retaining wire that secures the plated brass saddles and intonation screws onto the bridge.
  • Post spacing: 2.93 inches (74.5mm)
  • Radius: 12 inches (30.48cm)
  • String Spacing: 10.4 mm
Starting at $29.95
Bridge Set - Nashville Tune-O-Matic, Zinc
Colors Available:
Made in U.S. Modern spec tune-o-matic bridge. No retaining wire. Plated, preslotted saddles. Hardware included This is an awesome OEM bridge for builders or the DIY repairman offering a longer adjustment area and more mass than the original ABR-1 bridge. It matches Gibson specifications and is a drop-in, non-modification required replacement part.
  • Thread = M5 - 0.8 Metric (as used by Gibson on Nashville Models)
  • Post to Post Spacing = 2.93 in. (74.5mm)
  • Saddle Notch = Center Notched Saddles
  • Saddle Material = Zmac
  • Bridge Material = Zmac
  • Post/Thumbwheel Material = Brass
  • Radius = 12 inch
  • Post Top Diameter = .195 Inches / 4.95mm
  • Bridge Center To Center Spacing = 2.93 inches
  • Saddle Spacing = 10.4 mm
Starting at $29.95
Bridge - ABR-1, Wired, Brass Saddles
Colors Available:
Made in U.S. Vintage spec ABR-1 bridge. Wired. Hardware included. ABR-1 bridge with the retaining wire and saddles plated to match the frame. True to original mounting specs. The saddles are held in place with a thin wire securing the intonation screws and saddles into the frame. Adjustable in height with thumbwheels and threaded rod that uses no body inserts just like the originals!
Starting at $33.95
Bridge Set - ABR-1, Nonwired, Brass Saddles
Colors Available:
Made in U.S. vintage spec ABR-1 bridge with no retaining wire. Bridge posts and thumb screws included.
The bridge uses string tension along with the set screws to secure the brass saddles onto the bridge. The spacing and mounting hardware also match the original spec of this bridge with threaded posts that mount directly to the body and thumbwheels for height adjustments.
Starting at $33.95
Bridge - Bigsby, Les Paul bridge assembly
Genuine Bigsby® Les Paul bridge assembly for use with Bigsby vibrato units.
$34.95
On Backorder