Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
Pickguard - For '62 Strat®, 11 Hole, 3-Ply
Colors Available:
New!:
Replacement pickguard for Fender® '62 Strat® models. These pickguards have eleven mounting holes with one of the holes centered between the middle and neck pickups for compatibility with most American, Japanese, and Mexican '62 Stratocasters®.
Starting at $10.25
Pickup - Gotoh, HB-Classic, Humbucker, Made In Japan
The HB-Classic is a vintage style humbucker pickup. It uses a made in USA Alnico 4 bar magnet which offers a uniquely balanced tone for an alnico magnet. This pickup is wax potted for sonic stability and uses a shielded 4 conductor wire for various wiring options. The HB-Classic comes in various open and covered options to match the look of any guitar. Mounting screws and springs are included. Made in Japan.
Starting at $40.95
Bridge - ABR-1, Wired, Plated Brass Saddles, USA
Colors Available:
New!:
Made in U.S. vintage spec ABR-1 bridge made to the same specifications as the original 1950s version. Wired with plated brass saddles. Mounting hardware sold separately. The bridge features the vintage-style retaining wire that secures the plated brass saddles and intonation screws onto the bridge.
  • Post spacing: 2.93 inches (74.5mm)
  • Radius: 12 inches (30.48cm)
  • String Spacing: 10.4 mm
Starting at $29.95
Pickguard - for Standard Strat®, 11 Hole, 3-Ply
Colors Available:
New!:
Replacement pickguard for Fender® Standard Stratocaster models. These pickguards have eleven mounting holes and are cut for the classic strat configuration. Fits most American and Mexican Standard Stratocasters®. Features:
  • 3-ply / 2.5mm thickness
  • 11 mounting holes
  • Shielding over electronics cavity
  • Fits 3/8" bushing pots
  • Various colors available
Starting at $11.30
Jackplate - For Les Paul, Plated Brass, USA
Colors Available:
U.S. made plated brass jack plates for Les Paul and other compatible guitars. These plates feature high quality finishes and fit ⅜” bushing jacks like Switchcraft W-SC-11.
$5.95
Bridge - ABR-1, Nonwired, Plated Brass Saddles, USA
Colors Available:
New!:
Made in U.S. vintage spec ABR-1 bridge with no retaining wire and plated brass saddles. Hardware sold separately. See P-GKLU-KLP127X for a complete set. The bridge uses string tension along with the set screws to secure the brass saddles onto the bridge.
  • Post spacing: 2.93 inches (74.5mm)
  • Radius: 12 inches (30.48cm)
  • String Spacing: 10.4 mm
Starting at $29.95
Bridge - ABR-1, Wired, Raw Brass Saddles, USA
Colors Available:
New!:
Made in U.S. vintage-spec ABR-1 bridge made to the same specifications as the original 1950s version. Wired with raw brass saddles. Mounting hardware sold separately. For a full set with all hardware included, please see P-GKLU-KLP128X. The bridge features the vintage-style retaining wire that secures the raw brass saddles and intonation screws onto the bridge.
  • Post spacing: 2.93 inches (74.5mm)
  • Radius: 12 inches (30.48cm)
  • String Spacing: 10.4 mm
Starting at $15.95
Retaining Wire - For Wired ABR-1, USA
U.S. made replacement retaining wire for wired ABR-1 bridges. Made of high quality spring steel. Fits our U.S. made bridges as well as Gibson spec bridges.
$1.75
Tuners - Grover, Mini Rotomatic Roto-Grip locking, 6 in line
Package of 6
Colors Available:
A smaller version of the regular size ROTO-GRIP® lockers for the in line and smaller headstocks or for those who prefer a lighter feel.
Starting at $79.95
Keeper Bar - 10 Hole, 49.2mm, Raw Steel, USA
Original, made in USA, 10-hole keeper bar for 49.2mm spacing. This P.A.F. correct keeper bar is great for humbucker and P-90 pickups. Made of raw steel.
$3.95
On Backorder
Tuners - Gotoh, Compact 707 for Bass, chrome, 2+3
Package of 5
Precision 20:1 gear ratio enclosed Bass Guitar tuners. With a 7/16"-diameter string posts and threaded hex bushings. They require a 9/16"-diameter peghole for installation. Featuring sealed lubricated, cast housings and metal knobs. Mounting screws are included. Mounting hardware included. For 5-string bass. 2 Left, 3 Right.
$42.90
On Backorder
Jack Plate - replacement for Stratocaster
Colors Available:
Replacement jack plate for Stratocasters
Starting at $4.55
Bridge - Wraparound, Vintage Spec, Aluminum, USA
Colors Available:
U.S. made and true to vintage 1950s specifications. This lightweight (35 grams) wraparound bridge is made of aluminum to match the original 1950s version. High quality plating is used on all options. Each side is adjustable using the included hex set screws to dial in the intonation. Mounting studs sold separately. For a full set with all hardware included, please see P-GKLU-KLP1127N.
  • 3.22 in. (82mm) stud spacing
Starting at $22.95
Control Plate - Jaguar Style, Preset, Chrome
Jaguar style preset control plate in chrome. Perfect replacement for most Jaguar style guitars. 4.57” x 1.79” plate mounting center distance (0.14” diameter, recessed).
$6.95
Piggyback Hardware - Fender, Thumb Screws
Package of 2
Thumb screws for piggyback amplifier, used for locking amp heads to cabs. Original Fender.
$11.95
Wire - Push Back Cloth for Single Coil Pickup, Black
Sold by the foot
Black vintage style push back wire for building or repairing single coil pickups. Push back style eliminates the need for stripping.
  • Outer diameter: 0.07"
  • Sold by the foot
$1.50
Pickup - Kent Armstrong, Classic Single, Vintage Strat
This is an ultra sweet sounding, low output-pickup. The vintage single coil specifications offer a tight, balanced low end response and sweet chimey highs. If you are looking for a true vintage tone that ISN'T modified to sound like a 60 year old pickup, this is an excellent upgrade. Great for blues and classic old school funk applications. Staggered Alnico polepieces. Available reverse wound/reverse polarity. White Cover
  • D.C. resistance = 6.5K
  • Magnet Type = Alnico 5
  • Magnet dimensions: 5mm X 17mm polepieces
$37.45
Cover - Fender®, '51 P-Bass / Tele Bass, Chrome
Original Fender® pickup cover for '51 P Bass/Tele Bass, chrome.
$17.45
Cover - Humbucker, 53mm, Nickel Silver, USA
Colors Available:
Original, made in USA, covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have a 53mm spacing.
Starting at $6.95
Bridge - Gotoh, Tune-O-Matic, Standard Post
Colors Available:
Bridge A modern version of the Tune-o-matic style bridge for the solidbody guitar. Pre-notched saddles with an individual saddle intonation screw retained by mini hex nuts for each one. Standard mounting post style and features hard zinc saddles. Hardware included.
Starting at $17.75
Fret wire - Dunlop, pre-cut, medium, for early Fender®
Package of 24
Dunlop Accu-Fret® fretwire is manufactured from a durable nickel/silver alloy and delivers a warm and clear tone-the preferred brand for guitar builders and repairmen worldwide. Good on early Fenders®.
$13.95
Control Plate - Gotoh, Relic, for Jazz Bass, 3-Hole, Aged Chrome
The Gotoh Relic Jazz Bass style control plate is a convincingly aged part that is perfect for a vintage or relic'd bass. Parts from the Gotoh Relic series are uniquely worn for an aged look that offers the functionality of a new part. This plate fits ⅜” bushing potentiometers.
$27.27
Bridge - Hipshot, SuperTone, 2 Point Bass
Colors Available:
Hipshot 4 string Supertone 2 point bass bridge. A direct replacement for 1967 to 1973 Gibson 2 point bass bridges (e.g. Thunderbird, SG Bass, etc.) using the existing hole pattern. Features complete adjustability for precise intonation, independent string height and side-to-side string spacing. Includes: (2) 5/16-20 hex cap socket screws and (2) hex/allen keys: 1/16” and 5/64”
$126.50
Neck - for Stratocaster Guitar, Rosewood
Replacement Stratocaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 in. radius rosewood fingerboard. The nut width is 1 11/16 in. wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson® tuning machines. A thin clear satin finish makes this the perfect replacement for your modern Stratocaster®. Nut not included. Fender Licensed replacement neck. Heel width is 2 3/16".
$135.00
On Backorder