Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
P-H708 Control Plate - Jaguar Style, Selector Switch, Chrome
Jaguar style selector switch plate in chrome. Perfect replacement for most Jaguar style guitars. This version features the stock three switch configuration originally used for selecting pickups and engaging the mid-tone cut.
$5.95
P-H702X Control Plate - Telecaster Style, for ⅜” Bushing Pots
Colors Available:
New!:
Tele style control plate. 5.9” plate mounting center distance (0.123” diameter, recessed).
  • Two potentiometer mounting holes for 3/8” bushing diameters
  • One standard selector switch mounting slot (1.63” mounting center distance, 0.15” diameter, recessed)
  • Made in Korea
Starting at $5.35
P-GTTJP-C Jack Plate - for Telecaster, Chrome
Replacement jack plate for Telecasters
$5.10
P-G103 Pickguard - P-Bass, 3-Ply, Black / White / Black
Three-ply black/white/black P-Bass style pickguard with 13 mounting holes. This pickguard is routed for a standard P-Bass style pickup and wiring configuration.
$10.25
P-NECK-S-01 Neck - for Stratocaster Guitar, Maple, Headstock Adjust
Replacement Stratocaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 in. radius maple fingerboard. The nut width is 1 11/16 in. wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson® tuning machines. A thin clear satin finish makes this the perfect replacement for your modern Stratocaster®. Nut not included. Fender Licensed replacement neck.
$135.00
On Backorder
P-G104-X Pickguard - For '62 Strat®, 11 Hole, 3-Ply
Colors Available:
Replacement pickguard for Fender® '62 Strat® models. These pickguards have eleven mounting holes with one of the holes centered between the middle and neck pickups for compatibility with most American, Japanese, and Mexican '62 Stratocasters®.
Starting at $10.25
P-NECK-T-30 Neck - for Telecaster Guitar, Maple, Headstock Adjust
Replacement Telecaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 inch radius maple fingerboard. The nut width is 1 11/16 inch wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson® tuning machines. A thin clear satin finish makes this the perfect replacement for your modern Telecaster®. Nut not included. Fender Licensed replacement neck.
$135.00
P-BH-XK-2C Tuner - Hipshot, BT2 Bass Xtender, nickel
Retrofit your USA '67-'82 Fender P & J Bass for drop tuning! Also retrofits Geddy Lee, reissue '67-'82 Fender. Fits 11/16 in. headstock holes. Installation instructions and mounting hardware included.
$71.50
On Backorder
P-G107-BWB Pickguard - For '57 Strat®, 8 Hole, 3-Ply
Replacement pickguard for Fender® '57 Strat® models. These three-ply pickguards have eight mounting holes. Fits most American, Japanese, and Mexican '57 Stratocasters®.
Features:
  • 3-ply / 2.5mm thickness
  • 8 mounting holes
  • Shielding over electronics cavity
  • Fits 3/8" bushing pots
$10.25
P-NECK-T-33 Neck - for Telecaster Guitar, Vintage Rosewood
Replacement Vintage Telecaster® neck with mostly vintage and a few subtle modern features like 21 medium jumbo frets, 10 in. radius, 1 5/8 in. nut width, a comfortable C shaped profile and a honey tinted gloss finish. Rosewood finger board with a heel adjust truss rod location and 8.8mm peg holes drilled for a vintage Kluson® tuning machine as nature intended. Nut not included. Fender Licensed replacement neck.
$166.50
P-GTARMV01 Tremolo arm - for Vintage Stratocaster
Tremolo Arm, Screw-Down, Steel 5mm-0.8p
  • Material: Steel 5mm
  • Handle Type: Screw-down
  • Thread: M5.0 - 0.8p
  • Plating: Chrome
  • Tip: White
$4.50
P-G106-X Pickguard - for Standard Strat®, 11 Hole, 3-Ply
Colors Available:
Replacement pickguard for Fender® Standard Stratocaster models. These pickguards have eleven mounting holes and are cut for the classic strat configuration. Fits most American and Mexican Standard Stratocasters®. Features:
  • 3-ply / 2.5mm thickness
  • 11 mounting holes
  • Shielding over electronics cavity
  • Fits 3/8" bushing pots
  • Various colors available
Starting at $11.30
P-SW63 Switch - 5-Way lever for Stratocaster
Oak® single wafer 5 way lever switch.Standard U.S. size. Fits 1/16" x 1-1/16" slot. 1-5/8" center to center screw spacing. 1-3/8" cavity depth. The importance of the “right” feel required by guitarists has resulted in a continually designed and developed lever switch, providing a superior product. For over three decades, these lever switches have been tested and refined to meet the needs and desires of guitar players all over the world. Patented “T” slugs secure solder-lug clips to the stator. Mounting screws included.
$9.95
P-GTNN04 Nut - Bone, for Fender, 44.45mm X 3.3mm X 6.35, Radiused
Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm with radiused bottom.
$4.25
P-G109-X Pickguard - for American Deluxe Strat®, HSS, 11 Hole, 3-Ply
Colors Available:
Replacement pickguard for Fender® American Deluxe Strat models. These pickguards have eleven mounting holes and feature cutouts for two single coil pickups and a humbucker in the bridge position. The humbucker cutout has rounded corners for a flush fit with uncovered pickups. Fits most American Deluxe Stratocasters® that are routed for a humbucker bridge pickup.
Features:
  • 3-ply / 2.5mm thickness
  • 11 mounting holes
  • Shielding over electronics cavity
  • Fits 3/8" bushing pots
  • Various colors available
$11.30
P-PGM-X Pickguard Blanks - 12” x 18” sheet, 0.095” thickness
Color, Plys Available:
Blank pickguard material sheets for cutting custom pickguards, truss rod covers, and back plates. These sheets come in a variety of colors as well as single ply and three ply options. All colors feature a gloss surface.
$12.50
P-GTNN05 Nut - Brass, for Fender, blank un-slotted
This brass nut blank will work for most Fender® and similar style guitars and basses. It is NOT slotted and does require final shaping and fitting to exact size.
  • Thickness = 9/64 inches (3.47mm)
  • Flat Bottom Length = 1 11/16 inches (43 mm)
  • Height at ends = 13/64 inches (5.25mm)
  • Height at middle = 15/64 inches (6mm)
$6.50
P-H705 Control Plate - Jaguar Style, Master, Chrome
Jaguar style master control plate in chrome. Perfect replacement for most Jaguar style guitars. 4.12” x 1.86” plate mounting center distance (0.14” diameter, recessed).
$6.50
P-GTNN06-SLOT Nut - Graphite, for Fender, with Slots
Graphite nut for Fender® This graphite nut will work for most Fender® and similar style guitars. It is slotted, but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
  • Length = 1 41/64 inches (41.52mm)
  • Height #1 (fretboard side) = 13/64 inches (5.06mm)
  • Height #2 (headstock side) = 13/64 inches (5mm)
  • Thickness at bottom = 9/64 inches (3.46mm)
  • Thickness at top = 1/8 inches (3.1mm)
$4.55
P-H707 Neck Plate - Strat Style, Standard, Chrome
Strat style 4 bolt neck plate. (Mounting hardware not included). Four ¼” mounting holes. Made in Korea
$4.10
P-GTSPRN-X Tremolo springs - Replacement for Fender Style Tremolos
Tremolo tension springs. Similar to P-GTSPRN-5 but generic manufacture.
Starting at $1.15
P-G102 Pickguard - Tele style, 3-Ply, Black / White / Black
Three-ply black/white/black ’62 Telecaster style pickguard with 8 mounting holes. This pickguard has no pickup mounting holes for use with neck pickups that mount directly to the guitar’s body.
$7.18
P-H166 Jack Plate - Electrosocket, for Tele, chrome plated brass
This modern cupstyle Tele® jackplate is milled from brass and has a shiny plated finish. Mounts with (2) screws that are included. No more having to deal with that sharp piece of steel used to secure the old original cups. Super easy to install! The cup is even threaded so no need for the lockwasher and nut from the jack. Just simply screw the jack into the cup, solder the wires and install into your instrument!
$10.75
On Backorder
P-G105 Backplate - Strat style 3-ply, black
Three-ply black/white/black Stratocaster style back plate with 6 mounting holes.
$4.95