Hardware

Button-Head Socket Cap Screws - Class 10.9, ISO 7380 Coarse Thread. Used when a wider bearing surface or smoother, more finished appearance is desired.

Common replacement for Marshall heads and many other applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening. Fits panels 0.064" to 0.105" thick with square holes cut 0.375" to 0.38".

• M6 Threading
• Panel Range .064”-.105”
• Fits 0.375" to 0.38" Square Holes
• Zinc Finish
• Sold Individually

#6-32 threading, package of 4. Comes in 1/2" or 3/4" length. For female standoffs, see S-H172X

20 position male pin headers with a 2.54mm (0.1”) pitch. These headers use round pins that are smaller than the standard square type and are perfect for use with IC sockets, breadboards, and machine pin sockets. The breakaway construction makes fitting them to projects simple. Features:

• Round Pin
• 20 Position
• 2.54mm Spacing
• Breakaway

Fender® replacement string ferrules for Original Tele (6 ferrules)

Genuine Fender® vintage-style Strat bridge mounting screws. Some of Fender’s most requested replacement screws. Made for Fender® and used on a variety of vintage and contemporary models.

• Set of 12 replacement screws
• Genuine vintage specifications
• Nickel plating
• Phillips oval-head (#6 x 1 1/8")
• Used on American Vintage Stratocaster® guitars

Mounting bracket for vintage fuzz PCBs. This bracket is an exact replica of the bracket found in the Italian made Vox Tone Bender V828 pedals. The mounting width for the board is 1.35” which fits the P-PC-FUZZ-JEN, P-PC-BEND-MKII-BRN, and any other vintage spacing (0.15”) stripboard. The PCB mounting holes are threaded for M3 screws (sold separately). The two potentiometer holes are spaced 1.95” center to center and fit potentiometers with ⅜” bushings or smaller.

Original Switchcraft Copper Alloy Knurled Locknut (Nickel Plated) Outside Diameter:5/8" Inside diameter threading:15/32" Width: 3/32"

Nickel-plated internal tooth lock washers from Carling. These fit 15/32 and M12 bushing which are commonly used on full sized toggle switches and footswitches.

#6-32 x 1-¼” machine screws made of bronze plated steel. This style of rosette head screw is similar to the baffle mount screws found on many early Fender® tweed amplifiers. For an 8-32 rosette head screw, see S-HRS8-1116.

#10 steel finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. Made of 18-8 stainless steel.

Spring steel tooth-lock washer. Uses internal teeth for locking and tension.

Combination Drive, Nickel, 6mm, M3 metric, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.

18-8 stainless steel sheet metal screws with blunt tips. These pan head #8 screws have a length of 3/8” and are commonly used to secure the fiberboard, capacitor pan, and other hardware to the chassis of blackface and silverface amps. For the smaller #6 blunt tip machine screws found in vintage Fender® amps, see S-HBS6-516.

4 x 1.25, package of 12. For a variety of vintage and contemporary Precision and Jazz Bass models

Clip nut for 8/32" thread. For use with machine screws

Replacement nut for Marshall snap in style pots with M9 bushing.

EMI / RFI screen (grounding washer) for S2 and S4 Cliff jack sockets. This lock washer is added to S2/S4 Cliff jacks to provide a chassis/shield connection for the connection. Jacks sold separately.

Gum rubber chassis mounting washers as used on thirties vintage Zenith and Philco radio. 1/4 inner dia. Allows proper dial centering in cabinet opening. Adhesive backing for lamenating to other washers to increase thickness. Overall dimensions 7/8" dia. x 1/8" thick.

Genuine Carling Technologies dress nuts for use with full size toggle switches and footswitches. These nuts are made of a strong durable plastic and feature a chamfered edge with a knurled bottom half for a unique look that is simple to tighten down. The top of the threading is not capped so they can thread past the top of the bushing. These fit any 15/32-32UNS bushing but can also work with some M12 bushings.

#6-32 x ⅝” Phillips drive machine screws made of nickel plated steel. This style of oval head screw matches the pickup and switch mounting screws found on Fender® guitars with countersunk holes on the pickguard.

Nylon flat washers for use with foot switches. These washers are M12 size and fit both metric (M12) and imperial (15/32) bushings for compatibility with the vast majority of foot switches.

Gold rivets for fastening amplifier corners. For use on all Marshalls.

300V wire nuts for use with 18 gauge through 22 gauge wires. These wire nuts are great for use on appliances, televisions, stereos, antennas, or for any small wiring application. Rated for up to 105°C.