Hardware

Screws - Fender®, Set Screws, for Knobs
Set screws for knobs. Package of 24. Fits: U.S. Telecaster / P-Bass chrome knobs and vintage-style knobs. Fender part number: 099-4922-000
$5.15
package of 24
Screw - #6 x 1”, Slotted, Oval Head, Wood, Nickel-plated
#6 x 1” slotted drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on early Fender® tweed amps to secure the back panels. They are also the same type used for securing strap buttons as well as for mounting the bridge plate on early Telecaster® guitars including the Nocaster® and Esquire® guitars.
$1.75
package of 4
Rivets - Marshall, Silver, for fastening
Silver rivets for fastening amplifier corners. For use on all Marshalls.
Starting at $8.95
Screw - #4 x 1 ¼”, Phillips, Round Head, Wood, Nickel-plated
#4 x 1 ¼” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used on Fender® bass pickups, Telecaster® pickups mounted directly to the body, and some P90 pickups.
$2.15
package of 5
Screw - M6-1.0 x 30mm, Phillips, Pan Head, Zinc, coarse thread
Phillips pan head machine screw, 1 x 30. Designed to go through a pre-tapped hole or nut to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$2.19
package of 5
Heat Sink - For TO-220, Through Hole, Vertical Mount
Black extruded heatsink with radial fins for use with TO-220 and TO-202 transistor packages.
$3.25
Nut - Black Bone, Pre-slotted, Strat and Tele style, 9.5" Radius
Pre-slotted black bone nuts for Stratocaster®, Telecaster®, and other Fender® necks with a 9.5” radius. A 9.5” fingerboard has been the standard Fender® neck radius since the 1980s. The bone used for the pre-shaped and pre-slotted nuts is dyed black using a process that results in a fully black nut.
  • Height - 5.4 mm
  • Width - 42.86 mm
  • Thickness - 3.3 mm
  • Radius - 9.5 in.

For a version of this nut with a 7.25” radius, see P-GTNN20.
$7.85
Nut - Hex Nut, For Mini Toggle Switches
Hex nuts for use with mini toggle switches. These nickel plated dress nuts work on any 1/4-40 UNS threaded bushing. These are the same as the stock nuts included with Carling mini toggle switches.
$1.95
package of 5
Screw - #8 x 1 ¾”, Slotted, Oval Head, Wood, Nickel-plated
#8 x 1 ¾” slotted drive wood screws made of nickel plated steel. This style of oval head screw is commonly used for mounting the bridge plate on early Telecaster® guitars including the Nocaster® and Esquire® guitars.
$2.59
package of 4
Screws - Dunlop, MXR, housing screws
Genuine Dunlop replacement housing screws for MXR/ Dunlop pedals. Replace lost screws and keep your battery access plate on tight. 6-32 thread, Phillips head.
$3.27
package of 4
Ferrules - Fender®, for American Strat / Telecaster, chrome
Fender® replacement string ferrules for American Series and Mexican Stratocaster® and Telecaster®.
$8.45
package of 6
Screw - #4 x ½”, Slotted, Oval Head, Wood, Nickel-plated
#4 x ½” slotted drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on early Telecaster® pickguards including the Nocaster® and Esquire® guitars.
$1.79
package of 5
Tool - Hand Riveter, 3/32”, ⅛”, 5/32”, and 3/16”
Hand riveter with four nose pieces and 100 rivets. The included nose pieces fit 3/32”, 1/8”, 5/32”, and 3/16” rivets. A small wrench is tucked into the grip so users can quickly change the nose pieces as needed. This set includes 100 rivets; 25 in each of the compatible sizes.
  • 3/32”, 1/8”, 5/32”, and 3/16” nose pieces
  • All-steel construction
  • Comfortable vinyl grip
  • Easily switch between nose sizes using the included wrench
$9.95
Nut - Black Bone, Pre-slotted, Strat and Tele style, 7.25" Radius
Pre-slotted black bone nuts for Stratocaster®, Telecaster®, and other Fender® necks with a 7.25” radius. A 7.25” fingerboard radius originated in the early 1950s and was used for most Fender® electric instruments until the 1980s.
  • Height - 5.4 mm
  • Width - 42.86 mm
  • Thickness - 3.3 mm
  • Radius - 7.25 in.

For a version of this nut with a 9.5” radius, see P-GTNN21.
$7.85
Screw Set - Leslie, Back Panel, 13 Phillips Screws, Washers
Set of 13 phillips head screws for Leslies. Includes 13 flat washers. 13 pieces replaces all of the screws on the upper cover, lower cover and middle back panel.
$10.95
package of 13
Nut - Cliff, Hex, Plated Steel
Hexagonal, plated steel nut for Cliff UK jacks. This nut fits Cliff jacks with 7/16″ UNF, 20 TPI threading.
$1.75
Screw - #6 x 1 ¼”, Phillips, Round Head, Wood, Nickel-plated
#6 x 1 ¼” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used on vintage style Fender® Stratocaster® bridges mounted directly to the body using six screws.
$2.59
package of 6
Screw - #3 x ⅜”, Slotted, Round Head, Sheet Metal, Nickel-plated
#3 x ⅜” slotted drive wood screws made of nickel plated steel. This style of round head screw is commonly used to secure Kluson and Kluson style tuners as well as string trees on early Telecaster® guitars including the Nocaster® and Esquire® guitars.
$2.95
package of 7
Connector - Uninsulated Fork Terminal, #8
Uninsulated fork terminals for use with #8 studs. These terminals fit 22AWG through 16AWG wire gauges and feature a serrated barrel for a strong crimped connection. Made of tin plated copper.
$2.50
package of 10
Hedlock Fastener - 4 Sets of 2 Clips
These super sturdy fasteners are great for speaker covers or helping prevent earthquake damage. 4 sets of 2 clips (package of 8).
$1.00
package of 8
Screw - 6-32 x ⅝”, Slotted, Round Head, Machine, Nickel-plated
#6-32 x ⅝” slotted drive machine screws made of nickel plated steel. This style of round head screw matches the pickup and switch mounting screws found on early Telecaster® guitars including the Nocaster® and Esquire® guitars.
$2.15
package of 5
Nut & Washer - Panel, for ⅜" Potentiometers and Jacks
Replacement nut and washer for pots and jacks that feature a ⅜" bushing with 3/8-32 threading. Sold in packs containing 100 nuts and 100 washers.
$25.00
package of 100
Screw - 6-32 x ⅝”, Phillips, Round Head, Machine, Nickel-plated
#6-32 x ⅝” Phillips drive machine screws made of nickel plated steel. This style of round head screw matches the pickup and switch mounting screws found on Fender® guitars such as Stratocasters® and Telecasters®.
$3.25
package of 5
Screw - #2 x ⅜, Phillips, Oval Head, SMS, Zinc
#2 x 3/8", zinc, oval head, phillips, sms screws. Package of 25.
$4.00
package of 25