Hardware

Screwdriver Set - Xcelite, Mini, 6 pieces
6-Piece Mini-driver Kit. Features:
  • Miniature version of compact convertible set. for precise detail work.
  • Mini-drivers consist of jeweler's type and Phillips® screwdriver blades.
  • Molded in color-coded plastic handles.
  • Contains a black torque amplifier handle.
  • Furnished in see-through plastic case.
$27.95
package of 6
Nut & Washer - Panel, for ⅜" Potentiometers and Jacks
Replacement nut and washer for pots and jacks that feature a ⅜" bushing with 3/8-32 threading. Sold in packs containing 100 nuts and 100 washers.
$25.00
package of 100
Screw Set - Leslie, Back Panel, 13 Phillips Screws, Washers
Set of 13 phillips head screws for Leslies. Includes 13 flat washers. 13 pieces replaces all of the screws on the upper cover, lower cover and middle back panel.
$10.95
package of 13
Tool - Hand Riveter, 3/32”, ⅛”, 5/32”, and 3/16”
Hand riveter with four nose pieces and 100 rivets. The included nose pieces fit 3/32”, 1/8”, 5/32”, and 3/16” rivets. A small wrench is tucked into the grip so users can quickly change the nose pieces as needed. This set includes 100 rivets; 25 in each of the compatible sizes.
  • 3/32”, 1/8”, 5/32”, and 3/16” nose pieces
  • All-steel construction
  • Comfortable vinyl grip
  • Easily switch between nose sizes using the included wrench
$9.95
Screws - Original Fender, Vintage Speaker Mounting Stud / Nut
Original Fender speaker mounting stud/nut set. These speaker mounting studs were used on countless amps of the '50s, '60s, '70s, and beyond. The reverse thread section screws into the baffle wood and the machine screw section holds the speaker in place using the included keps nuts.
  • Used on early ’50s and ’60s vintage amplifiers
  • Fits most vintage and modern amplifiers
  • 1” of 8-32 machine head thread
  • ¼” of reverse wood thread
  • 1-½” overall length
  • 8-32 keps nuts included

Fender part number: 099-2094-000
$8.95
package of 12
Rivets - Marshall, Silver, for fastening
Silver rivets for fastening amplifier corners. For use on all Marshalls.
Starting at $8.95
Rivets - Marshall, Gold, for fastening
Gold rivets for fastening amplifier corners. For use on all Marshalls.
Starting at $8.95
Ferrules - Fender®, for Original Telecaster, nickel, set of 6
Fender® replacement string ferrules for Original Tele (6 ferrules)
$8.75
package of 6
Ferrules - Fender®, for American Strat / Telecaster, chrome
Fender® replacement string ferrules for American Series and Mexican Stratocaster® and Telecaster®.
$8.45
package of 6
Screw - phillips, for pickguards / control plates
Colors Available:
Pick guard screws, phillips, ovalhead. Great for mounting countersunk pickguards, control plates, etc.
  • 7/16” threaded portion
  • Available in Black, Gold, Nickel, and Chrome plating
  • Package of 100
Starting at $8.39
package of 100
Nut - Black Bone, Pre-slotted, Strat and Tele style, 9.5" Radius
Pre-slotted black bone nuts for Stratocaster®, Telecaster®, and other Fender® necks with a 9.5” radius. A 9.5” fingerboard has been the standard Fender® neck radius since the 1980s. The bone used for the pre-shaped and pre-slotted nuts is dyed black using a process that results in a fully black nut.
  • Height - 5.4 mm
  • Width - 42.86 mm
  • Thickness - 3.3 mm
  • Radius - 9.5 in.

For a version of this nut with a 7.25” radius, see P-GTNN20.
$7.85
Nut - Black Bone, Pre-slotted, Strat and Tele style, 7.25" Radius
Pre-slotted black bone nuts for Stratocaster®, Telecaster®, and other Fender® necks with a 7.25” radius. A 7.25” fingerboard radius originated in the early 1950s and was used for most Fender® electric instruments until the 1980s.
  • Height - 5.4 mm
  • Width - 42.86 mm
  • Thickness - 3.3 mm
  • Radius - 7.25 in.

For a version of this nut with a 9.5” radius, see P-GTNN21.
$7.85
Nut - Black Bone, Pre-slotted, Gibson Style
Pre-slotted black bone nuts for Gibson necks with a 12” radius. A 12” fingerboard is the common radius used on most Gibson guitars. The bone used for the pre-shaped and pre-slotted nuts is dyed black using a process that results in a fully black nut.
  • Height - 9.3 mm
  • Width - 43.4 mm
  • Thickness - 4.8 mm
  • Radius - 12 in.
$7.85
$7.30
package of 6
Screw - 6-32 x ¼", Hammond, Self-Tapping, Combination Pan Head, Black
Black 6-32 self-tapping screw from Hammond with a ¼” thread length. These screws pair perfectly with their black powder coated sheet metal chassis boxes.
$6.50
package of 6
Insulation - GC Electronics, fibroid, "fish paper"
Vulcanized Cellulose Fiber for all electrical insulation. Gray insulating paper. .010" thick. used in switches, under terminals, in transformers, etc .where mechanical strength is required. Its qualities of toughness, flexibility, and edge-tearing resistance combined with high dielectric strength and ready absorption of insulating varnish have led to its predominant use as an improved motor slot call insulation. Dielectric strength 3000 volts. 10" wide roll contains 240 sq. inches.
$6.25
Washers - Grover, Replacement For Tuner Knobs, Set
Full set of replacement washers for Grover tuners. These are the washers that are between the arm of the tuner and the tuner’s knob. All three washers are used on a single tuner. Includes 6 nylon washers, 6 spring washers, and 6 flat washers.
$5.95
package of 6
Bracket - for PCB mounting, replica of Vintage Fuzz
Mounting bracket for vintage fuzz PCBs. This bracket is an exact replica of the bracket found in the Italian made Vox Tone Bender V828 pedals. The mounting width for the board is 1.35” which fits the P-PC-FUZZ-JEN, P-PC-BEND-MKII-BRN, and any other vintage spacing (0.15”) stripboard. The PCB mounting holes are threaded for M3 screws (sold separately). The two potentiometer holes are spaced 1.95” center to center and fit potentiometers with ⅜” bushings or smaller.
$5.95
Screws - Gretsch®, Bezel Mount, Chrome
Genuine Gretsch® screws for mounting Gretsch pickup rings to the guitar's body. These chrome oval-head wood screws come in a pack of 12.
Accessory to P-PUGRETMR-S
$5.49
Finishing Washer - Nickel-plated Brass, Countersunk, Flanged, Fender Style
Flanged finishing washers made of nickel plated brass. Designed for accommodating the heads of countersunk screws. These washers provide additional bearing area on the material being fastened and can be used to give a neat, finished appearance. This design closely resembles the flanged finishing washers found on later blackface and silverface Fender® amplifier cabinets. The #6 size is used for back panels on combo amps and heads. The #8 is used for extension cabinet back panels. For the earlier flush style finishing washers used on these amps, see S-HXFW-1N.
Starting at $5.35
package of 10
Nut - Fender®, Hex, for Rean Jacks
Hex nuts for Rean jacks. Package of 12 Genuine Fender replacement jack nuts: 7/16-20 x 1/8 nickel-plated Used with many Fender amplifier jacks
$5.25
package of 12
Screw - Fender®, Pickup Mounting, for P-Bass & J-Bass
4 x 1.25, package of 12. For a variety of vintage and contemporary Precision and Jazz Bass models
$5.15
package of 12
Screws - Fender®, Set Screws, for Knobs
Set screws for knobs. Package of 24. Fits: U.S. Telecaster / P-Bass chrome knobs and vintage-style knobs. Fender part number: 099-4922-000
$5.15
package of 24
Screws - Fender®, Saddle Height Screws
Set of hex set screws used for saddle-height adjustment on American Vintage series Stratocaster and Telecaster bridges.
  • Set of 12 hex set screws
  • For American Vintage Stratocaster and Telecaster guitars
  • Comes with four 4-40 x 3/8" hex screws and eight 4-40 x 5/16" hex screws.
$4.95
package of 12
On Backorder