Hardware
Solder Tag - M3.5 or #6 Mounting Hole
Package of 12
Flat-washer style solder tag for use with M3.5 or #6 screws. This small solder tag is an easy way to add a wire such as a chassis ground connection to a build. This solder tag is also a great match for vintage style builds such as Fuzz Face style effects pedals.- Contact Material: Brass
- Contact Plating: Tin
- Inner Diameter: 3.5± 0.2 mm
- Outer Diameter: Ø6.3 ± 0.2 mm
- Length: 12.7 ± 0.5 mm
- Thickness: 0.35 mm
$1.25
Terminal Pin - PCB Mount, 0.05” Diameter, 0.25” Length
PCB mount terminal pin made of tinned brass. This pin fits 0.064” mounting holes and can be swage or solder mounted. The pin diameter is 0.05” and has a total length of 0.25” when mounted. Great for connecting offboard wiring by soldering directly to the pin or using an appropriate connector.
$0.79
Washer - Internal Tooth Lock, ¼”, For Mini Toggle Switches
Package of 5
Spring steel tooth-lock washer. Uses internal teeth for locking and tension. The 0.25 inch size fits Carling mini toggle switches along with any other ¼” bushing item.
$1.25
Screw - Oval Head, #8 x 1.5”, for Neck Mounting
Package of 4
#8 x 1.5” inch neck mounting screws. These neck mounting screws are chrome plated and are the standard screws used on many bolt-on neck guitars. Includes a full set of four Phillips screws.
$1.49
PC Lock-In Support - Nylon, sturdy for mounting
Designed for 0.156” PCB mounting hole diameter, 0.187” chassis mounting hole diameter, 0.062” PCB thickness, 0.062” chassis thickness.
Package of 5
Nylon lock-in supports for mounting printed circuit boards.- Locks onto .062 (1.57) thick PC board
- Board is positively locked until manually released
- Board is easily releasable for repairs or upgrades
- Sturdy support due to high contact area with chassis
Designed for 0.156” PCB mounting hole diameter, 0.187” chassis mounting hole diameter, 0.062” PCB thickness, 0.062” chassis thickness.
Starting at $1.05
Screw - 6-32, Phillips, Pan Head, Machine, Zinc
Package of 5
Phillips panhead machine screw, 6-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$0.65
Nut - Dress Nut, For Mini Toggle Switches
Dress nuts for use with mini toggle switches. These plated dress nuts feature a chamfered edge for a professional look and work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
Colors Available:
Starting at $0.59
Screw - #2 x ⅜, Phillips, Oval Head, SMS, Zinc
Package of 25
#2 x 3/8", zinc, oval head, phillips, sms screws. Package of 25.
$4.00
Finishing Washer - Blackface / Silverface, Plated Metal
Plated metal finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. These high quality washers closely resemble the washers found on many vintage blackface and silverface amplifiers. Fits with #8 countersunk screws.
Package of 10
Colors Available:
Starting at $1.25
Washer - Fiber Shoulder, 0.625" outer diameter
Package of 5
Fiber Shoulder Washer Overall Outer Diameter = 0.625" Center Hole Diameter = 0.385" sold in packages of 5
$1.20
Washers - Grover, Replacement For Tuner Knobs, Set
Package of 6
Full set of replacement washers for Grover tuners. These are the washers that are between the arm of the tuner and the tuner’s knob. All three washers are used on a single tuner. Includes 6 nylon washers, 6 spring washers, and 6 flat washers.
$5.95
Screws - Fender®, Saddle Height Screws
Package of 12
Set of hex set screws used for saddle-height adjustment on American Vintage series Stratocaster and Telecaster bridges.- Set of 12 hex set screws
- For American Vintage Stratocaster and Telecaster guitars
- Comes with four 4-40 x 3/8" hex screws and eight 4-40 x 5/16" hex screws.
$4.95
Screw - M4 x 0.70, Phillips, Pan Head, Stainless Steel, Machine
Package of 4
Metric Threading: M4 x 0.70 - 20 mm long pan head machine screws. Stainless steel.
$0.80
Ferrules - Gotoh, TLB-1, for Guitar, Chrome
Package of 6
The Gotoh TLB-1 is a high quality set of guitar string ferrules. These press fit ferrules are a great choice for Telecaster® guitars or any guitar with a string through bridge. Includes six ferrules.
$4.25
Screws - Fender®, Set Screws, for Knobs
Package of 24
Set screws for knobs. Package of 24. Fits: U.S. Telecaster / P-Bass chrome knobs and vintage-style knobs. Fender part number: 099-4922-000
$5.15
Screws - Gretsch®, Bezel Mount, Chrome
Genuine Gretsch® screws for mounting Gretsch pickup rings to the guitar's body. These chrome oval-head wood screws come in a pack of 12.
Accessory to P-PUGRETMR-S
Accessory to P-PUGRETMR-S
$5.49
Screw - Bigsby, Regular #125, Hinge
Genuine Bigsby® mounting screws. These are the same screws that come stock with many Bigsby® vibrato units. These wood screws are for mounting the hinge to the edge of the guitar body.
Colors Available:
$3.45
Dress Nut - Befaco, Bananuts, for M7 Pots
Larger threaded black Bananuts for mounting potentiometers or other hardware with M7 bushings. These nuts look great beneath smaller sized knobs.
Nut - Cage, Zinc, 10-24, Electroplate Panel Range .064-.105
Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.
- 10-24 Threading
- Panel Range .064-.105
- Zinc Finish
- Sold Individually
$0.95
Screw - #8, Phillips, Pan Head, Self-Tapping, Zinc
Package of 5
Self tapping Phillips panhead machine screw #8, zinc type AB. Type AB screws tap their own mating internal thread. They require a preformed hole for installation into metallic materials but not necessary for wood or plastic materials. Combines locating point of Type A with thread size and pitch of Type B. Normal limitations of Type B apply. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Provides good control in driving and is the most recommended drive.
Starting at $0.72
Screw - #6, 1 ½", Self-Tapping, Phillips Pan Head, Zinc
#6 x 1 ½” zinc type AB. Type AB screws tap their own mating internal thread. They require a preformed hole for installation into metallic materials but necessary for wood or plastic materials. Combines locating point of Type A with thread size and pitch of Type B. Normal limitations of Type B apply. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Provides good control in driving and is the most recommended drive.
$0.25
Solder Lug - #6 or #8 Hole, Locking
Package of 10
Locking terminal lugs, #6 or #8 hole, 5/8" length, angled. Package of 10
Starting at $1.70
Screw - M3, Painted, Combination Head, Binding, 6mm
Combination Drive, Colored Head Binding Screws, 6mm, M3, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Package of 5
Colors Available:
$1.75
Nut - M8x0.75 hex, for potentiometers / switches / jacks
Package of 5
M8 x 0.75 threaded hex nut. For use on potentiometers, switches, and jacks.
$1.25