Hardware

#6-32 x ⅝” Phillips drive machine screws made of nickel plated steel. This style of round head screw matches the pickup and switch mounting screws found on Fender® guitars such as Stratocasters® and Telecasters®.

#4 x 1 ¼” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used on Fender® bass pickups, Telecaster® pickups mounted directly to the body, and some P90 pickups.

#6 Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® tweed, blackface, and silverface combos and heads to secure the back panel. They are also the same type used for securing strap buttons as well as for mounting the bridge plate on Telecaster® guitars.

#3 x ⅜” Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Gibson® pickguards, truss rod covers, and some humbucker rings.

#4 x ½” slotted drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on early Telecaster® pickguards including the Nocaster® and Esquire® guitars.

#8 x 1 ¾” slotted drive wood screws made of nickel plated steel. This style of oval head screw is commonly used for mounting the bridge plate on early Telecaster® guitars including the Nocaster® and Esquire® guitars.

#8-32 x 1 1/16” machine screws made of brass plated steel. This style of rosette head screw is similar to the baffle mount screws found on many early Fender® tweed amplifiers. For a 6-32 rosette head screw, see S-HRS6-114.

#6-32 x ⅝” slotted drive machine screws made of nickel plated steel. This style of round head screw matches the pickup and switch mounting screws found on early Telecaster® guitars including the Nocaster® and Esquire® guitars.

#3 x ⅜” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used to secure Kluson and Kluson style tuners as well as string trees on Fender® guitars.

#6 x 1 ¼” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used on vintage style Fender® Stratocaster® bridges mounted directly to the body using six screws.

#8 Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® blackface and silverface speaker cabinets to secure the back panel. They are also used to attach baffle boards on amps from this era. They are also the same type used for securing strap buttons as well as for mounting necks on Telecaster®, Stratocaster®, and other Fender® guitars.

#4 x ½” Phillips drive sheet metal screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® pickguards, tremolo covers, and some bridge covers.

#6 x 1” slotted drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on early Fender® tweed amps to secure the back panels. They are also the same type used for securing strap buttons as well as for mounting the bridge plate on early Telecaster® guitars including the Nocaster® and Esquire® guitars.

#6-32 x 1-¼” machine screws made of bronze plated steel. This style of rosette head screw is similar to the baffle mount screws found on many early Fender® tweed amplifiers. For an 8-32 rosette head screw, see S-HRS8-1116.

#6-32 x ⅝” Phillips drive machine screws made of nickel plated steel. This style of oval head screw matches the pickup and switch mounting screws found on Fender® guitars with countersunk holes on the pickguard.

#3 x ¼” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used on Gibson® truss rod covers.

Slotted dress nut for ⅜”-32 threaded bushing such as standard Switchcraft ¼” jacks and CTS potentiometers. These plated brass nuts add a sleek look to any amplifier, pedal or guitar. This style of nut has a similar look to slotted round nuts found on plexi Marshall amps.

#6-32 threading, package of 4. Comes in 1/2" or 3/4" length. For female standoffs, see S-H172X

Spring steel tooth-lock washer. Uses internal teeth for locking and tension.

Flanged finishing washers made of nickel plated brass. Designed for accommodating the heads of countersunk screws. These washers provide additional bearing area on the material being fastened and can be used to give a neat, finished appearance. This design closely resembles the flanged finishing washers found on later blackface and silverface Fender® amplifier cabinets. The #6 size is used for back panels on combo amps and heads. The #8 is used for extension cabinet back panels. For the earlier flush style finishing washers used on these amps, see S-HXFW-1N.

Genuine Carling Technologies dress nuts for use with full size toggle switches and footswitches. These dress nuts feature a chamfered edge with a knurled bottom half for a unique look that is simple to tighten down. The top of the threading is capped. These fit any 15/32-32UNS bushing but can also work with some M12 bushings.

Wide dress nuts for use with full size toggle switches and footswitches. These dress nuts feature a wide chamfered edge that pairs nicely with smaller dress nuts such as P-H54-DRESS-WIDE, P-H54-DRESS-THRU, and P-H54-NUT-DRESS. These nuts are threaded through and fit any 15/32-32UNS bushing such as Carling footswitches and full sized toggles.

Switchcraft shoulder washer for 3/8” bushing. Perfect for insulating metal bushings from the chassis, use with W-SC-S1028. Minimum chassis hole diameter of 0.44” required to accommodate the shoulder.

Phillips panhead machine screw, 10-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.