Hardware

Nut - Black Bone, Pre-slotted, Strat and Tele style, 7.25" Radius
Pre-slotted black bone nuts for Stratocaster®, Telecaster®, and other Fender® necks with a 7.25” radius. A 7.25” fingerboard radius originated in the early 1950s and was used for most Fender® electric instruments until the 1980s.
  • Height - 5.4 mm
  • Width - 42.86 mm
  • Thickness - 3.3 mm
  • Radius - 7.25 in.

For a version of this nut with a 9.5” radius, see P-GTNN21.
$7.85
Nut - Black Bone, Pre-slotted, Strat and Tele style, 9.5" Radius
Pre-slotted black bone nuts for Stratocaster®, Telecaster®, and other Fender® necks with a 9.5” radius. A 9.5” fingerboard has been the standard Fender® neck radius since the 1980s. The bone used for the pre-shaped and pre-slotted nuts is dyed black using a process that results in a fully black nut.
  • Height - 5.4 mm
  • Width - 42.86 mm
  • Thickness - 3.3 mm
  • Radius - 9.5 in.

For a version of this nut with a 7.25” radius, see P-GTNN20.
$7.85
Nut - Black Bone, Pre-slotted, Gibson Style
Pre-slotted black bone nuts for Gibson necks with a 12” radius. A 12” fingerboard is the common radius used on most Gibson guitars. The bone used for the pre-shaped and pre-slotted nuts is dyed black using a process that results in a fully black nut.
  • Height - 9.3 mm
  • Width - 43.4 mm
  • Thickness - 4.8 mm
  • Radius - 12 in.
$7.85
Nut - 8-32, Keps with external tooth, zinc
Nut - Keps with external tooth, Zinc, fits screws for chassis straps, 8-32 X 3 1/4, package of 10. Popular low-cost lock nut for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
$1.25
package of 10
Nut - Wide Dress Nut, Threaded Through, 15/32-32UNS
Wide dress nuts for use with full size toggle switches and footswitches. These dress nuts feature a wide chamfered edge that pairs nicely with smaller dress nuts such as P-H54-DRESS-WIDE, P-H54-DRESS-THRU, and P-H54-NUT-DRESS. These nuts are threaded through and fit any 15/32-32UNS bushing such as Carling footswitches and full sized toggles.
$1.75
Nut - Large Dress Nut, Carling, 15/32-32UNS
Colors Available:
Genuine Carling Technologies dress nuts for use with full size toggle switches and footswitches. These dress nuts feature a chamfered edge with a knurled bottom half for a unique look that is simple to tighten down. The top of the threading is capped. These fit any 15/32-32UNS bushing but can also work with some M12 bushings.
$1.29
Nut - Hex Nut, For Mini Toggle Switches
Hex nuts for use with mini toggle switches. These nickel plated dress nuts work on any 1/4-40 UNS threaded bushing. These are the same as the stock nuts included with Carling mini toggle switches.
$1.95
package of 5
Nut - CTS, 3/8-32, Nickel, for 450 Series Potentiometers
Replacement nut for CTS 450 series potentiometers and others.
  • 3/8-32 threading
  • Sold individually
$0.55
Nut - for Marshall, Hex Type, M9, for Potentiometers
Replacement nut for Marshall snap in style pots with M9 bushing.
$0.75
package of 5
Nut - M8x0.75 hex, for potentiometers / switches / jacks
M8 x 0.75 threaded hex nut. For use on potentiometers, switches, and jacks.
$1.25
package of 5
Nut & Washer - Panel, for ⅜" Potentiometers
Replacement nut and washer for pots with a ⅜" bushing diameter.
$0.75
Nut & Washer - Panel, for ⅜" Potentiometers and Jacks
Replacement nut and washer for pots and jacks that feature a ⅜" bushing with 3/8-32 threading. Sold in packs containing 100 nuts and 100 washers.
$25.00
package of 100
Nut & Washer - for M7x0.75 Potentiometers
Replacement nut for Marshall style pots with 7mm bushing. Sold individually
$0.25
Nut - Hex, for Carling switches, ~\frac{15}{32}~"
Hex nut for Carling switches, 15/32". Sold individually.
$0.40
Wire Nut - 18-22AWG, 300V, Rated for 105°C
300V wire nuts for use with 18 gauge through 22 gauge wires. These wire nuts are great for use on appliances, televisions, stereos, antennas, or for any small wiring application. Rated for up to 105°C.
$1.23
Save 15%
Originally: $1.45
package of 20
Nut - Fender®, Hex, for Rean Jacks
Hex nuts for Rean jacks. Package of 12 Genuine Fender replacement jack nuts: 7/16-20 x 1/8 nickel-plated Used with many Fender amplifier jacks
$5.25
package of 12
Nut & Washer - Panel, for Fender / Marshall Jacks
M12 x1.0 threading. Nut and washer set for panel-mounting jacks.
$1.55
package of 5
Nut - Cliff, Hex, for mounting ¼" Jacks
Nut - Hex, for Cliff UK Jacks S-H902, S-H903, S-H904, & S-H905
$0.50
Nut - Cliff, Hex, Plated Steel
Hexagonal, plated steel nut for Cliff UK jacks. This nut fits Cliff jacks with 7/16″ UNF, 20 TPI threading.
$1.75
Nut - Cliff, Hex, Red, used on Loudspeaker Output Jacks
Red Cliff hex nut, often used on guitar amplifiers to identify loudspeaker outputs.
$0.89
Nut - Cliff, Hex, for ¼" white Jacks
Hex nut for white Cliff Jacks, threading: 7/16-20. Also used on the footswitch jack in some Marshall amps.
$0.89
Nut - Hex, Brass, Imperial Thread
Imperial threaded hex nuts made of solid brass. These brass hex nuts visually match the nuts found in vintage Marshall amplifiers. They are a great choice for restoration or replica builds. These will also work well in many other types of projects. Pairs with S-HSB4-X, S-HSB6-X, and S-HSB8-12 screws. S-HLWX-B lock washers and S-HBWX flat washers are also available.
Starting at $1.09
package of 5
Nut - Cage, Zinc-plated Steel, M6, Panel Range .064-.105”
Common replacement for Marshall heads and many other applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening. Fits panels 0.064" to 0.105" thick with square holes cut 0.375" to 0.38".
  • M6 Threading
  • Panel Range .064”-.105”
  • Fits 0.375" to 0.38" Square Holes
  • Zinc Finish
  • Sold Individually
$1.39
Nut - Cage, Zinc, 10-24, Electroplate Panel Range .064-.105
Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.
  • 10-24 Threading
  • Panel Range .064-.105
  • Zinc Finish
  • Sold Individually
$0.95