You are here

Holiday Gifts

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(15 pages)
K-AMP-1Hybrid Tube Amp - desk-sized tube amplifier
Clear sound of solid-state amp and soothing warm sound of tube amp - this company cubic amp enjoys the good aspects of those two different types of amplifiers. Deck your desk with this sophisticated amp and its pleasant sound.Features

  • Hybrid of vacuum tube input buffer + D-class speaker amp (AB-class headphone amp built-in)
  • DC-controlled electronic volume built-in the amplifier IC. Therefore the volume deflection between right and left channels at small sound volume is minimized.
  • Headphone output
  • Built-in USB-DAC for PC connection
  • Interlocking the amp power ON/OFF with the PC USB power selectable
  • Assembly kit for users to experience the fun of DIY (A PCB is preassembled, no soldering is required. For assembly, users will need a long-nose pliers and a screwdriver only. (A hex wrench is included.))
$285.00
$250.80
You save: 12%
Click to read more
K-MOD103Effects Kit - MOD® Kits, The Wave, Spring Reverb
The Wave is a versatile stand-alone, tube driven analog spring reverb unit kit. It can be used in front of your guitar amp or as a line-level analog reverb effect for the recording studio. Two controls allow you to serve up a wide range of wetness from just a touch to over the top psychedelia. The "dwell" control adjusts the input signal level driving the tank and the "reverb" control adjusts the level of output reverberations from the tank.

The Wave's all tube design utilizes four dual triode vacuum tubes - three 12AX7s and one 12AT7 - and comes with a MOD® three-spring reverb tank. MOD® reverb tanks are deemed the closest to the original reverb tanks from the '60s made today. The Wave's reverb function can be switched in and out pop-free via the front panel toggle or with a footswitch. Footswitch sold separately (see P-H470 for compatible footswitch).
$275.00
$242.00
You save: 12%
Click to read more
K-MOD102Amp Kit - MOD® Kits, MOD102 guitar amplifier

For the non-US version of the MOD 102, please see K-MOD102-F MOD 102 Guitar Amp Kit Features:



  • All Tube Design (solid-state diodes used only for full-wave rectification)
  • 5W output power into 8 Ohm
  • 1 channel
  • Vintage channel controls: bass, treble and volume
  • Vintage pilot lamp and screw-on jewel cover for power-on indication
  • Output Impedance: 8 Ohm
  • Tubes included: one 12AX7 (preamp), one EL84 (JJ Electronic brand)
  • Hammond Mfg 269EX power transformer and P-T31 single ended output transformer
  • Cathode biased class

$215.00
$189.20
You save: 12%
Click to read more
K-502Amp Kit - Stereo Integrated Tube Amplifier
Tube designs rival the sound of high end audio amplifiers that cost 10 times as much! This kit was designed by George Fathauer. Enjoy the thrill of high end audio without going broke and enjoy the satisfaction in building it yourself. Kit comes complete will all parts and easy to follow instructions. Easily built in one evening. Uses 11BM8 tubes included in the kit. Also included pine board for mounting PC board and transformers.
$204.95
$180.36
You save: 12%
Click to read more
S-TBM4Bias Master™ - TAD, with 4 Octal Probes
BIASMASTER System BM4 Measures BIAS current of any 6L6GC, 6550, EL34, 6V6GT, 5881, KT66, KT88, KT90, KT100, KT120, 7027A etc. in your amp. Includes 4 octal probes (2x S-TBMA2) and english/german operation manual.
The BiasMaster™ allows to monitor the bias current savely and easily. While adjusting the Bias control pot of your amp the BiasMaster™ does show the actual result.
$195.00
$171.60
You save: 12%
Click to read more
S-TBM4-EL84Bias Master™ - TAD, with 4 Noval Probes
BIASMASTER System BM4-EL84 Measures BIAS current of any EL84 etc. in your amp. Includes 4 noval probes (2x S-TBMA2-EL84) and english/german operation manual.
The BiasMaster™ allows to monitor the bias current safely and easily. While adjusting the Bias control pot of your amp the BiasMaster™ does show the actual result. This lets you set and evaluate all reasonable biasing range your amp and tubes offers to find and set your personal perfect choice.
The Bias setting has a dramatic impact on the amp's response, break-up and dynamic character.
$195.00
$171.60
You save: 12%
Click to read more
M-OD9Effects Pedal - Maxon, OD9, Overdrive
Improved circuitry featuring the JRC4558 IC yields the ultra-smooth, creamy, dynamic overdrive so sought after by guitarists.
Overdrive and output level controls adjust the intensity of overdrive and output volume, while the Hi Boost/Hi Cut Tone control adjusts the brightness from warm and smooth to sizzling hot.
While the M-OD808 may have been the first overdrive circuit of its kind, it was the OD-9 that cemented this sound in the history of Rock & Roll guitar. Looking at the OD-9's circuit, you'll realize that this is not some redesign being cleverly marketed as a reissue – this is THE original OD-9 (TS-9) circuit, yet with the addition of true bypass switching.
$159.00
$139.92
You save: 12%
Click to read more
M-OD808Effects Pedal - Maxon, OD808, Overdrive
The Original Overdrive! The OD808 is often imitated but never matched! Identical to the 1970s circuit and featuring the JRC4558 IC chip, it offers warm, smooth, transparent overdrive that'll make your rig scream!
The OD808's dynamically responsive circuitry reacts precisely to individual playing styles, letting the true voice of any instrument or artist shine through. Don't settle for copies when you can have the original.
The OD808 Reissue offers up all the warm, creamy, organic overdrive as the original and then some. Never one to rest on their laurels, Maxon has tweaked the current version ever so slightly to reduce noise level while retaining the legendary “808" tone.
The OD808 is the perfect pedal for adding smooth, tube-like overdrive to any clean amp – use it as a secondary dirt channel to beef up a song's chorus section, or keep it on all the time for the crunchy tone that has defined rock and roll.
$149.00
$131.12
You save: 12%
Click to read more
T-12AX7-SETTube Set - 12AX7 Sampler

Tired of all the hullabaloo when it comes to vacuum tubes? The 12AX7 is the most widely used tube today and is also one of the most important components in your tube amp's tone. The 12AX7 Sampler Set (includes 10 different tubes) allows you to try the most popular choices today and see for your self what the differences are. Preamp tubes can be easily swapped in and out of your amp without the need for biasing. We reserve the right to substitute any of these tubes with one of equal value based on availability.



  • 12AX7-S-JJ: JJ Brand.

$136.04
$119.72
You save: 12%
Click to read more
K-501Amp Kit - Monoblock Tube Amplifier
Tube designs rival the sound of high end audio amplifiers that cost 10 times as much! This kit was designed by George Fathauer. Enjoy the thrill of high end audio without going broke and enjoy the satisfaction in building it yourself. Kit come complete will all parts and easy to follow instructions.
Uses 11MS8 Power tubes included with the kit. Also includes board for mounting PC board and transformers.
Input Impedance: 100K ohms
Output Impedance: 8 ohms
Power Output: 8 watts per channel
Frequency Response: 20 to 20,000 Hz
Minimum Input for Full Output: 0.3 V
Total Harmonic Distortion @ 1 W:
$124.95
$109.96
You save: 12%
Click to read more

Pages

(15 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Holiday Gifts