Jacks & Plugs

3.5mm TRS jacks with a switched tip found in many DIY Eurorack projects. These Qingpu Electronics jacks can be panel mounted with wires or more commonly PCB mounted. The PJ3410 jacks can be used for both mono and stereo signals. Hardware sold separately. See accessory items below.

M12 x1.0 threading. Nut and washer set for panel-mounting jacks.

Vintage style speaker cable. ¼" plug to (2) spade lugs. Perfect replacement for vintage guitar amps where the speaker plugs directly into the chassis. 34" total length.

Solder terminals, switched. Metal ferrule, vintage style.
Features:

• Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability
• Tough, molded grade 1 black Nylon body.
• Made in the U.K.
• Supplied with a metal hexagonal mounting nut
• Designed to receive both mono and stereo 1/4" jack plugs

Withstand Voltage: 2000VDC Min. Maximum Current: 5A Temperature Rating: -10°C ~ +70°C Life (Minimum): 10,000+ Operations Nominal Contact Resistance: < 50 mΩ

Gold, black/red/white band, front mount female RCA phono jack. Multiple color options available.

The Plug and Play eliminates the confusing switch found on most stereo cabinets. Just pick your impedance and plug in. Label is set at the common 4/16 Ohm Mono and 8 Ohm Stereo. Ready to install with a steel dish, wires, and speaker connectors.

Solder terminals, switched. Used in modern Marshall amps. Features: Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability, tough, molded grade 1 black Nylon body.

Switchcraft Type 12A Littel-Jax shorting type phone jack. The switched terminal is normally closed and is usually connected to ground to eliminate hum when unplugged. Mono 2-conductor. Mates with standard ¼" plugs and is available with standard or long bushings. Includes nut and washer

Switchcraft Type 280. ¼” straight plug with solder lugs and cable clamp. Switchcraft Heavy duty machined copper alloy handle, tip and body for unsurpassed ruggedness

Switchcraft Type 11 Little-Jax phone jack. Mono 2-conductor, open circuit. Mates with standard ¼" plugs and is available with standard or long bushings. Great replacement for Fender® guitar & amp input jacks.

Pure Tone has developed a high quality 1/4" two pole (mono) jack using a new patented design that improves upon and offers a more reliable connection than standard 1/4" jacks. The Pure Tone design features two springs per pole that secure the plug into place and create a 100% greater surface area connection at all contact points to improve stability and signal integrity. These jacks also increase the current capability of 1/4" connections.

• Recessed steel cup
• Designed for use with 1/4" jacks
• Steel design
• 3 mounting holes

Input Jack. PC board terminals, switched. Used in modern Marshall amps, or as a replacement part for Marshall JCM 900 cabinets and more. See S-H955-X for white version.

• Deluxe for standard .080" tip plug.
• Machined contact with turret terminal
• Hex socket head .188 for ease in mounting
• Closed entry blocks access of probes greater than 0.085
• Nylon UL approved for self extinquishing
• Brass body
• Silver finish

• Contact: Brass with wrap around beryllium copper spring
• Finish: Silver
• Body: Nylon
• Hardware: Nickel-plated nut
• Body thread stripping torque: 0.4lb. in
• Panel thickness: Up to 0.437
• Current Rating: 10 A
• Breakdown voltage: 5700 Vrms min
• Contact resistance: 0.010 ohms max
• Contact to panel C: 2 pF nominal

Fender® Style ¼" Mono Input Jack with 4 PCB Terminals.

Switchcraft ¼" Mono 2-conductor cable-mount plug. Flat shielded handle with solder terminals. Type 228. Used in Fender amps for speaker connections. Also perfect for close quarters pedal-to-pedal connections. Includes hardware

Fender® Style replacement ¼" stereo input jack that has 9 PCB mount terminals.

Switchcraft ¼" Right Angle Plug (Type 226) Good for tight spaces Large terminals accept up to 16 AWG wiring (cables up to 0.25" diameter) All Metal exterior

Avoid loose output jacks with this jack mount for Telecaster guitars. Includes two angled screws that ensure that the jack will be held tightly in place. Multiple color options available.

• Capable of being screwed directly onto switchcraft jacks

PC terminals, switched. Metal ferrule, vintage style.

Type 152B. ¼" Female Stereo Input Jack 3-conductor. Thick panel-mount jack with cable clamp. Brass finish.

½" panel mount DC jack with solder lugs. This jack is rear mounted which makes troubleshooting and repairs simpler since the jack does not need to be desoldered if the circuit needs to be removed from the enclosure. Round plastic with normally closed switch. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Three solder lugs are available for tip, ring, and switch.

Accepts standard banana plug, test and phone tip plugs, spade lugs, alligator clips, and bare wire. One plug per package. Gold plated. Multiple color options available.

Low profile DC jack with solder lugs. This jack is the perfect size for smaller builds where additional space is necessary. The low profile DC jack is also great for builds where aesthetics are a priority. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Features two solder lugs for tip and ring.