You are here

Jacks & Plugs

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(3 pages)
W-AM-TM1RBJPlug - Amphenol, ¼", Right Angle, Switched, black nickel

Amphenol right-angle ¼” mono SwitchPlug with black finish and large jaws cable clamp (used for cable OD 5.5mm to 6.5 mm). The Amphenol T series SwitchPlug uses a unique 360 degree precision sliding helical spring contact design to quietly and accurately switch the signal circuit safely to ground during instrument changes under load, thereby avoiding annoying thumps, pops and squeals. The sliding ring contact self-cleans every time the plug is connected preventing excessive build up of oxidization and contamination. Activation is directly off the jacks full front face assuring a positive reference point every time, and as it works instantaneously on the main circuits there is no need for the use of magnets or other elaborate switching mechanisms. WARNING! For use with instrument (guitar) applications only


$9.95
$8.96
You save: 10%
Click to read more about this product.
W-AM-AC3F3FWXLR Adapter - Amphenol, 3-Pole Female To Female
XLR 3 pole female to 3 pole female adapter, pre-wired, metal shell. Nickel.
Features:
  • Adapter pre-wired for convenience
  • 120 ohm terminators
$7.95
$7.16
You save: 10%
Click to read more about this product.
W-AM-AC3F3MWXLR Adapter - Amphenol, 3-Pole Female To Male
XLR 3 pole female to 3 pole female adapter, pre-wired, metal shell. Nickel.
Features:
  • Adapter pre-wired for convenience
  • 120 ohm terminators
$7.85
$7.07
You save: 10%
Click to read more about this product.
W-AM-AC3M3MWXLR Adapter - Amphenol, 3-Pole Male To Male
XLR 3 pole male to 3 pole male adapter, pre-wired, metal shell. Nickel.
Features:
  • Adapter pre-wired for convenience
  • 120 ohm terminators
$6.50
$5.85
You save: 10%
Click to read more about this product.
W-AM-JM2PPlug - Amphenol, ¼", Mono, Jumbo, Thermoplastic, Satin

1/4" JUMBO mono plug, thermoplastic backshell, satin finish. Features:



  • Cable O.D. 7.5mm to 10.5mm (0.295" to 0.413")
  • Stylised Shell design with ergonomic grip
  • Robust diecast shell
  • Great solderability with increased solder area
  • Precision machined contacts
  • Quick and easy assembly
  • Nickel contact-plating

$5.50
$4.95
You save: 10%
Click to read more about this product.
W-AM-TM2RJPlug - Amphenol, ¼", Mono, Right Angle, Nickel

1/4” mono phone plug, right angle, standard Jaws cable clamp, thermoplastic backshell, satin finish.


$4.50
$4.05
You save: 10%
Click to read more about this product.
W-AM-TM2PNJPlug - Amphenol, ¼", Mono, Nickel

1/4” mono straight phone plug, large Jaws cable clamp, metal backshell, black finish.


$4.50
$4.05
You save: 10%
Click to read more about this product.
W-AM-AX3MB-AUXLR Plug - Amphenol, 3-Pole, Black, Gold-Plated
Amphenol AX series XLR cable connector, 3 pole male, Machined gold-plated contacts, Black Finish
The revolutionary AX series of XLR connectors introduce an exciting contemporary look and feel to the professional audio interconnect market. They are designed to complement modern audio architecture and truly “fit" within their environment.
$4.20
$3.78
You save: 10%
Click to read more about this product.
W-AM-AX3FB-AUXLR Plug - Amphenol, Female, Black, Gold-Plated
XLR 3 pole female, stamped gold plated contacts, black finish.
Features:
  • Unique Australian designed shell and housing
  • Ergonomic stylish sleeve design for improved grip
  • Oversized latch lever preserves your thumb
  • Leading first mate last break pin 1 on socket connectors
  • Chuck style cable clamp to suit 3mm - 8mm (0.118" - 0.314") cable
  • Overmolded cable support boot
  • New socket contact design for improved contact resistance
  • Precision machined pin contacts
  • Compact 2.5mm (14AWG) solder buckets to reduce soldering time and
$4.15
$3.74
You save: 10%
Click to read more about this product.
W-AM-AC3MDZBXLR Jack - Amphenol, 3-Pole, Male, D Flange
Amphenol AC "Z" series XLR metal chassis mount connector. 3 pole male, D Flange, Stamped contacts, Black Finish.
The metal chassis mount "Z" series connectors are designed for the audio user where durability, reliability and strength across a wide range of applications are important. All AC products are manufactured to the highest quality standards and will withstand the harshest environments.
Note: A ground tag is standard on all AC "Z" series connectors. Although the ground tag is intended for RFI shielding applications, Amphenol cannot guarantee its effectiveness in all cases.
$3.95
$3.56
You save: 10%
Click to read more about this product.

Pages

(3 pages)
Subscribe to RSS - Jacks & Plugs