Jacks & Plugs

¼" Jack - Switchcraft, Mono, open circuit
Switchcraft Type 11 Little-Jax phone jack. Mono 2-conductor, open circuit. Mates with standard ¼" plugs and is available with standard or long bushings. Great replacement for Fender® guitar & amp input jacks.
Starting at $2.35
¼" Jack - Switchcraft, Mono, shunt tip
Switchcraft Type 12A Littel-Jax shorting type phone jack. The switched terminal is normally closed and is usually connected to ground to eliminate hum when unplugged. Mono 2-conductor. Mates with standard ¼" plugs and is available with standard or long bushings. Includes nut and washer
Starting at $2.75
¼" Jack - PC Mount, switched, mono
Mono input. PC mount terminals. Metal ferrule. Shorting. Similar to S-H901PC-X.
Starting at $1.45
¼" Plug - Switchcraft, cable-mount
Switchcraft Type 280. ¼” straight plug with solder lugs and cable clamp. Switchcraft Heavy duty machined copper alloy handle, tip and body for unsurpassed ruggedness
Starting at $3.65
¼" Jack - Cliff, Solder Lug, for Marshall, metal nut
Solder terminals, switched. Metal ferrule, vintage style.
Features:
  • Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability
  • Tough, molded grade 1 black Nylon body.
  • Made in the U.K.
  • Supplied with a metal hexagonal mounting nut
  • Designed to receive both mono and stereo 1/4" jack plugs

Withstand Voltage: 2000VDC Min. Maximum Current: 5A Temperature Rating: -10°C ~ +70°C Life (Minimum): 10,000+ Operations Nominal Contact Resistance: < 50 mΩ
Starting at $2.95
¼" Jack - Switchcraft, Stereo, double open circuit
Switchcraft Type 12B Littel-Jax stereo phone jack. Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing. Stereo 3-Conductor double open circuit (does not have switched terminal). Includes nut and washer.
$2.95
Power Jack - DC Panel Mount, 5.5mm External, 2.1mm Internal
Colors Available:
½" panel mount with solder lugs. Round plastic with normally closed switch. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter.
$0.99
¼" Jack - Lumberg, Low Profile, Mono, Open Circuit
Low profile mono jacks made by Lumberg. These high quality jacks are the perfect size for tightly packed pedal enclosures. The premium look, feel, and construction make Lumberg jacks an excellent choice for any build.
  • M9*0.75 Bushing Thread
  • Mono 2-Conductor
  • Open Circuit (does not have switched terminal).
  • Includes nut and washer.
$1.95
3.5mm Jack - Qingpu, Eurorack, Mono, Switched Tip, PC Mount
PCB mounted 3.5mm mono jacks commonly found in DIY Eurorack projects. These are the newest version from Qingpu Electronics featuring a square bushing plate for added durability. Hardware sold separately. See accessory items below.
$0.45
Nut - Hex, for mounting Qingpu 3.5mm jacks
Hex nut for W-QP-419GR and W-QP-518MA 3.5mm jacks. See W-QP-NUT-K for the knurled, slotted version of this nut. See W-QP-WASHER for compatible washer
$0.15
RCA Jack - Chassis Mount, Front Mount, Gold Plated
Colors Available:
Gold, black/red/white band, front mount female RCA phono jack. Multiple color options available.
$2.85
¼" Jack - Pure Tone, Mono, Open Circuit
Colors Available:
Pure Tone has developed a high quality 1/4" two pole (mono) jack using a new patented design that improves upon and offers a more reliable connection than standard 1/4" jacks. The Pure Tone design features two springs per pole that secure the plug into place and create a 100% greater surface area connection at all contact points to improve stability and signal integrity. These jacks also increase the current capability of 1/4" connections.
Starting at $4.25
RCA Jack - Switchcraft, Rear panel-mount, natural-insulator
Switchcraft RCA/phono rear panel-mount jack. Natural insulator. Good replacement for Fender. Mounts in a 3/8" hole.
$2.95
Power Jack - Lumberg, DC Panel Mount, Low Profile, 5.5mm External, 2.1mm Internal
Low profile Lumberg panel mount barrel jack with solder lugs. This high quality jack is the perfect size for smaller builds where additional space is necessary. The Lumberg low profile DC jack is also great for builds where aesthetics are a priority. For use with barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Mounting nut included.
Note: As of 2023, Lumberg has updated the design of these jacks.
$1.55
¼" Plug - Switchcraft, cable-mount, right-angle
Switchcraft ¼" Right Angle Plug (Type 226) Good for tight spaces Large terminals accept up to 16 AWG wiring (cables up to 0.25" diameter) All Metal exterior
Starting at $6.25
¼" Jack - Cliff, solder lugs, switched
Solder terminals, switched. Used in modern Marshall amps. Features: Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability, tough, molded grade 1 black Nylon body.
Starting at $2.75
¼" Jack - Rean, Mono, Open Circuit
2 pole open 1/4" jack, 2 contacts, with washer and nut, panel thickness 3.5 mm, with 0.205" faston tabs
Starting at $1.45
RCA Plug - Switchcraft, straight, 2-conductor, type 3501MX
Switchcraft 2 conductor RCA straight plug, accomodates cable up to 0.125" (3.18mm) diameter, no handle. Switchcraft’s® straight RCA plugs feature an easy-to-assemble construction: a handle and plug assembly. The plug features a solid-pin design and large solder terminals that make termination faster and easier. This new RCA plug will save time and space in any application.
$0.95
Washer - Flat, for use on Qingpu Jacks
Flat washer for W-QP-419GR and W-QP-518MA 3.5mm jacks.
$0.17
¼" Jack - Solder Lugs, switched, shorting
Mono input. Solder lugs, shorting. Metal ferrule, vintage style. Similar to S-H901-X.
$2.20
Power Jack - Lumberg, DC Panel Mount, 5.5mm External, 2.1mm Internal
Lumberg panel mount barrel jack with solder lugs.This DC jack features a normally closed switch on the ring (sleeve) connection. For use with barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Mounting nut included.
$1.35
¼" Jack - Open Circuit, Made in Taiwan
¼" female. Open circuit. Replacement for Fender®. Made in Taiwan.
$1.55
¼" Jack - Stereo, Panel Mount, Low Profile
Panel mount stereo jacks with a very low profile. These jacks have a smaller footprint than the Lumberg jacks that are popular for tight pedal builds. They are perfect for top mounted jack pedal builds and any other project where space is limited. Mounting nut and flat washer included.
  • M9*0.75 Bushing Thread
  • Stereo 3-Conductor (TRS)
  • Open Circuit (does not have switched terminal).
  • Includes nut and washer.
$0.99
¼" Jack - Cliff, PC Mount, switched, black
Input Jack. PC board terminals, switched. Used in modern Marshall amps, or as a replacement part for Marshall JCM 900 cabinets and more. See S-H955-X for white version.
$2.95