Jacks & Plugs

¼" Jack - Cliff, PC Mount, for Marshall, metal nut
PC terminals, switched. Metal ferrule, vintage style.
Starting at $2.69
¼" Plug - Switchcraft, flat cable-mount, right-angle
Switchcraft ¼" Mono 2-conductor cable-mount plug. Flat shielded handle with solder terminals. Type 228. Used in Fender amps for speaker connections. Also perfect for close quarters pedal-to-pedal connections. Includes hardware
Starting at $4.95
Cable - vintage-style, ¼" to 2 Spade Lugs, 34" long
Vintage style speaker cable. ¼" plug to (2) spade lugs. Perfect replacement for vintage guitar amps where the speaker plugs directly into the chassis. 34" total length.
$4.95
¼" Jack - Mono, PC Mount, for Fender® Amps '88 - '99
Fender® Style ¼" Mono Input Jack with 4 PCB Terminals.
$1.95
¼" Jack - Rean, Mono, Open Circuit
2 pole open 1/4" jack, 2 contacts, with washer and nut, panel thickness 3.5 mm, with 0.205" faston tabs
Starting at $1.29
¼" Jack - Stereo, PC Mount, for Fender® Amps '88 - '99
Fender® Style replacement ¼" stereo input jack that has 9 PCB mount terminals.
$2.35
Tip Jack - Insulated Deluxe, panel mount
Colors Available:
  • Deluxe for standard .080" tip plug.
  • Machined contact with turret terminal
  • Hex socket head .188 for ease in mounting
  • Closed entry blocks access of probes greater than 0.085
  • Nylon UL approved for self extinquishing
  • Brass body
  • Silver finish
  • Contact: Brass with wrap around beryllium copper spring
  • Finish: Silver
  • Body: Nylon
  • Hardware: Nickel-plated nut
  • Body thread stripping torque: 0.4lb. in
  • Panel thickness: Up to 0.437
  • Current Rating: 10 A
  • Breakdown voltage: 5700 Vrms min
  • Contact resistance: 0.010 ohms max
  • Contact to panel C: 2 pF nominal
$1.75
Binding Post - Dual, Gold-Plated, for banana plugs
Dual, gold plated binding post.
  • Red and black posts
  • Accepts either single or dual banana plugs
  • Mounts in two ½" holes on ¾" centers, panel thickness up to ¼"
  • 15A rating
  • Gold plated contacts.
$6.25
¼" Jack - Switchcraft, Stereo, double open circuit, deep panel
Type 152B. ¼" Female Stereo Input Jack 3-conductor. Thick panel-mount jack with cable clamp. Brass finish.
$7.95
Power Jack - Lumberg, DC Panel Mount, Low Profile, 5.5mm External, 2.1mm Internal
Low profile Lumberg panel mount barrel jack with solder lugs. This high quality jack is the perfect size for smaller builds where additional space is necessary. The Lumberg low profile DC jack is also great for builds where aesthetics are a priority. For use with barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Mounting nut included.
$1.25
3.5mm Jack - Qingpu, Eurorack, Stereo, PC Mount
PCB mounted 3.5mm stereo jacks commonly found in DIY Eurorack projects. These are the newest version from Qingpu Electronics featuring a square bushing plate for added durability. Hardware sold separately. See accessory items below.
$0.45
XLR Adapter - Amphenol, Male To Male, Nickel
XLR 3 pole male to 3 pole male adapter, pre-wired, metal shell. Nickel. Features:
  • Adapter pre-wired for convenience
  • 120 ohm terminators
$8.95
¼" Jack - Mono, Switched Tip, made in Taiwan.
¼" female mono TS jack, shorting type, made in Taiwan.
$1.55
RCA Jack - Chassis Mount, Rear Mount, Gold Plated
Colors Available:
Black/red/white band female chassis mount jacks. Sold individually, back panel mount.
Starting at $2.50
Banana Jack - Johnson Cinch, For 4mm Plugs, Panel Mount
Colors Available:
High quality banana jacks with tinned brass contacts and strong nylon housings. These jacks come in a wide variety of colors and work well with any 4mm banana plug. Cinch Johnson banana jacks are used in test equipment, audio equipment, as well as modular synthesizers such as DIY Buchla, Serge, and others. Features:
  • Formed brass contacts
  • Bright tin finish
  • Durable nylon 6/6 body
  • Nickel plated nut
  • 0.010Ω maximum contact resistance
  • Keyed mounting with two flatted sides
Starting at $0.95
Power Jack - DC Panel Mount, Rear Mount, 5.5mm External, 2.1mm Internal
½" panel mount DC jack with solder lugs. This jack is rear mounted which makes troubleshooting and repairs simpler since the jack does not need to be desoldered if the circuit needs to be removed from the enclosure. Round plastic with normally closed switch. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Three solder lugs are available for tip, ring, and switch.
$0.59
Nut - Cliff, Hex, Red, used on Loudspeaker Output Jacks
Red Cliff hex nut, often used on guitar amplifiers to identify loudspeaker outputs.
$0.75
Jack Plate - for Telecaster guitars
Colors Available:
Avoid loose output jacks with this jack mount for Telecaster guitars. Includes two angled screws that ensure that the jack will be held tightly in place. Multiple color options available.
  • Capable of being screwed directly onto switchcraft jacks
$5.00
Power Jack - DC Panel Mount, Low Profile, 5.5mm External, 2.1mm Internal
Low profile DC jack with solder lugs. This jack is the perfect size for smaller builds where additional space is necessary. The low profile DC jack is also great for builds where aesthetics are a priority. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Features two solder lugs for tip and ring.
$0.59
¼" Jack - Cliff, PC Mount, L-Leg
Input jack, 4 PC board terminals, switched, L-leg mounting. Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability.
Starting at $2.79
Bezel - Cliff, Black for S4 Jack Socket
Genuine Cliff™ replacement bezel for S4 Series jacks. These can be used with any of our Cliff™ jacks using the metal ferrule style nut. Sold individually.
$0.20
¼" Jack - Lumberg, Low Profile, Stereo, Double Open Circuit
Low profile stereo jacks made by Lumberg. These high quality jacks are the perfect size for tightly packed pedal enclosures. The premium look, feel, and construction make Lumberg jacks an excellent choice for any build.
  • M9*0.75 Bushing Thread
  • Stereo 3-Conductor
  • Double Open Circuit (does not have switched terminal).
  • Includes nut and washer.
$1.79
¼" Jack - Switchcraft, Enclosed, Mono, Shunt Tip
The Switchcraft Type 112A enclosed ¼” jack is a high quality jack featuring a switched tip. This jack has three solder lugs. One for the tip, one for the sleeve, and one for the switch which connects to the tip when no plug is inserted. These jacks have been widely used across the industry and can also be found in many popular 5U synthesizers. Includes nut and washer
  • Type 112AX
  • 0.276" bushing length (standard)
  • Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing.
  • Mono 2-Conductor
  • Includes nut and washer
  • Tip is shunt
$2.39
¼" Plug - G&H, Mono, Nickel, Copper Core
Made by G&H industries. High quality, oxygen-free copper core phone plugs. Made in the USA. 1/2 inch body diameter for instrument and smaller wire speaker applications. Features:
  • Shielded handle
  • Large cable clamp
  • Independent ground
  • Copper-core construction
$2.95