Jacks & Plugs

The Switchcraft 380 ¼” two-conductor (mono) plug. The 380 has a shorter handle than standard ¼” plugs making it a great option when a lower profile is needed such as on pedalboards or use with rack equipment. Specifications

• Sleeve, Tip and Body: Nickel-plated copper alloy.
• Terminals: Solder lug - Tinned copper alloy.
• Screw: Tin-plated (screws size 3-48).
• Handles: Nickel-plated copper alloy. Tubular insulator inside handle.

This modern cupstyle Tele® jackplate is milled from brass and has a shiny plated finish. Mounts with (2) screws that are included. No more having to deal with that sharp piece of steel used to secure the old original cups. Super easy to install! The cup is even threaded so no need for the lockwasher and nut from the jack. Just simply screw the jack into the cup, solder the wires and install into your instrument!

Switchcraft RCA/phono rear panel-mount jack with a natural insulator. Materials:

• Housing: Nickel or Gold-plated Brass
• Contact: Nickel-plated Brass
• Insulator: ABS
• Hardware: Nickel-plated Brass

For the rear mount version, see W-SC-3501FR.

Switchcraft Type 13E phono jack. Mono 2-conductor isolated break circuit. Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing. Includes nut and washer.

Switchcraft 2 conductor shielded RCA straight plug, solid pin, accommodates cable up to 0.290" (7.366mm) diameter, solder cup on center. Long handle & cable clamp, Nickel Handle, Nickel Plug

Low profile stereo jacks made by Lumberg. These high quality jacks are the perfect size for tightly packed pedal enclosures. The premium look, feel, and construction make Lumberg jacks an excellent choice for any build.

• M9*0.75 Bushing Thread
• Stereo 3-Conductor
• Double Open Circuit (does not have switched terminal).
• Includes nut and washer.

Pure Tone has developed a high quality 1/4" three pole (stereo) jack using a new patented design that improves upon and offers a more reliable connection than standard 1/4" jacks. The Pure Tone design features two springs for both the tip connection, a spring for the ring, and an additional spring for the shield connection. These help to secure the plug into place and create a greater surface area connection at contact points to improve stability and signal integrity. These jacks also increase the current capability of 1/4" connections.

Pure Tone’s new long threaded three pole (stereo) 1/4" jack provides full contact for improved connections and signal integrity. This jack locks the cable securely into place creating a greater surface area connection to carry more signal for an improved frequency stability. This jack is a great choice for both mono and stereo applications as well as guitars using active electronics.

Switchable stereo/mono jack plate for back of cabinets.

Mono input jack. 4 solder terminals, switched. Used in modern Marshall amps.

Switchcraft shouldered hex nuts for ⅜”-32 UNEF-2A threaded bushings. These nuts include a rubber grommet for use in sealed systems and also add a unique look to any build such as pedals or amplifiers. The large nut (W-SC-DRESS-1) is intended for panel or chassis thicknesses of 0.05” through 0.09”. The small nut (W-SC-DRESS-2) is intended for panel or chassis thicknesses of 0.095” through 0.125”. Rubber grommet included.

• Withstand voltage: 2000V DC Minimum
• Maximum current: 5A
• Temperature rating: -10°C - 70°C
• Life (minimum): 10,000+ operations
• Nominal contact resistance:

Cable for connecting 9V batteries to pedals via their DC input jack. This cable is great for using batteries with pedals that don’t have a battery compartment or for quickly switching from a power supply to a battery. This cable is 3 ¼” inches in length. The barrel plug has a 5.5mm outer diameter and 2.1mm inner diameter. Battery not included.

1/4" stereo jack. 4 PC mount terminals include: tip, tip-shunt (normally closed), ring and sleeve. Metric threading: M12 x 1.0.

1/4" Mono 2 Conductor Jack, Transfer Circuit. Used in Fender, part number: 004-1701-000. Includes nut and washer.

Genuine Marshall SKTP-00004 jack. This 9 pin jack is used as the return jack of the effects loop of some Marshall amps such as the JCM2000. Nut and washer are not included with this jack.The bushing is M12 x1.0 thread. For send jack, see S-H563

M12 x1.0 threading. Nut and washer set for panel-mounting jacks.

Peavey TRS jack with a switched tip and switched ring connection. Stereo HID (High Definition), insulated. Please note that this does not include nuts or washers. Please see parts S-HRVNT, S-HRVLW, and R-VNUT-38 if you require them.

Stereo jack for Dunlop effects pedals. Original Dunlop replacement part. Though hole PCB mount with six pins.

Snap-in Lumberg panel mount barrel jack with solder lugs. This high quality jack is a similar size to the Lumberg low profile jack but easily snaps into place with no need to thread a nut inside the chassis. For use with barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter.

1/4" Mono phone plug. Features a stylised shell design, robust diecast shell, great solderability, flexible grommet cable protection and quick and easy assembly

Switchcraft 1/4" stereo jack, 4 solder lugs include: tip, tip-shunt, ring and sleeve.

Accepts standard banana plug, test and phone tip plugs, spade lugs, alligator clips, and bare wire. One plug per package. Gold plated. Multiple color options available.

Dual, gold plated binding post.

• Red and black posts
• Accepts either single or dual banana plugs
• Mounts in two ½" holes on ¾" centers, panel thickness up to ¼"
• 15A rating
• Gold plated contacts.