Jacks & Plugs

¼" Plug - G&H, Mono, Jumbo, Nickel, Copper Core
Made by G&H industries. High quality, oxygen-free copper core phone plugs. Made in America. For large wire, 8-12 gauge speaker cable.
$7.25
¼" Jack - Peavey, Mono, non-insulated
2 tip HID (High Definition), non-insulated, metal bushing. Please note that this does not include nuts or washers. Please see parts S-HRVNT S-HRVLW, and R-VNUT-38 if you require them.
$4.25
Power Jack - Cliff, DC Panel Mount, Low Profile, 5.5mm External, 2.1mm Internal
Colors Available:
High quality PCB mounted DC jack made by Cliff. This style of PCB mounted DC jack style can be found on many manufacturers’ pedals. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Three solder pins are available for tip, ring, and switch.
Starting at $1.79
¼" Jack - Stereo, PC Mount, Switched
1/4" stereo jack. 4 PC mount terminals include: tip, tip-shunt (normally closed), ring and sleeve. Metric threading: M12 x 1.0.
$2.50
Speaker Twist Jack - Neutrik, speakON, 4-pole, panel mount
4 pole chassis connector, black D-size flange, countersunk thru holes, 3/16" flat tabs. Mates with W-SO-P42 The speakON panel mount connectors are the standard chassis connectors for loudspeaker / amplifier interconnections. They feature a unique metal locking system, making contact only once fully locked. The speakON receptacles are robust, versatile and easy to terminate. Features:
  • Current rating 30 A rms
  • Glass reinforced materials make it extremely robust and dependable
  • Precise keyway for secure mating
  • Accurate twist lock latching system
  • Metal insert in locking area
  • Airtight design - optimized for speaker applications
$3.90
Binding Post - Dual, Gold-Plated, for banana plugs
Dual, gold plated binding post.
  • Red and black posts
  • Accepts either single or dual banana plugs
  • Mounts in two ½" holes on ¾" centers, panel thickness up to ¼"
  • 15A rating
  • Gold plated contacts.
$6.30
¼" Jack - Fender®, Mono, PC Mount, Closed Circuit
PCB mount Fender original mono jack. Closed circuit.
$5.75
¼" Jack - Rean, horizontal, switched, PC mount
Horizontal 1/4" jack, all contacts switched, chrome ferrule nut
Starting at $1.20
Cable - Battery to 2.1mm DC Plug, Center Negative
Cable for connecting 9V batteries to pedals via their DC input jack. This cable is great for using batteries with pedals that don’t have a battery compartment or for quickly switching from a power supply to a battery. This cable is 3 ¼” inches in length. The barrel plug has a 5.5mm outer diameter and 2.1mm inner diameter. Battery not included.
$1.30
¼" Jack - Stereo, replacement for Fender Amps 1999 - Present
R/A stereo jack. Replacement for Fender amps 1999-present. Similar to Fender part: 005-3450-000
$2.15
Jack Plate - Marshall, Switchable Stereo / Mono
Switchable stereo/mono jack plate for back of cabinets.
$45.85
3.5mm Plug - Rean, cable mount, nickel-plated brass
High quality 3.5mm (1/8") plug. Features nickel plated brass contacts, with a nickel plated zinc shell. This plug uses a crimp strain relief for use with 4 mm O.D cables.
Starting at $1.15
¼" Jack - Stereo, Switched Tip, for Peavey, Insulated
Peavey TRS jack with a switched tip connection. Stereo HID (High Definition), insulated, plastic bushing.
$2.99
Bezel / Nut - Cliff, For S4, Combined Nut / Bezel, Black
Genuine Cliff™ replacement combination nut/bezel for S4 Series jacks.
  • 3/8” thread diameter/20 TPI
  • 3/16” thread length
  • 7/16” nut
  • Used on many Marshall amps
  • Matte black finish
  • Sold individually.
$0.45
¼" Jack - Switchcraft, Stereo, shunt tip
Switchcraft 1/4" stereo jack, 4 solder lugs include: tip, tip-shunt, ring and sleeve.
$5.75
XLR Plug - Switchcraft, premium, cable-mount
Switchcraft XLR 3-Pin Cable Mount Plug (Type A3F) Nickel body. Silver contacts. Latchlock. The original A Series premium XLR connector with adjustable dual pressure plate cable clamp, flexible strain relief, and removable pin insert. Cable-mount with silver pins. Nickel. Provides secure cable lock and strain relief for all standard size cables. Specifications Construction Sturdy, die-cast zinc with satin nickel finish to withstand hard use - even abuse. Insert Insulation High-impact, molded thermoplastic provides high dielectric strength, and superior insulation resistance. Locking Latchlock on female plugs and receptacles locks into groove in mating male connector to prevent accidental disconnect.
Starting at $5.45
¼" Jack - Peavey, Stereo, Switched Tip & Ring, Insulated
Peavey TRS jack with a switched tip and switched ring connection. Stereo HID (High Definition), insulated. Please note that this does not include nuts or washers. Please see parts S-HRVNT, S-HRVLW, and R-VNUT-38 if you require them.
$4.65
¼" Jack - Dunlop, Stereo, for effects pedals
Stereo jack for Dunlop effects pedals. Original Dunlop replacement part. Though hole PCB mount with six pins.
$3.40
¼" Jack - Marshall, PC Mount, 5 Pin, Effects Loop Send
Genuine Marshall SKTP-00005 jack. This 5 pin jack is used as the send jack of the effects loop of some Marshall amps such as the JCM2000. Nut and washer are not included with this jack. The bushing is M12 x1.0 thread.
For return jack, see S-H562
$4.00
Out of Stock
¼" Jack - Rean, Stereo, Horizontal, Switched, Plastic Nut, PC
3 pole horizontal 1/4" jack, all contacts switched, gold plated contacts, plastic housing with nut and washer
$1.35
Nut - Switchcraft, Dress Nut / Sealing Nut, ⅜”-32 UNEF-2A
Switchcraft shouldered hex nuts for ⅜”-32 UNEF-2A threaded bushings. These nuts include a rubber grommet for use in sealed systems and also add a unique look to any build such as pedals or amplifiers. The large nut (W-SC-DRESS-1) is intended for panel or chassis thicknesses of 0.05” through 0.09”. The small nut (W-SC-DRESS-2) is intended for panel or chassis thicknesses of 0.095” through 0.125”. Rubber grommet included.
Starting at $2.49
Nut - Dress Nut, Slotted, ⅜”-32 UNEF, for Jacks & Pots
Slotted dress nut for ⅜”-32 threaded bushing such as standard Switchcraft ¼” jacks and CTS potentiometers. These plated brass nuts add a sleek look to any amplifier, pedal or guitar. This style of nut has a similar look to slotted round nuts found on plexi Marshall amps.
$2.95
Jack Plate - Fits Les Paul, Plastic
Colors Available:
Generic plastic jack plate. Fits Les Paul and other guitars. Mount the guitar's output jack in the ⅜" hole in the center of the jack plate.
$1.95
Jack Plate - Marshall, for Input Jack On Speaker Cabs, Plastic
Plastic jack cup for input jack on speaker cabinets.
  • Diameter = 3 3/4''
  • Center to Center Screw Hole Spacing Distance = 2 1/8''
$7.15
Out of Stock