Jacks & Plugs

1/4" professional right-angle phone plug, nickel contacts, nickel shell The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip. The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.

1/4" professional phone plug, nickel contacts, nickel shell The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip. The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.

High quality 3.5mm (1/8") plug. Features nickel plated brass contacts, with a nickel plated zinc shell. This plug uses a crimp strain relief for use with 4 mm O.D cables.

Black PCB mounted 3.5mm mono jacks commonly found in DIY Eurorack projects. These jacks feature black hardware with a matching black nut. They also use a square bushing plate for added durability. Mounting nut is included.

High quality PCB mounted DC jack made by Cliff. This style of PCB mounted DC jack style can be found on many manufacturers’ pedals. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Three solder pins are available for tip, ring, and switch.

Receptacle for panel or chassis mounting. Flange has two .136" (3.45 mm) diameter countersunk holes for #5-40 flat head mounting screws (not supplied). Mounts from front of panel or chassis in .953" (24.21 mm) diameter. Standard latchlock;

4 pole cable connector, chuck type strain relief. Mates with W-SO-J41 The industry-standard for loudspeaker connections offer extremely reliable and robust cable connectors with a reliable locking system. They feature solid contacts with screw-type terminals including a stranded wire protection which offer also solder termination. Features:

• Current rating 40 A continuous, 50 A audio signal with 50% duty cycle
• Only 3 parts, easy to assemble
• High impact materials – long-lasting and reliable
• Easy and extremely precise locking system "Quick Lock"
• 1 piece strain relief, chuck for 6 to 10 mm cable O.D.
• Improved grip on latch

XLR 3 pole female, stamped contacts, nickel finish. Features:

• Unique Australian designed shell and housing.
• Ergonomic stylish sleeve design for improved grip.
• Oversized latch lever preserves your thumb.
• Leading first mate last break pin 1 on socket connectors.
• Chuck style cable clamp to suit 3mm - 8mm (0.118" - 0.314") cable.
• Overmolded cable support boot.
• New socket contact design for improved contact resistance.
• Precision machined pin contacts as standard.
• Compact 2.5mm (14AWG) solder buckets to reduce soldering

XLR 3 pole male, stamped contacts, nickel finish, jaws cable clamp. Features:

• Zinc Diecast Shell
• Solder Bucket connections
• "Jaws" Cable Retention System
• Leading first mate last break socket contact
• Quick and easy assembly without screws
• Precision machined contacts

High quality made in USA ¼” plugs from Lava Cable. This right angle plug features an ultra low profile and a unique soldered connection that provides a quicker assembly than standard soldered connectors. The insulation system used in the plugs ensures a solid connection that is nearly impossible to short. Lava Soldered Right Angle Connectors are the smallest profile soldered plugs on the market today at only .405” in width and .515” in outer diameter. Soldering is easy with just one small solder point. Included insulators prevent shorting. To assemble:

• Strip 0.75” of the outside jacket from the end of the instrument cable.
• Feed the stripped end including the shield braid through the large black plastic insulator tube.

Switchcraft Type 188 Jumbo Plug. ¼" Mono 2 Conductor Heavy Duty Cable Mount Plug - Nickel Finish.

XLR 3 pole female, stamped contacts, large jaws cable clamp.

1/4" Stereo Phone plug, Diecast Shell, Satin finish, Flexible grommet. Features:

• Stylised Shell design
• Robust diecast shell
• Great solderability with increased solder area
• Precision machined contacts
• Flexible grommet cable protection
• Quick and easy assembly

C Series Circular Panel Mount 3 Pin XLR Female, mounts with #5 Screws (Not included) - Silver Pins / Nickel Finish.

Genuine Cliff™ replacement combination nut/bezel for S4 Series jacks.

• 3/8” thread diameter/20 TPI
• 3/16” thread length
• 7/16” nut
• Used on many Marshall amps
• Matte black finish
• Sold individually.

Stereo, insulated, plastic bushing, bushing length = 0.29". Please note that this does not include nuts or washers. Please see parts S-HRVNT, S-HRVLW, and R-VNUT-38 if you require them.

1/4" Mono phone plug, diecast shell, satin finish, flexible grommet. Features:

• Stylised Shell design
• Robust diecast shell
• Great solderability with increased solder area
• Precision machined contacts
• Flexible grommet cable protection
• Quick and easy assembly
• Large cable O.D. Entry to 8mm (0.315”)

Original Cliff UK right angle 1/4" mono plug. High quality with plastic screw on cover having a 0.31" diameter hole for inserting cable and snap-on back plastic cover allowing ease of access to tip solder lug. This Cliff jack plug is designed for use in many applications including audio, computer, military and industrial uses. The tip, ring, sleeve (TRS) connectors are manufactured from solid nickel plated brass with high temperature phenolic / PBT insulators. Features a cable clamp, which is an integral part of the ground screen contact and clamps firmly without damaging the cable.

Amphenol AC "Z" series XLR metal chassis mount connector. 3 pole female, D Flange, machined, black finish. The metal chassis mount "Z" series connectors are designed for the audio user where durability, reliability and strength across a wide range of applications are important. All AC products are manufactured to the highest quality standards and will withstand the harshest environments. Features

• The “D” size housing can be either front or rear mounted using the same panel cutout
• A leading first mate last break socket contact is standard on all female connectors (Pin 1)
• Solder cup
• Connectors are fitted with a grounding system for RFI shielding applications
• Compatible with all other XLR brands

Note: A ground tag is standard on all AC "Z" series connectors.

Plastic panel-mount male XLR jack from Amphenol with a vertical PCB mount. The AC series, A and B type XLR chassis receptacles have been designed and manufactured with the Original Equipment Manufacturers’ (OEM) needs in mind. The compact shell design allows a significant space saving over the traditional ‘D’ type shell. Gold plated contacts improve the performance, ensuring a reliable contact and the unique grounding link options offer flexibility in design. Features

• Vertical PCB mount
• Compatible with all other XLR brands
• Gold Contacts
• Precision Machined Pin contacts

Generic, one hole jack plate with a smooth black finish. Perfect for use as a jack plate on speaker cabinets. The jack mounting hole has a diameter of 0.43" and fits Cliff jacks with external threads perfectly (see S-H902). Center-To-Center mounting hole measurements are as follows:

• Horizontal- 3-9/16”
• Vertical- 3-3/16”

Replacement seal for S-H910 and S-H911 Cliff UK jacks.

12 ½" mm, stereo, insulated, PC mount, bushing length = 0.29".

1/4" professional phone plug, gold contacts, black shell The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip. The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.