Jacks & Plugs

¼" Jack - Stereo, PC Mount, Low Profile
PCB Mount stereo jacks with a very low profile. These jacks have a smaller footprint than the Lumberg jacks that are popular for tight pedal builds. They are perfect for top mounted jack pedal builds and any other project where space is limited. Mounting nut and flat washer included.
  • M9*0.75 Bushing Thread
  • Stereo 3-Conductor (TRS)
  • Open Circuit (does not have switched terminal).
  • Includes nut and washer.

This jack can be found in many modern versions of the classic Boss pedals such as the DS-1 and SD-1.
$1.05
Jack Plate - Single ¼", 2" Outside Diameter, Black Metal
Recessed steel cup designed for use with 1/4" jacks. Steel design with three mounting holes. Hardware is not included
$1.03
¼" Jack - Stereo, Panel Mount, Low Profile
Panel mount stereo jacks with a very low profile. These jacks have a smaller footprint than the Lumberg jacks that are popular for tight pedal builds. They are perfect for top mounted jack pedal builds and any other project where space is limited. Mounting nut and flat washer included.
  • M9*0.75 Bushing Thread
  • Stereo 3-Conductor (TRS)
  • Open Circuit (does not have switched terminal).
  • Includes nut and washer.
$0.99
¼" Jack - Rean, horizontal, switched, solder lugs
Horizontal 1/4" jack, all contacts switched, plastic housing with nut and washer, solder tap version
Starting at $0.99
Power Jack - DC Panel Mount, 5.5mm External, 2.1mm Internal
Colors Available:
½" panel mount with solder lugs. Round plastic with normally closed switch. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter.
$0.99
RCA Plug - Switchcraft, straight, 2-conductor, type 3501MX
Switchcraft 2 conductor RCA straight plug, accomodates cable up to 0.125" (3.18mm) diameter, no handle. Switchcraft’s® straight RCA plugs feature an easy-to-assemble construction: a handle and plug assembly. The plug features a solid-pin design and large solder terminals that make termination faster and easier. This new RCA plug will save time and space in any application.
$0.95
Nut - Cliff, Hex, for ¼" white Jacks
Hex nut for white Cliff Jacks, threading: 7/16-20. Also used on the footswitch jack in some Marshall amps.
$0.89
Nut - Cliff, Hex, Red, used on Loudspeaker Output Jacks
Red Cliff hex nut, often used on guitar amplifiers to identify loudspeaker outputs.
$0.89
Jack Seal - Cliff, for S-H910 and S-H911
Replacement seal for S-H910 and S-H911 Cliff UK jacks.
$0.85
3.5mm Jack - Black Hardware, Eurorack, Mono, Switched Tip, PC Mount
Black PCB mounted 3.5mm mono jacks commonly found in DIY Eurorack projects. These jacks feature black hardware with a matching black nut. They also use a square bushing plate for added durability. Mounting nut is included.
$0.85
Power Jack - DC Panel Mount, Low Profile, 5.5mm External, 2.1mm Internal
Low profile DC jack with solder lugs. This jack is the perfect size for smaller builds where additional space is necessary. The low profile DC jack is also great for builds where aesthetics are a priority. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Features two solder lugs for tip and ring.
$0.70
Dress Nut - Befaco, Bananuts, for 3.5mm Jacks
Colors Available:
Bananuts are anodized aluminum custom minijack nuts following Buchla/Serge coloring code: blue, purple, red, orange, yellow, white, green and black. These nuts are great for color-coding jacks or color-theming modules. Sold individually.
$0.69
Ferrule - for Cliff UK Jacks, Chrome
Ferrule for internal thread jacks, chrome (3/8-20).
$0.66
3.5mm Jack - Qingpu, Eurorack, TRS, Switched, Panel or PC Mount
3.5mm TRS jacks with a switched tip found in many DIY Eurorack projects. These Qingpu Electronics jacks can be panel mounted with wires or more commonly PCB mounted. The PJ3410 jacks can be used for both mono and stereo signals. Hardware sold separately. See accessory items below.
$0.65
Power Jack - DC Panel Mount, Vintage Boss Style, 5.5mm External, 2.1mm Internal
This DC power jack is similar to those used on vintage MIJ Boss pedals and others. This jack has a 2.1mm pin for use with 5.5mm barrel plugs. Three solder lugs are available for tip, ring, and switch.
$0.64
Power Jack - DC Panel Mount, Rear Mount, 5.5mm External, 2.1mm Internal
½" panel mount DC jack with solder lugs. This jack is rear mounted which makes troubleshooting and repairs simpler since the jack does not need to be desoldered if the circuit needs to be removed from the enclosure. Round plastic with normally closed switch. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Three solder lugs are available for tip, ring, and switch.
$0.64
Power Jack - DC PC Mount, 5.5mm External, 2.1mm Internal
This PCB mounted DC jack style can be found on many manufacturers’ pedals. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Three solder pins are available for tip, ring, and switch.
$0.64
3.5mm Jack - Qingpu, Eurorack, Stereo, PC Mount
PCB mounted 3.5mm stereo jacks commonly found in DIY Eurorack projects. These are the newest version from Qingpu Electronics featuring a square bushing plate for added durability. Hardware sold separately. See accessory items below.
$0.55
3.5mm Jack - Qingpu, Eurorack, Mono, Switched Tip, Snap-In, PCM
3.5mm TS jacks with a switched tip found in many DIY Eurorack projects. The WQP-WQP518MA-BM is the new improved version of the WQP-PJ301BM featuring Qingpu’s rugged square based bushing. The sleeve connection is through the outer bracket that snaps into place on the pcb allowing for easy construction and panel fitting. Hardware sold separately. See accessory items below.
$0.50
Ferrule - for Cliff UK Jacks, Black Plastic
Genuine Cliff ferrule for internal thread S4 jacks (3/8-20). This matte black ferrule works great with the S-H960-X washers to provide a unique look for inputs on amplifiers, pedals, and other equipment.
$0.45
Bezel / Nut - Cliff, For S4, Combined Nut / Bezel, Black
Genuine Cliff™ replacement combination nut/bezel for S4 Series jacks.
  • 3/8” thread diameter/20 TPI
  • 3/16” thread length
  • 7/16” nut
  • Used on many Marshall amps
  • Matte black finish
  • Sold individually.
$0.45
3.5mm Jack - Qingpu, Eurorack, Mono, Switched Tip, PC Mount
PCB mounted 3.5mm mono jacks commonly found in DIY Eurorack projects. These are the newest version from Qingpu Electronics featuring a square bushing plate for added durability. Hardware sold separately. See accessory items below.
$0.45
Lock Washer - Grounding, for S4 jack socket
EMI / RFI screen (grounding washer) for S2 and S4 Cliff jack sockets. This lock washer is added to S2/S4 Cliff jacks to provide a chassis/shield connection for the connection. Jacks sold separately.
$0.39
Bezel - Cliff, for S4 Jack Socket
Colors Available:
Genuine Cliff™ replacement bezel for S4 Series jacks. These can be used with any of our Cliff™ jacks using the metal ferrule style nut. Sold individually.
$0.35