Jacks & Plugs

• Withstand voltage: 2000V DC Minimum
• Maximum current: 5A
• Temperature rating: -10°C - 70°C
• Life (minimum): 10,000+ operations
• Nominal contact resistance:

Original replacement for Fender® amps. ¼" Stereo Input Jack that has 9 PCB mount terminals.

Amphenol AC "Z" series XLR metal chassis mount connector. 3 pole male, D Flange, Stamped contacts, Nickel finish. The metal chassis mount "Z" series connectors are designed for the audio user where durability, reliability and strength across a wide range of applications are important. All AC products are manufactured to the highest quality standards and will withstand the harshest environments. Note: A ground tag is standard on all AC "Z" series connectors. Although the ground tag is intended for RFI shielding applications, Amphenol cannot guarantee its effectiveness in all cases.

Lumberg panel mount barrel jack with solder lugs.This DC jack features a normally closed switch on the ring (sleeve) connection. For use with barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Mounting nut included.

Switchcraft ¼" Right Angle Plug (Type 226) Good for tight spaces Large terminals accept up to 16 AWG wiring (cables up to 0.25" diameter) All Metal exterior

Made by G&H industries. High quality, oxygen-free copper core phone plugs. Made in the USA. 1/2 inch body diameter for instrument and smaller wire speaker applications. Features:

• Shielded handle
• Large cable clamp
• Independent ground
• Copper-core construction

Solder terminals, switched. Used in modern Marshall amps. Features: Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability, tough, molded grade 1 black Nylon body.

This DC power jack is similar to those used on vintage MIJ Boss pedals and others. This jack has a 2.1mm pin for use with 5.5mm barrel plugs. Three solder lugs are available for tip, ring, and switch.

Mono or stereo jack plate for back of cabinets.

1/4" professional right-angle phone plug, nickel contacts, nickel shell The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip. The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.

High quality vintage-design ¼” plug from Switchcraft. This TS (mono) plug features an all metal handle (for .29 to .30 inch cable diameter), cable clamp and a heavy copper alloy-plated flex relief spring (for .265 inch cable diameter maximum).

2-pole 1/4" professional straight phone plug, gold contacts, black shell. Large jaw cable clamp for use with cable with an outer diameter of 5.5mm to 6.5mm.

Fender R/A 1/4" stereo jack. Used 1999-present. Hex nuts not included (S-H510), bushing length = 0.34".

Replacement seal for S-H910 and S-H911 Cliff UK jacks.

Switchcraft shouldered hex nuts for ⅜”-32 UNEF-2A threaded bushings. These nuts include a rubber grommet for use in sealed systems and also add a unique look to any build such as pedals or amplifiers. The large nut (W-SC-DRESS-1) is intended for panel or chassis thicknesses of 0.05” through 0.09”. The small nut (W-SC-DRESS-2) is intended for panel or chassis thicknesses of 0.095” through 0.125”. Rubber grommet included.

Switchcraft Type 280. ¼” straight plug with solder lugs and cable clamp. Switchcraft Heavy duty machined copper alloy handle, tip and body for unsurpassed ruggedness

Made by G&H industries. High quality, oxygen-free copper core phone plugs. Made in the USA. 1/2" profile.

Switchcraft Type 188 Jumbo Plug. ¼" Mono 2 Conductor Heavy Duty Cable Mount Plug - Nickel Finish.

3.5mm TRS jacks with a switched tip found in many DIY Eurorack projects. These Qingpu Electronics jacks can be panel mounted with wires or more commonly PCB mounted. The PJ3410 jacks can be used for both mono and stereo signals. Hardware sold separately. See accessory items below.

XLR 3 pole male to 3 pole male adapter, pre-wired, metal shell. Nickel. Features:

• Adapter pre-wired for convenience
• 120 ohm terminators

1/4" professional phone plug, nickel contacts, nickel shell The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip. The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.

Mod® "Top Brass" nuts are the easiest way to upgrade your Eurorack module or other 3.5 mm application to a more regal look - we call it "Top Brass". Designed with the same outer dimensions as Qingpu knurled nuts, these round brass nuts will fit any module using Qingpu or other similar metal-bushing jacks without covering up the jack labels. As their name implies, the Mod® "Top Brass" nuts are made out of pure brass, and while they look incredible on their own, their appearance also pairs extremely well with the immersion gold used on Make Noise and other similar modules. Rather than being knurled, Top Brass nuts have a smooth outer edge for a clean look. The nuts are slotted and will work with all existing nut drivers intended for use with the knurled Qingpu-style nuts. "Top Brass" nuts use M6x0.5 threading which matches the bushing on the ubiquitous Qingpu jacks and many of their copies.

Pure Tone has developed a high quality 1/4" two pole (mono) jack using a new patented design that improves upon and offers a more reliable connection than standard 1/4" jacks. The Pure Tone design features two springs per pole that secure the plug into place and create a 100% greater surface area connection at all contact points to improve stability and signal integrity. These jacks also increase the current capability of 1/4" connections.

Hex nuts for Rean jacks. Package of 12 Genuine Fender replacement jack nuts: 7/16-20 x 1/8 nickel-plated Used with many Fender amplifier jacks