Jacks & Plugs

S-H901-X ¼" Jack - Cliff, Solder Lug, for Marshall, metal nut
Solder terminals, switched. Metal ferrule, vintage style.
Features:
  • Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability
  • Tough, molded grade 1 black Nylon body.
  • Made in the U.K.
  • Supplied with a metal hexagonal mounting nut
  • Designed to receive both mono and stereo 1/4" jack plugs

Withstand Voltage: 2000VDC Min. Maximum Current: 5A Temperature Rating: -10°C ~ +70°C Life (Minimum): 10,000+ Operations Nominal Contact Resistance: < 50 mΩ
Starting at $2.60
W-QP-518MA 3.5mm Jack - Qingpu, Eurorack, Mono, Switched Tip, PC Mount
PCB mounted 3.5mm mono jacks commonly found in DIY Eurorack projects. These are the newest version from Qingpu Electronics featuring a square bushing plate for added durability. Hardware sold separately. See accessory items below.
$0.45
W-QP-WASHER Washer - Flat, for use on Qingpu Jacks
Flat washer for W-QP-419GR and W-QP-518MA 3.5mm jacks.
$0.09
W-QP-NUT-H Nut - Hex, for mounting Qingpu 3.5mm jacks
Hex nut for W-QP-419GR and W-QP-518MA 3.5mm jacks.
See W-QP-NUT-K for the knurled, slotted version of this nut.
See W-QP-WASHER for compatible washer
$0.09
S-H601A-X ¼" Jack - PC Mount, switched, mono
Mono input. PC mount terminals. Metal ferrule. Shorting. Similar to S-H901PC-X.
Starting at $1.39
S-H267X RCA Jack - Chassis Mount, Front Mount, Gold Plated
Colors Available:
Gold, black/red/white band, front mount female RCA phono jack. Multiple color options available.
$2.69
W-QP-NUT-K Nut - Knurled, for mounting Qingpu 3.5mm jacks
Knurled, slotted nut for W-QP-419GR and W-QP-518MA 3.5mm jacks.
See W-QP-NUT-H for the hex version of this nut.
See W-QP-WASHER for compatible washer
$0.09
W-SC-11 ¼" Jack - Switchcraft, Mono, open circuit
Switchcraft Type 11 Little-Jax phone jack. Mono 2-conductor, open circuit. Mates with standard ¼" plugs and is available with standard or long bushings. Great replacement for Fender® guitar & amp input jacks.
Starting at $1.95
W-SC-12A ¼" Jack - Switchcraft, Mono, shunt tip
Switchcraft Type 12A Littel-Jax shorting type phone jack. The switched terminal is normally closed and is usually connected to ground to eliminate hum when unplugged. Mono 2-conductor. Mates with standard ¼" plugs and is available with standard or long bushings. Includes nut and washer
Starting at $2.35
W-SC-280-X ¼" Plug - Switchcraft, cable-mount
Switchcraft Type 280. ¼” straight plug with solder lugs and cable clamp. Switchcraft Heavy duty machined copper alloy handle, tip and body for unsurpassed ruggedness
Starting at $3.15
S-H601-X ¼" Jack - Solder Lugs, switched, shorting
Mono input. Solder lugs, shorting. Metal ferrule, vintage style. Similar to S-H901-X.
$1.30
S-H902-X ¼" Jack - Cliff, solder lugs, switched
Solder terminals, switched. Used in modern Marshall amps. Features: Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability, tough, molded grade 1 black Nylon body.
Starting at $2.25
S-H650X ¼" Jack - Pure Tone, Mono, Open Circuit
Colors Available:
Pure Tone has developed a high quality 1/4" two pole (mono) jack using a new patented design that improves upon and offers a more reliable connection than standard 1/4" jacks. The Pure Tone design features two springs per pole that secure the plug into place and create a 100% greater surface area connection at all contact points to improve stability and signal integrity. These jacks also increase the current capability of 1/4" connections.
Starting at $4.20
W-SC-226-X ¼" Plug - Switchcraft, cable-mount, right-angle
Switchcraft ¼" Right Angle Plug (Type 226) Good for tight spaces Large terminals accept up to 16 AWG wiring (cables up to 0.25" diameter) All Metal exterior
Starting at $5.35
P-H180 Jack Plate - Single ¼", 2" Outside Diameter, Black Metal
  • Recessed steel cup
  • Designed for use with 1/4" jacks
  • Steel design
  • 3 mounting holes
$0.95
S-H903-X ¼" Jack - Cliff, PC Mount, switched, black
Input Jack. PC board terminals, switched. Used in modern Marshall amps, or as a replacement part for Marshall JCM 900 cabinets and more. See S-H955-X for white version.
Starting at $2.25
S-H506-A ¼" Jack - Mono, PC Mount, for Fender® Amps '88 - '99
Fender® Style ¼" Mono Input Jack with 4 PCB Terminals.
$1.95
W-SC-228-X ¼" Plug - Switchcraft, flat cable-mount, right-angle
Switchcraft ¼" Mono 2-conductor cable-mount plug. Flat shielded handle with solder terminals. Type 228. Used in Fender amps for speaker connections. Also perfect for close quarters pedal-to-pedal connections. Includes hardware
Starting at $4.95
S-H260X Tip Jack - Insulated Deluxe, panel mount
Colors Available:
  • Deluxe for standard .080" tip plug.
  • Machined contact with turret terminal
  • Hex socket head .188 for ease in mounting
  • Closed entry blocks access of probes greater than 0.085
  • Nylon UL approved for self extinquishing
  • Brass body
  • Silver finish
  • Contact: Brass with wrap around beryllium copper spring
  • Finish: Silver
  • Body: Nylon
  • Hardware: Nickel-plated nut
  • Body thread stripping torque: 0.4lb. in
  • Panel thickness: Up to 0.437
  • Current Rating: 10 A
  • Breakdown voltage: 5700 Vrms min
  • Contact resistance: 0.010 ohms max
  • Contact to panel C: 2 pF nominal
$1.75
S-H507-A ¼" Jack - Stereo, PC Mount, for Fender® Amps '88 - '99
Fender® Style replacement ¼" stereo input jack that has 9 PCB mount terminals.
$1.75
S-H901-PC-X ¼" Jack - Cliff, PC Mount, for Marshall, metal nut
PC terminals, switched. Metal ferrule, vintage style.
Starting at $2.60
W-QP-NUT-PJ-R Nut - Round, for mounting Qingpu PJ3410 3.5mm jacks
Knurled, slotted nut for W-QP-PJ3410 3.5mm jacks. See W-QP-NUT-PJ-H for the hex version of this nut.
$0.09
P-H167-X Jack Plate - for Telecaster guitars
Colors Available:
Avoid loose output jacks with this jack mount for Telecaster guitars. Includes two angled screws that ensure that the jack will be held tightly in place. Multiple color options available.
  • Capable of being screwed directly onto switchcraft jacks
$5.00
S-H280 Cable - vintage-style, ¼" to 2 Spade Lugs, 34" long
Vintage style speaker cable. ¼" plug to (2) spade lugs. Perfect replacement for vintage guitar amps where the speaker plugs directly into the chassis. 34" total length.
$4.95