Jacks & Plugs

¼" Plug - Switchcraft, Vintage, Brass, Cable-Mount
High quality vintage-design ¼” plug from Switchcraft. This TS (mono) plug features an all metal handle (for .29 to .30 inch cable diameter), cable clamp and a heavy copper alloy-plated flex relief spring (for .265 inch cable diameter maximum).
$11.95
¼" Plug - Amphenol, Mono, Straight, SwitchPlug™, Large
The Amphenol T series SwitchPlug™ uses a unique 360 degree precision sliding helical spring contact design to quietly and accurately switch the signal circuit safely to ground during instrument changes under load, thereby avoiding annoying thumps, pops and squeals.
$9.13
¼" Plug - Switchcraft, Mono, 2-conductor, heavy-duty jumbo
Switchcraft Type 188 Jumbo Plug. ¼" Mono 2 Conductor Heavy Duty Cable Mount Plug - Nickel Finish.
$7.95
¼" Plug - Lava, Low Profile, Solder, Right Angle
High quality made in USA ¼” plugs from Lava Cable. This right angle plug features an ultra low profile and a unique soldered connection that provides a quicker assembly than standard soldered connectors. The insulation system used in the plugs ensures a solid connection that is nearly impossible to short. Lava Soldered Right Angle Connectors are the smallest profile soldered plugs on the market today at only .405” in width and .515” in outer diameter. Soldering is easy with just one small solder point. Included insulators prevent shorting. To assemble:
  • Strip 0.75” of the outside jacket from the end of the instrument cable.
  • Feed the stripped end including the shield braid through the large black plastic insulator tube.
$7.95
¼" Plug - Straight, Used with F-Cap on Fender amps
Fender style 1/4" straight mono (tip-sleeve) open plug. Perfect for use as "open" plug for Fender "Hot Rod" and "Blues Reissue" amps having both "Main Speaker" and "External Speaker" jacks allowing you to connect an alternate speaker impedance with the open plug inserted in the "Main Speaker" jack (speaker load configuration 3).
$7.35
¼" Plug - G&H, Mono, Jumbo, Nickel, Copper Core
Made by G&H industries. High quality, oxygen-free copper core phone plugs. Made in America. For large wire, 8-12 gauge speaker cable.
$7.25
¼" Plug - Amphenol T-Series, Mono, Nickel
Amphenol "T-Series (Pro Range)" Phone Plug. 1/4" Mono straight plug with large Jaws cable clamp, metal backshell and black finish. Internal cable clamp fits cable outer diameters ranging from 0.236” to 0.295” (6 mm to 7.5 mm).
$7.01
Save 15%
Originally: $8.25
¼" Plug - Neutrik, Right-angle, black plastic, gold contacts
1/4" professional right-angle phone plug, nickel contacts, nickel shell The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip. The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.
Starting at $6.95
¼" Plug - Amphenol, Right Angle, Mono, Gold Contacts
2-pole 1/4" professional right-angle phone plug, gold contacts, black shell. Large jaw cable clamp for use with cable with an outer diameter of 5.5mm to 6.5mm.
$6.76
Save 15%
Originally: $7.95
¼" Plug - Switchcraft, cable-mount, for thicker cables
Switchcraft 285L ¼” plug for large cables. The 285L features the same spec’s and build quality as the Switchcraft 280 but features a larger cable clamp and a .375" rear hole in the handle. These are great plugs for thicker wires such as speaker cables. Specifications:
  • Sleeve, Tip and Body: Nickel-plated copper alloy
  • Terminals: Solder lug - Tinned copper alloy
  • Handles: Shielded - machined Nickel-plated copper alloy
  • Tubular insulator inside handle
$6.75
On Backorder
¼" Plug - Switchcraft, flat cable-mount, right-angle
Switchcraft ¼" Mono 2-conductor cable-mount plug. Flat shielded handle with solder terminals. Type 228. Used in Fender amps for speaker connections. Also perfect for close quarters pedal-to-pedal connections. Includes hardware
Starting at $6.25
¼" Plug - Switchcraft, cable-mount, right-angle
Switchcraft ¼" Right Angle Plug (Type 226) Good for tight spaces Large terminals accept up to 16 AWG wiring (cables up to 0.25" diameter) All Metal exterior
Starting at $6.25
¼" Plug - Neutrik, black plastic, gold contacts
1/4" professional phone plug, gold contacts, black shell The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip. The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.
Starting at $5.95
¼" Plug - Amphenol, Mono, Right Angle, Gold
Amphenol "Musician Series II" Phone Plug. 1/4" Mono right-angle plug with diecast shell, black finish, gold plated contacts and flexible grommet cable protection. Internal cable clamp fits cable outer diameters ranging from 0.256" to 0.315" (6.5 mm to 8 mm).
$5.95
¼" Plug - Neutrik, Right-angle, nickel body, nickel contacts
1/4" professional right-angle phone plug, nickel contacts, nickel shell The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip. The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.
Starting at $5.95
¼" Plug - Amphenol, Stereo, Satin
1/4" Stereo Phone plug, Diecast Shell, Satin finish, Flexible grommet. Features:
  • Stylised Shell design
  • Robust diecast shell
  • Great solderability with increased solder area
  • Precision machined contacts
  • Flexible grommet cable protection
  • Quick and easy assembly
$5.95
¼" Plug - Amphenol, Straight, Mono, Gold Contacts
2-pole 1/4" professional straight phone plug, gold contacts, black shell. Large jaw cable clamp for use with cable with an outer diameter of 5.5mm to 6.5mm.
$5.91
Save 15%
Originally: $6.95
¼" Plug - Cliff, Mono, Right angle, black
Original Cliff UK right angle black 1/4" mono plug. This Cliff jack plug is designed for use in many applications including audio, computer, military and industrial uses. The tip, ring, sleeve (TRS) connectors are manufactured from solid nickel plated brass with high temperature phenolic / PBT insulators. Features a cable clamp, which is an integral part of the ground screen contact and clamps firmly without damaging the cable.
$5.85
F-Cap - Plastic Cap for Straight Plug P-H55
F-cap, black plastic. Similar to that used on old Fender ® amps.
$5.50
Cable - vintage-style, ¼" to 2 Spade Lugs, 34" long
Vintage style speaker cable. ¼" plug to (2) spade lugs. Perfect replacement for vintage guitar amps where the speaker plugs directly into the chassis. 34" total length.
$4.99
On Backorder
¼" Plug - Amphenol, Mono, Right Angle, Satin
1/4" Mono Phone plug, Right angle, Diecast Shell, Satin finish, Flexible grommet. Features:
  • Stylised Shell design
  • Robust diecast shell
  • Great solderability with increased solder area
  • Precision machined contacts
  • Flexible grommet cable protection
  • Quick and easy assembly
$4.95
¼" Plug - G&H, Mono, Right Angle, Nickel, Copper Core
Made by G&H industries. High quality, oxygen-free copper core phone plugs. Made in the USA. 1/2" profile.
$4.85
¼" Plug - Amphenol, Jaws Clamp, Thermoplastic
Colors Available:
1/4" phone plug, jaws cable clamp, thermoplastic backshell. Features:
  • Stylised Shell design with ergonomic grip
  • Robust diecast keyed shell
  • Great solderability with increased solder area
  • Precision machined contacts
  • "Jaws" cable retention system
  • Quick and easy assembly
  • Nickel-plated contacts
Starting at $4.71
Save 10%
Originally: $5.23
¼" Plug - Switchcraft, Mono, Cable-Mount, 1” Handle
The Switchcraft 380 ¼” two-conductor (mono) plug. The 380 has a shorter handle than standard ¼” plugs making it a great option when a lower profile is needed such as on pedalboards or use with rack equipment. Specifications
  • Sleeve, Tip and Body: Nickel-plated copper alloy.
  • Terminals: Solder lug - Tinned copper alloy.
  • Screw: Tin-plated (screws size 3-48).
  • Handles: Nickel-plated copper alloy. Tubular insulator inside handle.
$4.59