Jacks & Plugs

¼" Jack - Switchcraft, Acoustic End Pin, Mono / Stereo, Nickel
High quality acoustic end pin style jacks from Switchcraft. These nickel plated jacks have three conductors, a strain relief clamp, and a threaded shroud for a professional looking wiring job. The special strap nut can be removed to reveal a hex nut that can be used for external tightening of the jack.
$11.95
¼" Jack - Pure Tone, Stereo, Double-Open Circuit, Long Thread
Pure Tone’s new long threaded three pole (stereo) 1/4" jack provides full contact for improved connections and signal integrity. This jack locks the cable securely into place creating a greater surface area connection to carry more signal for an improved frequency stability. This jack is a great choice for both mono and stereo applications as well as guitars using active electronics.
$9.99
¼" Jack - Switchcraft, Stereo, double open circuit, deep panel
Type 152B. ¼" Female Stereo Input Jack 3-conductor. Thick panel-mount jack with cable clamp. Brass finish.
$9.45
¼" Jack - Switchcraft, Mono, isolated break circuit
Switchcraft Type 13E phono jack. Mono 2-conductor isolated break circuit. Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing. Includes nut and washer.
$9.35
¼" Jack - Switchcraft, Mono, transfer circuit
1/4" Mono 2 Conductor Jack, Transfer Circuit. Used in Fender, part number: 004-1701-000. Includes nut and washer.
$8.95
¼" Jack - Switchcraft, Mono, isolated make circuit
Switchcraft ¼" Mono 2-Conductor Input Jack, Isolated Make Circuit (Type 13). Includes nut and washer
$6.95
On Backorder
¼" Jack - Fender®, Stereo, PC Mount, for Amps '88-'99
Original replacement for Fender® amps. ¼" Stereo Input Jack that has 9 PCB mount terminals.
$6.95
¼" Jack - Switchcraft, Stereo, shunt tip
Switchcraft 1/4" stereo jack, 4 solder lugs include: tip, tip-shunt, ring and sleeve.
$5.75
¼" Jack - Fender®, Mono, PC Mount, Closed Circuit
PCB mount Fender original mono jack. Closed circuit.
$5.75
Nut - Fender®, Hex, for Rean Jacks
Hex nuts for Rean jacks. Package of 12 Genuine Fender replacement jack nuts: 7/16-20 x 1/8 nickel-plated Used with many Fender amplifier jacks
$5.25
package of 12
¼" Jack - Pure Tone, Stereo, Double Open Circuit
Colors Available:
Pure Tone has developed a high quality 1/4" three pole (stereo) jack using a new patented design that improves upon and offers a more reliable connection than standard 1/4" jacks. The Pure Tone design features two springs for both the tip connection, a spring for the ring, and an additional spring for the shield connection. These help to secure the plug into place and create a greater surface area connection at contact points to improve stability and signal integrity. These jacks also increase the current capability of 1/4" connections.
Starting at $5.25
¼" Jack - Fender®, PC Mount, Mono
Original 4-pin Fender jack. Fits Fender amplifiers from 1988 - 1999. PC mount.
  • Direct replacement four-pin mono amplifier jack
  • Includes lock nut and washer
  • Fits Princeton® Chorus, Pro 185, BXR series, Stage™ 112SE, Ultimate Chorus™, Roc Pro™ Series, Performer series, Bronco™, '94 Twin®, Princeton 112+, Deluxe 112+, Automatic™ GT and Blues Junior™ amplifiers
$5.25
¼" Jack - Fender®, Stereo, for Amps 1999-Present
Fender R/A 1/4" stereo jack. Used 1999-present. Hex nuts not included (S-H510), bushing length = 0.34".
$4.95
Sold by the package of 2
¼" Jack - Peavey, Mono, PC Mount, non-insulated
12 ½" mm, mono, non-insulated, rean, PC mount.
$4.95
¼" Jack - Peavey, Stereo, Switched Tip & Ring, Insulated
Peavey TRS jack with a switched tip and switched ring connection. Stereo HID (High Definition), insulated. Please note that this does not include nuts or washers. Please see parts S-HRVNT, S-HRVLW, and R-VNUT-38 if you require them.
$4.65
¼" Jack - Peavey, Stereo, Plastic Bushing
Stereo, insulated, plastic bushing, bushing length = 0.29". Please note that this does not include nuts or washers. Please see parts S-HRVNT, S-HRVLW, and R-VNUT-38 if you require them.
$4.55
¼" Jack - Peavey, Stereo, PC Mount
12 ½" mm, stereo, insulated, PC mount, bushing length = 0.29".
$4.55
¼" Jack - Pure Tone, Mono, Open Circuit
Colors Available:
Pure Tone has developed a high quality 1/4" two pole (mono) jack using a new patented design that improves upon and offers a more reliable connection than standard 1/4" jacks. The Pure Tone design features two springs per pole that secure the plug into place and create a 100% greater surface area connection at all contact points to improve stability and signal integrity. These jacks also increase the current capability of 1/4" connections.
Starting at $4.25
¼" Jack - Peavey, Mono, non-insulated
2 tip HID (High Definition), non-insulated, metal bushing. Please note that this does not include nuts or washers. Please see parts S-HRVNT S-HRVLW, and R-VNUT-38 if you require them.
$4.25
¼" Jack - Fender®, Mono, for Amps 1999 to present
Fender R/A 1/4" mono jack. Used 1999-present. Hex nuts not included (S-H510).
$4.25
¼" Jack - Marshall, PC Mount, 9 Pin, Effects Loop Return
Genuine Marshall SKTP-00004 jack. This 9 pin jack is used as the return jack of the effects loop of some Marshall amps such as the JCM2000. Nut and washer are not included with this jack.The bushing is M12 x1.0 thread. For send jack, see S-H563
$4.00
Out of Stock
¼" Jack - Marshall, PC Mount, 5 Pin, Effects Loop Send
Genuine Marshall SKTP-00005 jack. This 5 pin jack is used as the send jack of the effects loop of some Marshall amps such as the JCM2000. Nut and washer are not included with this jack. The bushing is M12 x1.0 thread.
For return jack, see S-H562
$4.00
Out of Stock
¼" Jack - Cliff, Mono, PC Mount, L-leg, Tin
  • Withstand voltage: 2000V DC Minimum
  • Maximum current: 5A
  • Temperature rating: -10°C - 70°C
  • Life (minimum): 10,000+ operations
  • Nominal contact resistance:
$3.50
¼" Jack - Cliff, Sealed, Switched
Original Cliff sealed and switched blue jack. Fully threaded. Many types of professional music equipment nowadays use high power components, and need to be cooled by fans. Fans draw in dust and pollutants which can adversely affect the contacts of conventional jacks, with exposed contacts. This sealed jack avoids possibility of contamination of contacts by means of a sealing cover over the top and bottom of the jack.
Starting at $3.50