Jacks & Plugs

The Switchcraft Type 112BX enclosed ¼” jack is a high quality jack. This jack has three solder lugs. One for the tip, one for the ring, and one for the sleeve. These jacks have been widely used across the industry and can also be found in many popular 5U synthesizers. Includes nut and washer.

• Type 112BX
• 0.276" bushing length (standard)
• Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing.
• Stereo 3-Conductor
• Includes nut and washer

See W-SC-111X for mono version

The Switchcraft Type 111X enclosed ¼” jack is a high quality mono jack. This jack has two solder lugs. One for the tip and one for the sleeve. These jacks have been widely used across the industry and can also be found in many popular 5U synthesizers. Includes nut and washer.

• Type 111X
• 0.276" bushing length (standard)
• Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing.
• Mono 2-Conductor
• Includes nut and washer

See W-SC-112BX for stereo

Cliff metal chassis mount XLR connectors. 3 pole, male, with machined connectors. The Cliff range of professional, high quality XLR audio connectors can be used in numerous applications including professional and consumer audio, broadcast and industrial uses. These Cliff XLRs feature solder cups for wiring directly to the connector. Mounting hardware not included. Features

• The housing can be either front or rear mounted using the same panel cutout
• Machined connectors
• Solder cup
• Connectors are fitted with a grounding lug
• Compatible with all other XLR brands

Cliff metal chassis mount XLR connectors. 3 pole, female, with stamped connectors. The Cliff range of professional, high quality XLR audio connectors can be used in numerous applications including professional and consumer audio, broadcast and industrial uses. These Cliff XLRs feature solder cups for wiring directly to the connector. For greater reliability, the female connectors have contact pins which provide a large surface area and self-clean upon plug insertion. Mounting hardware not included. Features

• The housing can be either front or rear mounted using the same panel cutout
• A leading first mate last break socket contact is standard on all female connectors (Pin 1)
• Solder cup
• Connectors are fitted with a grounding lug
• Compatible with all other XLR brands

Dust cover for smaller low profile DC power jacks. This cover is simple to install and can help protect the power jack on effects pedals and other electronics using this style of DC jack. Jack sold separately.

Dust cover for standard size DC power jacks. This cover is simple to install and can help protect the power jack on effects pedals and other electronics using this style of DC jack. Jack sold separately.

½" panel mount with solder lugs. Round plastic with normally closed switch. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter.

Cable for connecting 9V batteries to pedals via their DC input jack. This cable is great for using batteries with pedals that don’t have a battery compartment or for quickly switching from a power supply to a battery. This cable is 3 ¼” inches in length. The barrel plug has a 5.5mm outer diameter and 2.1mm inner diameter. Battery not included.

Snap-in Lumberg panel mount barrel jack with solder lugs. This high quality jack is a similar size to the Lumberg low profile jack but easily snaps into place with no need to thread a nut inside the chassis. For use with barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter.

High quality ½" panel mount DC jack with solder lugs from Cliff Electronic Components. This jack is rear mounted which makes troubleshooting and repairs simpler since the jack does not need to be desoldered if the circuit needs to be removed from the enclosure. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Three solder lugs are available for tip, ring, and switch. Mounting nut included.

Switchcraft shouldered hex nuts for ⅜”-32 UNEF-2A threaded bushings. These nuts include a rubber grommet for use in sealed systems and also add a unique look to any build such as pedals or amplifiers. The large nut (W-SC-DRESS-1) is intended for panel or chassis thicknesses of 0.05” through 0.09”. The small nut (W-SC-DRESS-2) is intended for panel or chassis thicknesses of 0.095” through 0.125”. Rubber grommet included.

Pure Tone has developed a high quality 1/4" two pole (mono) jack using a new patented design that improves upon and offers a more reliable connection than standard 1/4" jacks. The Pure Tone design features two springs per pole that secure the plug into place and create a 100% greater surface area connection at all contact points to improve stability and signal integrity. These jacks also increase the current capability of 1/4" connections.

Low profile Lumberg panel mount barrel jack with solder lugs. This high quality jack is the perfect size for smaller builds where additional space is necessary. The Lumberg low profile DC jack is also great for builds where aesthetics are a priority. For use with barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Mounting nut included.

¼" female. Open circuit. Replacement for Fender®. Made in Taiwan.

3 pole open 1/4" jack, 3 contacts, with washer and nut, panel thickness 3.5 mm, with 0.205" faston tabs

PCB mount Fender original mono jack. Closed circuit.

Cliff UK 1/4" white jack, switched. 4 PC mount terminals include: tip, tip-shunt, sleeve and sleeve-shunt. External threading: 7/16-20. Features:

• Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability
• 'Kinked' legs for snap-in PCB mounting on PC-A and PC-C styles to facilitate pre-assembly and wave soldering
• Tough, molded grade 1 white Nylon body.
• Made in the U.K.
• Supplied with a white nylon hexagonal mounting nut
• Designed to receive both mono and stereo 1/4" jack plugs

• Withstand Voltage: 2000VDC Min.
• Maximum Current: 5A
• Temperature Rating: -10°C ~ +70°C
• Life (Minimum): 10,000+ Operations
• Nominal Contact Resistance: < 50 mΩ

The Switchcraft Type 112A enclosed ¼” jack is a high quality jack featuring a switched tip. This jack has three solder lugs. One for the tip, one for the sleeve, and one for the switch which connects to the tip when no plug is inserted. These jacks have been widely used across the industry and can also be found in many popular 5U synthesizers. Includes nut and washer

• Type 112AX
• 0.276" bushing length (standard)
• Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing.
• Mono 2-Conductor
• Includes nut and washer
• Tip is shunt

Dual, gold plated binding post.

• Red and black posts
• Accepts either single or dual banana plugs
• Mounts in two ½" holes on ¾" centers, panel thickness up to ¼"
• 15A rating
• Gold plated contacts.

1/4" stereo jack. 3 PC mount terminals include: tip, ring and sleeve. Metric threading: M12 x 1.0.

Pure Tone has developed a high quality 1/4" three pole (stereo) jack using a new patented design that improves upon and offers a more reliable connection than standard 1/4" jacks. The Pure Tone design features two springs for both the tip connection, a spring for the ring, and an additional spring for the shield connection. These help to secure the plug into place and create a greater surface area connection at contact points to improve stability and signal integrity. These jacks also increase the current capability of 1/4" connections.

XLR 3 pole male to 3 pole male adapter, pre-wired, metal shell. Nickel. Features:

• Adapter pre-wired for convenience
• 120 ohm terminators

The Amphenol T series SwitchPlug™ uses a unique 360 degree precision sliding helical spring contact design to quietly and accurately switch the signal circuit safely to ground during instrument changes under load, thereby avoiding annoying thumps, pops and squeals.

¼" female mono TS jack, shorting type, made in Taiwan.