Jacks & Plugs

XLR Plug - Switchcraft, premium, cable-mount
Switchcraft XLR 3-Pin Cable Mount Plug (Type A3F) Nickel body. Silver contacts. Latchlock. The original A Series premium XLR connector with adjustable dual pressure plate cable clamp, flexible strain relief, and removable pin insert. Cable-mount with silver pins. Nickel. Provides secure cable lock and strain relief for all standard size cables. Specifications Construction Sturdy, die-cast zinc with satin nickel finish to withstand hard use - even abuse. Insert Insulation High-impact, molded thermoplastic provides high dielectric strength, and superior insulation resistance. Locking Latchlock on female plugs and receptacles locks into groove in mating male connector to prevent accidental disconnect.
Starting at $5.45
¼" Jack - Pure Tone, Stereo, Double-Open Circuit, Long Thread
Pure Tone’s new long threaded three pole (stereo) 1/4" jack provides full contact for improved connections and signal integrity. This jack locks the cable securely into place creating a greater surface area connection to carry more signal for an improved frequency stability. This jack is a great choice for both mono and stereo applications as well as guitars using active electronics.
$9.99
¼" Jack - Peavey, Mono, non-insulated
2 tip HID (High Definition), non-insulated, metal bushing. Please note that this does not include nuts or washers. Please see parts S-HRVNT S-HRVLW, and R-VNUT-38 if you require them.
$4.25
¼" Plug - Straight, Used with F-Cap on Fender amps
Fender style 1/4" straight mono (tip-sleeve) open plug. Perfect for use as "open" plug for Fender "Hot Rod" and "Blues Reissue" amps having both "Main Speaker" and "External Speaker" jacks allowing you to connect an alternate speaker impedance with the open plug inserted in the "Main Speaker" jack (speaker load configuration 3).
$7.35
Dust Cap - For DC Power Jack, Standard Size
Dust cover for standard size DC power jacks. This cover is simple to install and can help protect the power jack on effects pedals and other electronics using this style of DC jack. Jack sold separately.
$0.35
Nut - Dress Nut, Slotted, ⅜”-32 UNEF, for Jacks & Pots
Slotted dress nut for ⅜”-32 threaded bushing such as standard Switchcraft ¼” jacks and CTS potentiometers. These plated brass nuts add a sleek look to any amplifier, pedal or guitar. This style of nut has a similar look to slotted round nuts found on plexi Marshall amps.
$2.95
Banana Plug - Screw Type, Gold Plated
Colors Available:
Internal stud for solder or solderless connection. Body is hex brass; tip is four leaved, phosphor bronze, gold plated spring. Gold spring type. Multiple color options available.
$1.64
¼" Jack - Cliff, PC Mount, L-Leg
Input jack, 4 PC board terminals, switched, L-leg mounting. Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability.
$2.95
¼" Plug - Lava, Low Profile, Solder, Right Angle
High quality made in USA ¼” plugs from Lava Cable. This right angle plug features an ultra low profile and a unique soldered connection that provides a quicker assembly than standard soldered connectors. The insulation system used in the plugs ensures a solid connection that is nearly impossible to short. Lava Soldered Right Angle Connectors are the smallest profile soldered plugs on the market today at only .405” in width and .515” in outer diameter. Soldering is easy with just one small solder point. Included insulators prevent shorting. To assemble:
  • Strip 0.75” of the outside jacket from the end of the instrument cable.
  • Feed the stripped end including the shield braid through the large black plastic insulator tube.
$7.95
¼" Plug - Amphenol, Jaws Clamp, Thermoplastic
Colors Available:
1/4" phone plug, jaws cable clamp, thermoplastic backshell. Features:
  • Stylised Shell design with ergonomic grip
  • Robust diecast keyed shell
  • Great solderability with increased solder area
  • Precision machined contacts
  • "Jaws" cable retention system
  • Quick and easy assembly
  • Nickel-plated contacts
Starting at $4.71
Save 10%
Originally: $5.23
¼" Jack - Rean, horizontal, switched, solder lugs
Horizontal 1/4" jack, all contacts switched, plastic housing with nut and washer, solder tap version
Starting at $0.99
XLR Jack - Switchcraft, premium, rectangular panel-mount
Receptacle for panel or chassis mounting. Flange has two .136" (3.45 mm) diameter countersunk holes for #5-40 flat head mounting screws (not supplied). Mounts from front of panel or chassis in .953" (24.21 mm) diameter. Standard latchlock;
Starting at $5.35
3.5mm Jack - Qingpu, Eurorack, Mono, Switched Tip, PC Mount
PCB mounted 3.5mm mono jacks commonly found in DIY Eurorack projects. These are the newest version from Qingpu Electronics featuring a square bushing plate for added durability. Hardware sold separately. See accessory items below.
$0.45
¼" Jack - Peavey, Stereo, Plastic Bushing
Stereo, insulated, plastic bushing, bushing length = 0.29". Please note that this does not include nuts or washers. Please see parts S-HRVNT, S-HRVLW, and R-VNUT-38 if you require them.
$4.55
Jack Plate - Plain Dish, ~\frac{9}{16}~" Deep, 18 Gauge Steel
Plain dish to allow for drilling your own holes.
$5.25
XLR Jack - Cliff, 3-Pole, Male, Solder Cup
Colors Available:
Cliff metal chassis mount XLR connectors. 3 pole, male, with machined connectors. The Cliff range of professional, high quality XLR audio connectors can be used in numerous applications including professional and consumer audio, broadcast and industrial uses. These Cliff XLRs feature solder cups for wiring directly to the connector. Mounting hardware not included. Features
  • The housing can be either front or rear mounted using the same panel cutout
  • Machined connectors
  • Solder cup
  • Connectors are fitted with a grounding lug
  • Compatible with all other XLR brands
Starting at $2.79
¼" Jack - Cliff, Solder Lug, Non-Switched, Plastic Nut
Solder terminals, non-switched. Used in many vintage pedals and amplifiers. For the switched version, see S-H902-X. Features:
  • Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability
  • Tough, molded grade 1 black Nylon body.
  • Made in the U.K.
  • Supplied with a black nylon hexagonal mounting nut
  • Designed to receive both mono and stereo ¼" jack plugs
  • Withstand Voltage: 2000VDC Min.
  • Maximum Current: 5A
  • Temperature Rating: -10°C ~ +70°C
  • Life (Minimum): 10,000+ Operations
  • Nominal Contact Resistance: < 50 mΩ
Starting at $1.59
RCA Jack - Chassis Mount, Front Mount, Gold Plated
Colors Available:
Gold, black/red/white band, front mount female RCA phono jack. Multiple color options available.
$2.85
¼" Jack - Cliff, PC Mount, switched, white
Cliff UK 1/4" white jack, switched. 4 PC mount terminals include: tip, tip-shunt, sleeve and sleeve-shunt. External threading: 7/16-20. Features:
  • Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability
  • 'Kinked' legs for snap-in PCB mounting on PC-A and PC-C styles to facilitate pre-assembly and wave soldering
  • Tough, molded grade 1 white Nylon body.
  • Made in the U.K.
  • Supplied with a white nylon hexagonal mounting nut
  • Designed to receive both mono and stereo 1/4" jack plugs
  • Withstand Voltage: 2000VDC Min.
  • Maximum Current: 5A
  • Temperature Rating: -10°C ~ +70°C
  • Life (Minimum): 10,000+ Operations
  • Nominal Contact Resistance: < 50 mΩ
$2.95
¼" Jack - Lumberg, Low Profile, Mono, Open Circuit
Low profile mono jacks made by Lumberg. These high quality jacks are the perfect size for tightly packed pedal enclosures. The premium look, feel, and construction make Lumberg jacks an excellent choice for any build.
  • M9*0.75 Bushing Thread
  • Mono 2-Conductor
  • Open Circuit (does not have switched terminal).
  • Includes nut and washer.
$1.95
¼" Jack - Open Circuit, Made in Taiwan
¼" female. Open circuit. Replacement for Fender®. Made in Taiwan.
$1.55
¼" Jack - Rean, horizontal, switched, PC mount
Horizontal 1/4" jack, all contacts switched, chrome ferrule nut
Starting at $1.20
¼" Jack - Stereo, PC Mount, metric threading
1/4" stereo jack. 3 PC mount terminals include: tip, ring and sleeve. Metric threading: M12 x 1.0.
$1.99
Nut - Hex, for mounting Qingpu 3.5mm jacks
Hex nut for W-QP-419GR and W-QP-518MA 3.5mm jacks. See W-QP-NUT-K for the knurled, slotted version of this nut. See W-QP-WASHER for compatible washer
$0.15