You are here

Kits

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(4 pages)
K-MOD101Amp Kit - MOD® Kits, MOD101 guitar amplifier

MOD 101 Guitar Amp Kit Features:



  • All Tube Design (solid-state diodes used only for full-wave rectification)
  • 60W output power into 4, 8, 16 and 20 Ω
  • 1 channel with customizable: tone stack, power tubes, negative feedback, input miller capacitance volt divider/LP filter, and preamp cathode bypass cap (all parts included)
  • Vintage channel controls: bass, treble and volume
  • Vintage pilot lamp and screw-on jewel cover for power-on indication
  • DPDT power switch circuit for instant high-voltage drain in power-off
  • Standby Switch

$465.00
$418.50
You save: 10%
Click to read more about this product.
K-MOD102-FAmp Kit - MOD® Kits, MOD102 guitar amp (Non-US Version)

The MOD102-F is the foreign (non-USA) version of the MOD 102 including a Hammond 369EX world power transformer instead of the 269EX. Please note: there is no power cord included with this kit (due to variations in electrical outlets around the world). You will need to find a power cord that can fit through the 1/4" diameter (6.35 mm) rubber grommet hole on the rear panel.


$250.00
$225.00
You save: 10%
Click to read more about this product.
K-MOD102Amp Kit - MOD® Kits, MOD102 guitar amplifier

For the non-US version of the MOD 102, please see K-MOD102-F MOD 102 Guitar Amp Kit Features:



  • All Tube Design (solid-state diodes used only for full-wave rectification)
  • 5W output power into 8 Ohm
  • 1 channel
  • Vintage channel controls: bass, treble and volume
  • Vintage pilot lamp and screw-on jewel cover for power-on indication
  • Output Impedance: 8 Ohm
  • Tubes included: one 12AX7 (preamp), one EL84 (JJ Electronic brand)
  • Hammond Mfg 269EX power transformer and P-T31 single ended output transformer
  • Cathode biased class

$215.00
$193.50
You save: 10%
Click to read more about this product.
K-MOD102-PLUSAmp Kit - MOD® Kits, MOD102+ guitar amp

The MOD102+ expands on the same all analog vacuum tube classic American circuit design combined with a British style Class A output section as the Original MOD102 with some much added special “+” features. These special features include a three position progressive toggle switch for off-standby-power and additional push-pull functionality for each control - pull out the bass control knob for “mid boost”, pull out the treble control knob for “bright”, pull out the volume control knob for “turbo”.


$265.00
$238.50
You save: 10%
Click to read more about this product.
K-701Amp Mod Kit - MOD® Kits, 6L6GC to EL34 Conversion

This kit is for the guitarist who owns a vintage Fender amp that uses two 6L6GC's and wants to be able to use EL34 tubes in their place. The kit comes with electronic components, two EL34 vacuum tubes and easy to follow instructions. You will need your own tools and solder.


$38.95
$35.06
You save: 10%
Click to read more about this product.
K-700Amp Mod Kit - MOD® Kits, Bass to Tremolo Conversion Kit

This kit was designed for the guitarist who owns a silver-face Bassman and rarely uses the bass instrument channel. Turn the bass instrument channel into a foot-switchable vintage tremolo effect for the normal channel. The kit comes with parts and easy to follow instructions. You will need your own tools and solder


$25.95
$23.36
You save: 10%
Click to read more about this product.
K-703Amp Mod Kit - MOD® Kits, Normal to Bass Conversion

This kit was designed for those who play both guitar and bass. Turn the Normal Channel in your silver-face or black-face Fender amp into the Bass Instrument channel. The kit comes with parts and easy to follow instructions. You will need your own tools and solder.


$16.95
$15.26
You save: 10%
Click to read more about this product.
K-702Amp Mod Kit - MOD® Kits, Tone Stack Mod

This kit is for those guitarists who want to experiment with spicing up the tone of their vintage silver-face or black-face Fender amp by modifying the tone stack components. The kits comes with parts and easy to follow instructions. You will need your own tools and solder.


$16.95
$15.26
You save: 10%
Click to read more about this product.
K-MOD103Effects Kit - MOD® Kits, The Wave, Spring Reverb

The Wave is a versatile stand-alone, tube driven analog spring reverb unit kit. It can be used in front of your guitar amp or as a line-level analog reverb effect for the recording studio. Two controls allow you to serve up a wide range of wetness from just a touch to over the top psychedelia. The "dwell" control adjusts the input signal level driving the tank and the "reverb" control adjusts the level of output reverberations from the tank. The Wave's all tube design utilizes four dual triode vacuum tubes - three 12AX7s and one 12AT7 - and comes with a MOD® three-spring reverb tank.


$275.00
$247.50
You save: 10%
Click to read more about this product.
K-976Effects Pedal Kit - MOD® Kits, Resonator Deluxe, Octave-Up Fuzz
The Ring Resonator Deluxe is like having two all analog pedals in one. It contains the octave-up fuzz effect of the original Ring Resonator with added LED, push-push output pot and mini-toggle switch. With the push-push output pot down, the octave-up effect is removed and fuzz-only is achieved. In the fuzz-only mode of operation the toggle switch allows you to switch between dark fuzz and bright fuzz tones.
MOD® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. All effects pedals operate on a 9V battery.
$74.95
$67.46
You save: 10%
Click to read more about this product.

Pages

(4 pages)
Subscribe to RSS - Kits