You are here

Kits

Are you a DIY'er and enjoy building your own gear? Our kits range from beginner to advanced skills, so there is something for everyone!

Mod Kits - Mod® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring.
Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(3 pages)
K-700Amp Mod Kit - MOD® Kits, Bass to Tremolo Conversion Kit

This kit adds tremolo to silverface Fender® Bassman amps such as the Bassman 70 or Bassman 100. Using the tube from the Bass Instrument channel, the circuit is modified into the classic tube tremolo circuit. The Volume and Treble knobs become the Speed and Intensity controls while the Bass knob is replaced with a jack for the footswitch. The Bright switch becomes an On/Off switch for the tremolo when not using a footswitch.


$25.95
Click to read more
K-701Amp Mod Kit - MOD® Kits, 6L6GC to EL34 Conversion

This kit converts a standard class A/B dual 6L6GC power amp to a dual EL34 power amp. Changing the screen grid resistors along with altering the bias circuit is required for this modification. All parts necessary to complete the conversion are included along with detailed picture instructions. A matched pair of EL34 tubes is included with the kit.


$38.95
Click to read more
K-702Amp Mod Kit - MOD® Kits, Tone Stack Mod

This kit converts the TMB tone stack of a blackface or silverface amp to a modern aggressive voiced tone stack. The modification is achieved by replacing capacitor and resistor values in the original tone stack. All parts required for the conversion are included in the kit along with detailed picture instructions.


$16.95
Click to read more
K-703Amp Mod Kit - MOD® Kits, Normal to Bass Conversion

This kit converts the Normal channel of a blackface or silverface amp into the classic Bass Instrument channel from Bassman amps. This modification is achieved by altering the tone stack and works for both TMB and TB tone stacks. All parts required for the conversion are included in the kit along with detailed picture instructions.


$16.95
Click to read more
K-915Effects Pedal Kit - MOD® Kits, The Verb Deluxe, Digital Reverb

The Verb Deluxe kit is built around the Belton Digi-Log Mini Module (P-RBTDR-2H-X) for a great digital reverb sound. The Belton Digi-Log module was built as a replacement for traditional spring reverberation units. Features include both Dwell and Mix controls, allowing the dry signal to be blended with the processed signal from a just hint of reverb to deep, cavernous echoes. The dwell control adds an extra flexibility, providing a full palette of sweet reverb sound. The effect pedal operates on a 9V battery. For a longer lasting option, a 9-volt adapter can be purchased separately. The Godlyke 9-volt adapter (M-PAS-S) may be purchased separately to power your new pedal.


$79.95
Click to read more
K-920Effects Pedal Kit - MOD® Kits, The Piledriver, Power Boost

"The Piledriver" is a clean-boost kit that will provide up to 38dB of gain to your guitar signal. Use it to push your preamp into overdrive or as a line driver if you are experiencing signal degradation from your effects chain. This is a simple kit and great for beginners!


$27.95
Click to read more
K-930Effects Pedal Kit - MOD® Kits, The Persuader, Tube Drive

Build your own tube preamp pedal built around a 12AX7 tube. Go from clean, warm tone to smooth, real tube overdrive. This kit includes pre-drilled die-cast aluminum enclosure and all parts with easy to follow instructions. All you need to provide is solder and soldering iron. The Persuader allows for easy access to the tube, giving you the ability to quickly experiment with different tube brands and 12AX7 tube relatives. Operates on a 9V battery or AC adapter, which is not included. When completed, this pedal draws considerable current and battery life will be short. The Godlyke 9-volt adapter (M-PAS-S) may be purchased separately to power your new pedal.


$67.95
Click to read more
K-950Effects Pedal Kit - MOD® Kits, The Thunderdrive, Overdrive

The Thunderdrive is an overdrive pedal kit that will provide a signal boost at low gain settings and its own distortion at maximum gain settings. You can use it to push your preamp into overdrive or as a source of smooth distortion. Adjusting volume control and gain control results in a wide variety of tones in spite of its simple construction. This pedal is capable of overdriving the preamp section of your guitar amp or adding its own layer of distortion at lower volume. Using point to point wiring and easy to follow instructions you can have a working overdrive pedal in a matter of hours. All you need to provide is solder and a soldering iron. Uses 9 volt battery which is not included.


$29.95
Click to read more
K-955Effects Pedal Kit - MOD® Kits, The Thunderdrive Deluxe, Overdrive
The Thunderdrive Deluxe LTD is an overdrive pedal kit that will provide a strong, clean signal boost in the early gain settings and smooth distortion at maximum gain settings. Adjusting "Output" and "Distortion" controls provides a wide variety of tones in spite of its simple construction. It is capable of overdriving the pre-amp section of your guitar amp or adding its own layer of distortion at lower volume. This version is equipped with a three-position diode-selector switch.

The switch offers three different settings and tones. The top position is the classic silicon clipping diodes used in the original Thunderdrive. The middle position gives you the lifted diode "turbo" sound from the Deluxe model. The bottom position is a new setting limited to this version using germanium diodes for a warm vintage distortion.

This is an easy build kit with point to point wiring and clear, easy to follow instructions.
$39.95
Click to read more
K-956Effects Pedal Kit - MOD® Kits, The Thunderdrive Deluxe LTD, Overdrive

The Thunderdrive Deluxe LTD is an overdrive pedal kit that will provide a strong clean signal boost in the early gain settings and smooth distortion at maximum gain settings. Adjusting output and distortion controls provides a wide variety of tones in spite of its simple construction. It is capable of overdriving the preamp section of your guitar amp or adding its own layer of distortion at lower volume. This version is equipped with a three position diode selector switch.



The switch offers three different settings and tones. The top position is the classic silicon clipping diodes used in the original Thunderdrive. The middle position gives you the lifted diode "turbo" sound from the Deluxe model. The bottom position is a new setting limited to this version using germanium diodes for a warm vintage distortion.


$49.95
Click to read more

Pages

(3 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Kits