You are here


Filter these results
Sort By:
products per page
View Mode: List View · Grid View


(5 pages)
K-978Kit - The Step Ladder, Passive Input Attenuator Pedal Kit, MOD Kits DIY
The Step Ladder is a passive input attenuator using high quality components for excellent reliability. True-bypass mode provides the maximum signal level. The attenuator pot and two toggle switches allow for flexibility in the amount of signal attenuation when not in bypass mode. Treble bleed capacitors in the circuit retain crisp high frequencies even at maximum attenuation.
The Step Ladder is ideal for anything from getting a slight boost while playing single-note acoustic guitar leads or for jumping from clean to overdrive in a high-gain electric guitar amp.
Click to read more about this product.
K-MOD102-PLUSKit - MOD 102+ DIY Guitar Amplifier
The MOD102+ expands on the same all analog vacuum tube classic American circuit design combined with a British style Class A output section as the Original MOD102 with some much added special “+” features. These special features include a three position progressive toggle switch for off-standby-power and additional push-pull functionality for each control - pull out the bass control knob for “mid boost”, pull out the treble control knob for “bright”, pull out the volume control knob for “turbo”.
Click to read more about this product.
K-MOD103Kit -"The Wave" Analog Tube Driven Spring Reverb
The Wave is a versatile stand-alone, tube driven analog spring reverb unit kit. It can be used in front of your guitar amp or as a line-level analog reverb effect for the recording studio. Two controls allow you to serve up a wide range of wetness from just a touch to over the top psychedelia. The "dwell" control adjusts the input signal level driving the tank and the "reverb" control adjusts the level of output reverberations from the tank.
The Wave's all tube design utilizes four dual triode vacuum tubes - three 12AX7s and one 12AT7 - and comes with a MOD® three-spring reverb tank.
Click to read more about this product.
K-915Kit - "The Verb Deluxe" Digital Reverb Pedal, Mod Kits DIY
The Verb Deluxe kit is built around the Belton Digi-Log Mini Module. Features include both Dwell and Mix controls, allowing the dry signal to be blended with the processed signal from a just hint of reverb to deep, cavernous echoes. The dwell control adds an extra flexibility, providing a full palette of sweet reverb sound. The effect pedal operates on a 9V battery. For a longer lasting option, a 9-volt adapter can be purchased separately. The Godlyke 9-volt adapter (M-PAS-S) may be purchased separately to power your new pedal.
Click to read more about this product.
K-400Kit - Electricity Kit
Make Your Own Real Working Circuit Board!
Become a Junior Electrician" by building a real working Circuit Board! Learn about how electricity works by conducting experiments with switcheswirescontactsresistors and light bulbs! 48-page booklet included.
Kit Includes: 1 manual1 circuit board base1 battery holder1 brass strip2 light bulbs with holders1 switch11 long wires11 short wires2 bulb holders clamps1 Morse Code switch22 washers33 brads2 resistors1 plastic jar with lid1 steel wool14 springs.
Not suitable for children under 36 months due to small size of components
Click to read more about this product.
K-MOD102Kit - MOD 102 DIY Guitar Amplifier
For the non-US version of the MOD 102, please see K-MOD102-F
MOD 102 Guitar Amp Kit Features:
  • All Tube Design (solid-state diodes used only for full-wave rectification)
  • 5W output power into 8 Ohm
  • 1 channel
  • Vintage channel controls: bass, treble and volume
  • Vintage pilot lamp and screw-on jewel cover for power-on indication
  • Output Impedance: 8 Ohm
  • Tubes included: one 12AX7 (preamp), one EL84 (JJ Electronic brand)
  • Hammond Mfg 269EX power transformer and P-T31 single ended output transformer
  • Cathode biased class
Click to read more about this product.
K-920Kit - "The Piledriver" Power Boost Effects Pedal, Mod Kits DIY
"The PileDriver" is a clean boost kit that will provide up to 38dB of gain to your guitar signal. Use it to push your preamp into overdrive or as a line driver if you are experiencing signal degradation from your effects chain. This is a simple kit and great for beginners!
Click to read more about this product.
K-930Kit - "The Persuader" Tube Drive Effects Pedal, Mod Kits DIY
Build your own tube preamp pedal built around a 12AX7 tube. Go from clean, warm tone to smooth, real tube overdrive. This kit includes pre-drilled die-cast aluminum enclosure and all parts with easy to follow instructions. All you need to provide is solder and soldering iron. The Persuader allows for easy access to the tube, giving you the ability to quickly experiment with different tube brands and 12AX7 tube relatives. Operates on a 9V battery or AC adapter, which is not included. When completed, this pedal draws considerable current and battery life will be short.
Click to read more about this product.
K-704Kit - Original Fender, Mid Boost Preamp for Strats
This kit includes all of the parts needed to upgrade your guitar with the Mid Boost Pream used on the Buddy Guy and Eric Clapton Strats. Includes PCB ASSY Clapton preamp, Control 50K audio, Control 350K special taper, washer, jack output OPN stereo surge, TBX tone control and schematic wiring diagram.
Click to read more about this product.
K-900Kit - "The Rattler" Distortion Effects Pedal, Mod Kits DIY
Build your own distortion effects pedal! Easy to build, point to point wiring. Tone similar to the Vintage 60s and 70s effects pedals. Pre-drilled die cast aluminum boxes. Comes with variable components to customize your tone! Uses 9-volt battery which is not included.
Click to read more about this product.


(5 pages)
Subscribe to RSS - Kits