Pedals & Kits

PCB and parts kit for the MKIII / MKIV fuzz. This kit includes all of the resistors, capacitors, diodes, potentiometers, and terminal pins used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own.

The Mod® Electronics Trill tremolo pedal offers classic tremolo tones in an easy to build kit. The Trill's speed knob provides a wide range from a very slow to rapid fire effect. The depth knob varies the ratio between effected and dry signal. Using modern, low noise transistors makes operation of The Trill quiet with no signal drop when engaged. The Trill uses true bypass foot switching so it is out of the signal path when not engaged. All you need to provide is solder and tools! Uses 9 volt battery which is not included.

The SD9 Sonic Distortion offers saturated distortion perfect for screaming leads and thick rhythms. The SD9 was designed in the same era as the OD9 and this pedal can go toe-to-toe with its overdrive counterpart. Providing smooth distortion, long sustain, and clear articulation, the SD9 can fill a room with classic distortion sounds. Features

• Bright distortion with articulate pick attack over the entire frequency range.
• Sweet harmonics and accentuated high-end tones
• True Bypass Switching
• Low noise mechanical switch
• LED indicator for effect on/off
• DC power or 9V battery
• Made in Japan

PCB and parts kit for the Iss 1 fuzz built in the style of the standard germanium Fuzz Face. This kit includes all of the resistors, capacitors, and transistors used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own.

The Mod® Electronics Rock Bottom is a bass fuzz kit that gives you all of the sizzle you'd expect from a vintage fuzz without sacrificing those low frequencies. Use the blend pot to set your fuzz levels and dial in the volume to get that sound you need. This versatile pedal can be used for the sludgiest bass tones to the cleanest boost and everything in-between.

Snubber parts kit for circuits. Used to build a "snubber circuit" to remove unwanted high frequencies and high voltages resulting from output transformer ringing in a guitar amplifier, without the "brick wall" effect of using diodes.

The Maxon GE601 graphic equalizer is the perfect tool for dialing in guitar tone. The six bands are set with slide potentiometers offering precision controls with a visual representation of the sound spectrum. Each band can both cut and boost sound for a variety of tonal shaping effects as well as frequency specific boost effects.
Features

• Six-band graphic eq with an overall level volume capable of producing various sounds
• Bands cover 100Hz to 3.2KHz for effective tone shaping with guitars
• Each band can cut or boost providing a variety of uses
• LED indicator for effect on/off
• DC power or 9V battery
• Made in Japan

The Mod® Electronics Erratic Clutch Deluxe is a unique effect pedal kit that gives you fuzzy square wave distortion as well as a monophonic sub-octave square wave using a total of only four transistors. The two signals can be used individually or mixed together for a raw and sonically rich synthy output. Full of character and quirk, this pedal will give you a truly original sound. The middle knob is the bias control. This adjusts the pulse width in the initial fuzz stage of the pedal. Set this knob to fit your pickups and playing style. The closer to the center the longer the note will sustain but with that comes more chaotic tracking for the divider. Moving it more clockwise or counterclockwise will give you more predictable note tracking on the divider with less sustain.

Convert your Epiphone Valve Jr. into a Lite IIb 18 Watt amp using the "Baby Will" kit. The Baby Will is a PCB simplified version of the legendary Marshall 18 Watt 1974x circuit. The circuit laid out on a circuit board is known as the LiteIIb. It's capable of tone from clean jazz, crunchy blues, to raunchy classic rock. Crank up the volume and you'll be in AC/DC Back In Black heaven

The Maxon PT999 is a direct reissue of their classic 1970’s analog phaser. This pedal can range in speed from 0.2Hz up to 14Hz for a wide range of phase effects. The lower speeds offer slow moving phasing with a subtle and shimmering sound while faster speeds can take sounds into swirling and swooshing phaser sounds.
Features

• Low-noise design with wide dynamic range perfect for both live sound and recording
• Works well with any electric instrument such as guitar, bass, and keyboards
• Offers a variety of sounds using the speed control to morph from clear and mild phase tones to heavy rolling phaser sounds
• LED indicator for effect on/off
• DC power or 9V battery
• Made in Japan

The K-GMOD-1 is a vintage style wiring kit for Telecaster guitars. Use this kit to upgrade your current Tele electronics to high quality parts. This kit also includes a treble bleed mod for the volume pot to enhance clarity with lower settings and comes with detailed instructions and all the parts you need to make your modification.

The Mod® Electronics Verb Deluxe kit is built around the Belton Digi-Log Mini Module (P-RBTDR-2H-X) for a great digital reverb sound. The Belton Digi-Log module was built as a replacement for traditional spring reverberation units. Features include both Dwell and Mix controls, allowing the dry signal to be blended with the processed signal from a just hint of reverb to deep, cavernous echoes. The dwell control adds an extra flexibility, providing a full palette of sweet reverb sound. The effect pedal operates on a 9V battery. For a longer lasting option, a 9-volt adapter can be purchased separately. The Godlyke 9-volt adapter (M-PAS-S) may be purchased separately to power your new pedal.

The Ring In Return is an octave-up fuzz effect that is an all-analog design that captures those late 60s octave-up fuzz tones. Transformer-coupled germanium diodes produce sounds that range from a subtle octave-up to thick, harmonically-rich sonic textures and synth-like tones. Experimenting with different pickups and tone-control settings on your guitar with The Ring In Return can also produce sitar-like sounds. Warning: This circuit was designed for use with a 9 VDC power supply only.

The K-GMOD-3L is a vintage style wiring kit for Les Paul guitars. This version comes with long bushing pots for carved top Les Paul’s. Use this kit to upgrade your current Les Paul electronics to high quality parts. This kit also includes a treble bleed mod for the volume pots to enhance clarity with lower settings and comes with detailed instructions and all the parts you need to make your modification.

The Mod® Electronics Wave is a versatile stand-alone, tube driven analog spring reverb unit kit. It can be used in front of your guitar amp or as a line-level analog reverb effect for the recording studio. Two controls allow you to serve up a wide range of wetness from just a touch to over the top psychedelia. The Dwell control adjusts the input signal level driving the tank and the Reverb control adjusts the level of output reverberations from the tank. The Wave's all tube design utilizes four dual triode vacuum tubes - three 12AX7s and one 12AT7 - and comes with a MOD® three-spring reverb tank. MOD® reverb tanks are deemed the closest to the original reverb tanks from the '60s made today. The Wave's reverb function can be switched in and out pop-free via the front panel toggle or with a footswitch. Footswitch sold separately (see P-H470 for compatible footswitch).

PCB and parts kit for the Iss 2 fuzz built in the style of a BC108 Fuzz Face. This kit includes all of the resistors, capacitors, and transistors used on the included circuit board. For the BC108 style parts kit, a pair of BC108C transistors are included.

The Mod® Electronics Piledriver is a clean-boost kit that will provide up to 38dB of gain to your guitar signal. Use it to push your preamp into overdrive or as a line driver if you are experiencing signal degradation from your effects chain. This is a simple kit and great for beginners!

The K-GMOD-4 is a vintage style wiring kit for PRS guitars. Use this kit to upgrade your current PRS electronics to high quality parts. This kit also includes a treble bleed mod for the volume pot to enhance clarity with lower settings and comes with detailed instructions and all the parts you need to make your modification.

The Mod® Electronics MOD102+ expands on the same all analog vacuum tube classic American circuit design combined with a British style Class A output section as the Original MOD102 with added additional “+” features. These special features include a three position progressive toggle switch for off-standby-power and additional push-pull functionality for each control - pull out the bass control knob for “mid boost”, pull out the treble control knob for “bright”, pull out the volume control knob for “turbo”.

PCB and parts kit for the MKII fuzz pedal. This is based on the classic stripboard Tone Bender Professional. This stipboard fuzz circuit was also used in some versions of the Supa Fuzz as well as some other fuzz pedals. This kit includes all of the resistors, capacitors used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own.

The Maxon OD808 is an identical circuit to the original TS808 Tubescreamer Maxon designed and built in the late 1970s. Featuring a JRC4558, the OD808 offers the same natural overdriven tones as the original pedals used widely across all genres of music. The OD808 has a warmer and smoother tone than the OD-9 that pairs nicely with clean amps in addition to sounding great in just about any rig.
Features

• Natural and smooth overdrive effects with tube-like saturation
• Preserves the original tone of the instrument
• Produces a variety of sound ranging from a clean boost to fully saturated overdrive
• LED indicator for effect on/off
• DC power or 9V battery
• Made in Japan

The K-GMOD-6 is a vintage style wiring kit for ES-335 guitars. Use this kit to upgrade your current ES-335 electronics to high quality parts. This kit also includes a treble bleed mod for the volume pots to enhance clarity with lower settings and comes with detailed instructions and all the parts you need to make your modification.

The Mod® Electronics Step Ladder is a passive input attenuator using high quality components for excellent reliability. True-bypass mode provides the maximum signal level. The attenuator pot and two toggle switches allow for flexibility in the amount of signal attenuation when not in bypass mode. Treble bleed capacitors in the circuit retain crisp high frequencies even at maximum attenuation. The Step Ladder is ideal for anything from getting a slight boost while playing single-note acoustic guitar leads or for jumping from clean to overdrive in a high-gain electric guitar amp.

PCB and parts kit for the V828 fuzz pedal. This is based on the classic Italian-made V828 Tone Bender. These were also sold under the Jen brand. This kit includes all of the resistors, capacitors, and solder tags used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own.