You are here

Kits

Are you a DIY'er and enjoy building your own gear? Our kits range from beginner to advanced skills, so there is something for everyone!

Mod Kits - Mod® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring.
Filter these results
Sort By:
products per page
View Mode: List View · Grid View
K-950Effects Pedal Kit - MOD® Kits, The Thunderdrive, Overdrive

The Thunderdrive is an overdrive pedal kit that will provide a signal boost at low gain settings and its own distortion at maximum gain settings. You can use it to push your preamp into overdrive or as a source of smooth distortion. Adjusting volume control and gain control results in a wide variety of tones in spite of its simple construction. This pedal is capable of overdriving the preamp section of your guitar amp or adding its own layer of distortion at lower volume. Using point to point wiring and easy to follow instructions you can have a working overdrive pedal in a matter of hours. All you need to provide is solder and a soldering iron. Uses 9 volt battery which is not included.


$29.95
Click to read more
K-MOD101Amp Kit - MOD® Kits, MOD101 guitar amplifier

MOD 101 Guitar Amp Kit Features:



  • All Tube Design (solid-state diodes used only for full-wave rectification)
  • 60W output power into 4, 8, 16 and 20 Ω
  • 1 channel with customizable: tone stack, power tubes, negative feedback, input miller capacitance volt divider/LP filter, and preamp cathode bypass cap (all parts included)
  • Vintage channel controls: bass, treble and volume
  • Vintage pilot lamp and screw-on jewel cover for power-on indication
  • DPDT power switch circuit for instant high-voltage drain in power-off
  • Standby Switch

$595.00
Click to read more
K-700Amp Mod Kit - MOD® Kits, Bass to Tremolo Conversion Kit

This kit adds tremolo to silverface Fender® Bassman amps such as the Bassman 70 or Bassman 100. Using the tube from the Bass Instrument channel, the circuit is modified into the classic tube tremolo circuit. The Volume and Treble knobs become the Speed and Intensity controls while the Bass knob is replaced with a jack for the footswitch. The Bright switch becomes an On/Off switch for the tremolo when not using a footswitch.


$25.95
Click to read more
K-701Amp Mod Kit - MOD® Kits, 6L6GC to EL34 Conversion

This kit converts a standard class A/B dual 6L6GC power amp to a dual EL34 power amp. Changing the screen grid resistors along with altering the bias circuit is required for this modification. All parts necessary to complete the conversion are included along with detailed picture instructions. A matched pair of EL34 tubes is included with the kit.


$38.95
Click to read more
K-702Amp Mod Kit - MOD® Kits, Tone Stack Mod

This kit converts the TMB tone stack of a blackface or silverface amp to a modern aggressive voiced tone stack. The modification is achieved by replacing capacitor and resistor values in the original tone stack. All parts required for the conversion are included in the kit along with detailed picture instructions.


$16.95
Click to read more
K-703Amp Mod Kit - MOD® Kits, Normal to Bass Conversion

This kit converts the Normal channel of a blackface or silverface amp into the classic Bass Instrument channel from Bassman amps. This modification is achieved by altering the tone stack and works for both TMB and TB tone stacks. All parts required for the conversion are included in the kit along with detailed picture instructions.


$16.95
Click to read more
K-985Effects Pedal Kit - MOD® Kits, The Wahtz, Wah
The Wahtz Wah Pedal Kit produces the classic Wah tone you've come expect with a hint of extra bite and growl.
True bypass switching insures no loss of signal when the Wah effect is not engaged; and the long life potentiometer manufactured specifically for use in Wah pedals is included to provide years of smooth, quiet operation.
Point to point construction allows advanced kit builders to easily experiment with modifications to further tailor the tone to more individual tastes.
MOD® Kits and Assemblies are designed to give novice and experienced musicians the opportunity to build or modify their own amps, effects pedals and guitars. All kits come with easy-to-follow instructions and use point-to-point wiring. All effect pedals and amplifiers come with a pre-drilled enclosure and all necessary parts are included. All you need to provide are hand tools, a soldering iron and solder.
$109.95
Click to read more
K-995Effects Pedal Kit - MOD® Kits, The Aggressor, Distortion

The Aggressor is a high gain distortion pedal kit that delivers contemporary distortion with plenty of chunk and ear-splitting pitch harmonics. The distortion effect goes from subtle break-up to over-the-top molten distortion at maximum gain. The Aggressor features true bypass, LED indicator, and a versatile tone control with a scoop/bump switch that shifts the mid-frequency response allowing you to craft a tone that fits your style of playing. It works well with humbuckers and single coil pickups, so you can turn any guitar into a lethal weapon capable of inflicting serious brain damage and spontaneous combustion! MOD® Kits are designed to give novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy-to-follow instructions and use point-to-point wiring. A pre-drilled enclosure and all necessary parts are included.


$74.95
Click to read more
K-965Effects Pedal Kit - MOD® Kits, The Contortionist II, Fuzz

The Contortionist II kit is an all analog, high octane fuzz box. It produces fuzz with layered octave overtones similar to those produced by an electronic-bow. The frequency multiplier circuitry creates harmonics that swell and recede depending on gain setting, pick attack, neck position and pickup. This is a high gain circuit that can put out up to 2 volts and will provide ample amounts of sustain. The Contortionist II has all the features of the original Contortionist with an added tone control for a wider range of sounds, and an LED that lights up when the unit is activated.


$47.95
Click to read more
K-977Effects Pedal Kit - MOD® Kits, Suspended Chime, Chorus, Delay

The Suspended Chime has two powerful effects in one pedal - chorus and chorus/delay. The Suspended Chime features a blend knob which allows you to go from subtle to lush chorus effect in either set up. Using the selector switch, you can add a 190 millisecond delay to the chorus introducing special depth to your tone. Varying the dry/wet mix can fatten your rhythms or produce a shimmering 12-string sound. The Suspended Chime kit comes equipped with an LED indicator and industry standard 9 volt center negative power jack. MOD® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. All effects pedals operate on a 9V battery.


$99.95
Click to read more
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Kits