Pedals & Kits

Are you a DIY'er and enjoy building your own gear? Our kits range from beginner to advanced skills, so there is something for everyone!
Parts Kit - Iss 2 Fuzz Pedal, BC183KA style, Premium Build
PCB and parts kit for the Iss 2 fuzz built in the style of a BC183KA Fuzz Face. This kit includes all of the resistors, capacitors, and transistors used on the included circuit board. For the BC183KA style parts kit, a pair of BC183A transistors are included.
$51.48
Parts Kit - Iss 2 Fuzz Pedal, BC108 style, Premium Build
PCB and parts kit for the Iss 2 fuzz built in the style of a BC108 Fuzz Face. This kit includes all of the resistors, capacitors, and transistors used on the included circuit board. For the BC108 style parts kit, a pair of BC108C transistors are included.
$51.52
Pedal Kit - Mod® Electronics, The Rock Bottom, Bass Fuzz
The Mod® Electronics Rock Bottom is a bass fuzz kit that gives you all of the sizzle you'd expect from a vintage fuzz without sacrificing those low frequencies. Use the blend pot to set your fuzz levels and dial in the volume to get that sound you need. This versatile pedal can be used for the sludgiest bass tones to the cleanest boost and everything in-between.
$52.50
Pedal Kit - Mod® Electronics, The Contortionist II, Fuzz
The Mod® Electronics Contortionist II kit is an all analog, high octane fuzz box. It produces fuzz with layered octave overtones similar to those produced by an electronic-bow. The frequency multiplier circuitry creates harmonics that swell and recede depending on gain setting, pick attack, neck position and pickup. This is a high gain circuit that can put out up to 2 volts and will provide ample amounts of sustain. The Contortionist II has all the features of the original Contortionist with an added tone control for a wider range of sounds, and an LED that lights up when the unit is activated.
$53.75
Radio Kit - 2 Tube Regenerative Radio
This radio kit will cover the AM radio band along with the SW radio band. Power for this receiver is 1.5 V DC for the filaments and 45V DC for the plate current. A D cell and five 9V transistor batteries wired in series will work to power this radio. A 2000 ohm headset or an audio amplifier is required. Requires two T-1T4_DF91 tubes (not included).
$54.95
Parts Kit - V828 Italian Fuzz Pedal, PCB Version, Premium Build
PCB and parts kit for the V828 fuzz pedal. This is based on the classic Italian-made V828 Tone Bender. These were also sold under the Jen brand. This kit includes all of the resistors, capacitors, and solder tags used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own.
$55.02
Parts Kit - MKII Fuzz Pedal, Stripboard Professional Version, Premium Build
PCB and parts kit for the MKII fuzz pedal. This is based on the classic stripboard Tone Bender Professional. This stipboard fuzz circuit was also used in some versions of the Supa Fuzz as well as some other fuzz pedals. This kit includes all of the resistors, capacitors used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own.
Starting at $58.23
Kit - Fender® Stratocaster® Mid Boost Kit
Genuine Fender® Mid Boost upgrade kit for Strats with active electronics. This circuit is used in the signature Eric Clapton and Buddy Guy strats and is commonly referred to as the Clapton Boost. The Mid Boost knob adjusts gain from 0 dB (no boost) to 25 dB (maximum boosted mids). This boost sounds great clean and adds powerful control to distortion.
$59.95
Parts Kit - Eyelet-Rite Fuzz Pedal, Germanium Version, Premium Build
Parts Kit - Eyelet-Rite Fuzz Pedal, Germanium Version, Premium Build PCB and parts kit for the Eyelet-Rite fuzz pedal. This is based on the point to point version of the germanium Mosrite Fuzzrite pedal. This kit includes all of the resistors, capacitors, eyelets, and the footswitch used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own.
$61.47
Pine Board AM Transmitter components - Ham Nation, Bob Heil
Kit components for the Ham Nation AM Transmitter project.
$62.45
Parts Kit - Zonk Machine, PCB Version, Premium Build
PCB and parts kit for the Zonk Machine. This is based on the original PCB version. This kit includes all of the resistors and capacitors used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own.
$62.69
On Backorder
Guitar Wiring Upgrade Kit - Mod® Electronics, SG Standard
The K-GMOD-7 is a vintage style wiring kit for SG guitars. Use this kit to upgrade your current SG electronics to high quality parts. This kit also includes a treble bleed mod for the volume pots to enhance clarity with lower settings and comes with detailed instructions and all the parts you need to make your modification.
$63.58
Parts Kit - MKIII / MKIV Fuzz Pedal, Premium Build
PCB and parts kit for the MKIII / MKIV fuzz. This kit includes all of the resistors, capacitors, diodes, potentiometers, and terminal pins used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own.
Starting at $63.61
Guitar Wiring Upgrade Kit - Mod® Electronics, ES-335 Standard
The K-GMOD-6 is a vintage style wiring kit for ES-335 guitars. Use this kit to upgrade your current ES-335 electronics to high quality parts. This kit also includes a treble bleed mod for the volume pots to enhance clarity with lower settings and comes with detailed instructions and all the parts you need to make your modification.
$64.70
Pedal Kit - Mod® Electronics, The Ring In Return, Octave-Up Fuzz
The Ring In Return is an octave-up fuzz effect that is an all-analog design that captures those late 60s octave-up fuzz tones. Transformer-coupled germanium diodes produce sounds that range from a subtle octave-up to thick, harmonically-rich sonic textures and synth-like tones. Experimenting with different pickups and tone-control settings on your guitar with The Ring In Return can also produce sitar-like sounds. Warning: This circuit was designed for use with a 9 VDC power supply only.
$69.95
Pedal Kit - Mod® Electronics, Erratic Clutch Deluxe
The Mod® Electronics Erratic Clutch Deluxe is a unique effect pedal kit that gives you fuzzy square wave distortion as well as a monophonic sub-octave square wave using a total of only four transistors. The two signals can be used individually or mixed together for a raw and sonically rich synthy output. Full of character and quirk, this pedal will give you a truly original sound. The middle knob is the bias control. This adjusts the pulse width in the initial fuzz stage of the pedal. Set this knob to fit your pickups and playing style. The closer to the center the longer the note will sustain but with that comes more chaotic tracking for the divider. Moving it more clockwise or counterclockwise will give you more predictable note tracking on the divider with less sustain.
$72.95
Pedal Kit - Mod® Electronics, The Verb Deluxe, Digital Reverb
The Mod® Electronics Verb Deluxe kit is built around the Belton Digi-Log Mini Module (P-RBTDR-2H-X) for a great digital reverb sound. The Belton Digi-Log module was built as a replacement for traditional spring reverberation units. Features include both Dwell and Mix controls, allowing the dry signal to be blended with the processed signal from a just hint of reverb to deep, cavernous echoes. The dwell control adds an extra flexibility, providing a full palette of sweet reverb sound. The effect pedal operates on a 9V battery. For a longer lasting option, a 9-volt adapter can be purchased separately. The Godlyke 9-volt adapter (M-PAS-S) may be purchased separately to power your new pedal.
$79.95
Pedal Kit - Mod® Electronics, Phase / Off, Modulation - Phaser
The Phase / Off is a four-stage phaser based around the Sound Semiconductor SSI2140 voltage-controlled multi-mode filter. This pedal offers classic phasing effects along with plenty of control to dial in the perfect amount of modulation using the Depth, Rate, and Regen knobs. The Stages switch can change the Phase / Off from four-stage phaser to a two-stage phaser providing a wide variety of different phasing sounds. Change the Mode switch from LFO to Manual to use the Phase / Off in fixed phase mode controlled by the Depth knob for unique filtering effects. The Phase / Off pedal kit is the second entry in the Nexus Series from Mod® Electronics. This series features a PCB base rather than the Mod® Electronics’ traditional point-to-point wiring kits to offer builders an even wider variety of effects to build. The Phase / Off is a great pedal for intermediate skill sets. It features an all through-hole build with pre-soldered SMT SSI2140. The pedal operates on 9VDC.
$79.95
Pedal Kit - Mod® Electronics, The Persuader Deluxe, Overdrive
The Mod® Electronics Persuader Deluxe utilizes a Darlington preamp to push cascaded triode vacuum tubes into distortion. A boost switch provides an additional layer of flexibility with added gain and a little extra bottom end. An LED indicator lights up when the Persuader Deluxe is engaged and not in true bypass mode. Operates on a 9V battery or AC adapter, which is not included. When completed, this pedal draws considerable current and battery life will be short. The Godlyke 9-volt adapter (M-PAS-S) may be purchased separately to power your new pedal.
$81.45
Effects Pedal - ProCo, Rat-2, Distortion
The RAT2 is the classic distortion pedal in the Pro Co RAT family. It has a unique tone structure that other effect devices are measured against. The beauty of the RAT 2 lies in its versatility. Used as a primary distortion, it excels at arena rock rhythm tones and soaring leads.
$82.45
Power Supply components - Ham Nation, Bob Heil
Kit components for the Ham Nation Power Supply project. From HAMNation episodes 290, 291, 292, 293, 294, and 295
$95.95
Effects Pedal - Maxon, OD808, Overdrive
The Maxon OD808 is an identical circuit to the original TS808 Tubescreamer Maxon designed and built in the late 1970s. Featuring a JRC4558, the OD808 offers the same natural overdriven tones as the original pedals used widely across all genres of music. The OD808 has a warmer and smoother tone than the OD-9 that pairs nicely with clean amps in addition to sounding great in just about any rig.
Features
  • Natural and smooth overdrive effects with tube-like saturation
  • Preserves the original tone of the instrument
  • Produces a variety of sound ranging from a clean boost to fully saturated overdrive
  • LED indicator for effect on/off
  • DC power or 9V battery
  • Made in Japan
$99.95
Pedal Kit - Mod® Electronics, Suspended Chime, Chorus, Delay
The Mod® Electronics Suspended Chime has two powerful effects in one pedal - chorus and chorus/delay. The Suspended Chime features a blend knob which allows you to go from subtle to lush chorus effect in either set up. Using the toggle switch, you can add a 190 millisecond delay to the chorus introducing special depth to your tone. Varying the dry/wet mix can fatten your rhythms or produce a shimmering 12-string sound. The Suspended Chime kit comes equipped with an LED indicator and industry standard 9 volt center negative power jack. MOD® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. All effects pedals operate on a 9V battery.
$99.95
Effects Pedal - Maxon, OD808X, Overdrive Extreme
The OD808X is the perfect pedal for those wishing their OD808 went to 11. The OD808X offers more of everything with its extended drive, frequency response, and overall levels providing an articulate overdrive that can cut through any mix. Features
  • Based on the classic natural drive sound of Maxon’s OD808 circuit.
  • Offers an extended frequency range and response compared to the OD808. The additional range has been carefully tuned to provide clarity and accentuate the high-gain settings.
  • OD808X offers more gain and harder clipping than the standard OD808, creating tube-like distortion with excellent note definition and clarity.
  • OD808X features a buffered JFET bypass switching with a low impedance output, allowing it to drive long cables or other effect units without loss of signal.
  • LED indicator for effect on/off
  • DC power or 9V battery
  • Made in Japan
$99.95