You are here

Kits

Are you a DIY'er and enjoy building your own gear? Our kits range from beginner to advanced skills, so there is something for everyone!

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(4 pages)
P-BHFSMField Strength Meter Kit - Ham Nation, Bob Heil

Kit components for the Ham Nation Field Strength Meter project. From HAMNation episode 289.


$7.10
$6.39
You save: 10%
Click to read more
K-SNUB1Snubber Kit - For Use With Two EL84 Tubes
Snubber parts kit for circuits with (2) EL84 tubes
x2 RQ3K - 3K Ohms 5 Watt power resistor
x2 R-B8D2M - 8.2Meg Ohms 1 Watt resistor
x2 RD0047-600 - 0.0047uF 600 Volt Orange Drop Capacitor
Summary Written by Dave Zimmerman - Maven Peal Amplifiers
The "Snubber" circuit was published in the "Radiotron Designers Handbook" in the 1930s and is supposed to serve as a "[sonically transparent] shock absorber" to remove unwanted high frequencies and dangerously high voltages resulting from output transformer ringing, without the "brick wall" effect of using diodes.  "Output transformer ringing often so
$8.25
$7.43
You save: 10%
Click to read more
K-SNUB2Snubber Kit - for 4 EL84 Or 2 Octal Tubes
Snubber parts kit for circuits with (4) EL84 tubes or (2) Octal tubes
x2 R-Q1D5K - 1.5K Ohms 5 Watt power resistor
x2 R-B8D2M - 8.2Meg Ohms 1 Watt resistor
x2 C-RD01-600 - 0.01uF 600 Volt Orange Drop Capacitor
Summary Written by Dave Zimmerman - Maven Peal Amplifiers
The "Snubber" circuit was published in the "Radiotron Designers Handbook" in the 1930s and is supposed to serve as a "[sonically transparent] shock absorber" to remove unwanted high frequencies and dangerously high voltages resulting from output transformer ringing, without the "brick wall" effect of using diodes.  "Output transfo
$8.50
$7.65
You save: 10%
Click to read more
K-SNUB3Snubber Kit - For Use With Four Octal Tubes
Snubber parts kit for circuits with (4) Octal tubes
x2 R-R820 - 820 Ohms 10 Watt power resistor
x2 R-B8D2M - 8.2 Meg Ohms 1 Watt resistor
x2 C-RD022-600 - 0.022uF 600 Volt Orange Drop Capacitor
Summary Written by Dave Zimmerman - Maven Peal Amplifiers
The "Snubber" circuit was published in the "Radiotron Designers Handbook" in the 1930s and is supposed to serve as a "[sonically transparent] shock absorber" to remove unwanted high frequencies and dangerously high voltages resulting from output transformer ringing, without the "brick wall" effect of using diodes.  "Output transformer ringing oft
$9.50
$8.55
You save: 10%
Click to read more
K-702Amp Mod Kit - MOD® Kits, Tone Stack Mod

This kit is for those guitarists who want to experiment with spicing up the tone of their vintage silver-face or black-face Fender amp by modifying the tone stack components. The kits comes with parts and easy to follow instructions. You will need your own tools and solder.


$16.95
$15.26
You save: 10%
Click to read more
K-703Amp Mod Kit - MOD® Kits, Normal to Bass Conversion

This kit was designed for those who play both guitar and bass. Turn the Normal Channel in your silver-face or black-face Fender amp into the Bass Instrument channel. The kit comes with parts and easy to follow instructions. You will need your own tools and solder.


$16.95
$15.26
You save: 10%
Click to read more
K-JRG01-KITKit - BusBoard, Junior Genius Blinky Lights Kit

Junior Genius Kits are built for experimentation, learning and fun! Experience the joy of seeing your first LED light up. The Blinky Lights Kit leads you through 10 core activities, from a simple LED circuit up to more advanced transistor LED blinky light circuits, using standard parts on a real-world breadboard. Learn about voltage and current by using LEDs, resistors, capacitors and transistors. You'll be able to build circuits using a schematic diagram, and there's plenty of help to get you there. Simple examples make it easy to grasp the basics and 'What's Happening' and 'Things To Try' sections encourage you to dig deeper. You will get valuable assembly and troubleshooting experience as you learn to use a great experimentation tool, the solderless breadboard. Real hands-on experience means greater educational value. This next-generation science kit doesn’t seal the parts into simplified plastic blocks.


$23.95
$21.56
You save: 10%
Click to read more
K-920Effects Pedal Kit - MOD® Kits, The Piledriver, Power Boost

"The PileDriver" is a clean boost kit that will provide up to 38dB of gain to your guitar signal. Use it to push your preamp into overdrive or as a line driver if you are experiencing signal degradation from your effects chain. This is a simple kit and great for beginners!


$24.95
$22.46
You save: 10%
Click to read more
K-700Amp Mod Kit - MOD® Kits, Bass to Tremolo Conversion Kit

This kit was designed for the guitarist who owns a silver-face Bassman and rarely uses the bass instrument channel. Turn the bass instrument channel into a foot-switchable vintage tremolo effect for the normal channel. The kit comes with parts and easy to follow instructions. You will need your own tools and solder


$25.95
$23.36
You save: 10%
Click to read more
P-EVJLiteIIB 18W Kit - Valve Junior Conversion Parts

Convert your Epiphone Valve Jr. into a Lite IIb 18 Watt amp using the "Baby Will" kit. The Baby Will is a PCB simplified version of the legendary Marshall 18 Watt 1974x circuit. The circuit laid out on a circuit board is known as the LiteIIb. It's capable of tone from clean jazz, crunchy blues, to raunchy classic rock. Crank up the volume and you'll be in AC/DC Back In Black heaven


$29.22
$26.30
You save: 10%
Click to read more

Pages

(4 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Kits