You are here

Kits

Filter these results
Sort By:
products per page
View Mode: List View · Grid View
K-950Effects Pedal Kit - MOD® Kits, The Thunderdrive, Overdrive
The Thunderdrive is an overdrive pedal kit that will provide a signal boost at low gain settings and its own distortion at maximum gain settings. You can use it to push your preamp into overdrive or as a source of smooth distortion. Adjusting volume control and gain control results in a wide variety of tones in spite of its simple construction.
This pedal is capable of overdriving the preamp section of your guitar amp or adding its own layer of distortion at lower volume. Using point to point wiring and easy to follow instructions you can have a working overdrive pedal in a matter of hours.
All you need to provide is solder and a soldering iron. Uses 9 volt battery which is not included.
$29.95
$26.96
You save: 10%
Click to read more about this product.
K-955Effects Pedal Kit - MOD® Kits, Thunderdrive Deluxe, Overdrive
The Thunderdrive Deluxe is an overdrive pedal kit that will provide a strong clean signal boost in the early gain settings and smooth distortion at maximum gain settings. Adjusting volume control and gain controls provides a wide variety of tones in spite of it's simple contruction.
The Turbo switch provides an additional boost in volume and less internally generated distortion. The pre-painted black enclosure, red control knobs and red LED indicator give the Thunderdrive Deluxe an understated attractive finish. It is capable of overdriving the preamp section of your guitar amp or adding it's own layer of distortion at lower volume.
This is an easy build kit with point to point wiring and clear, easy to follow instructions. The current draw of this pedal is very low at 1.3 milliamps, allowing for long battery life. All you need to provide is solder, soldering iron and a few simple tools.
$39.95
$35.96
You save: 10%
Click to read more about this product.
K-960Effects Pedal Kit - MOD® Kits, The Trill, Tremolo
The Trill tremolo pedal offers classic tremolo tones in an easy to build kit. The Trill's speed knob provides a wide range from a very slow to rapid fire effect. The depth knob varies the ratio between effected and dry signal.
Using modern, low noise transistors makes operation of The Trill quiet with no signal drop when engaged. The Trill uses true bypass foot switching so it is out of the signal path when not engaged.
All you need to provide is solder and tools! Uses 9 volt battery which is not included.
$43.95
$39.56
You save: 10%
Click to read more about this product.
K-975Effects Pedal Kit - MOD® Kits, Ring Resonator, Octave-Up Fuzz
The Ring Resonator is the newest member of the MOD® Kits DIY family. Order now to be one of the first people to get this new octave up fuzz pedal!
The Ring Resonator kit is an octave up fuzz effect; an all analog design that captures those late '60s octave-up fuzz tones. Transformer coupled germanium diodes produce sounds that range from a subtle octave up to thick, harmonically rich sonic textures and synth-like tones. Experimenting with different pickups and tone control settings on your guitar with the Ring Resonator can also produce sitar-like sounds.
MOD® Kits are designed to give novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy-to-follow instructions and use point-to-point wiring. A pre-drilled enclosure and all necessary parts are included. All you need to provide are hand tools, a soldering iron and solder.
The effect pedal operates on a 9V battery.
$64.95
$58.46
You save: 10%
Click to read more about this product.
K-980Effects Pedal Kit - MOD® Kits, The Persuader Deluxe, Overdrive
The Persuader Deluxe utilizes a Darlington preamp to push cascaded triode vacuum tubes into distortion.
Four dual triode vacuum tubes are included with each kit (JJ 5751, 12AX7B China, JJ 12AU7 and a NOS USA-made 12AT7). Swap to create a wide range of tones from just a hint of break up from the JJ 5751 to over the top crunchy distortion using the NOS US made 12AT7.
A boost switch provides an additional layer of flexibility with added gain and a little extra bottom end. An LED indicator lights up when the Persuader Deluxe is engaged and not in true bypass mode.
Operates on a 9V battery or AC adapter, which is not included. When completed, this pedal draws considerable current and battery life will be short. The Godlyke 9-volt adapter (M-PAS-S) may be purchased separately to power your new pedal.
$99.95
$89.96
You save: 10%
Click to read more about this product.
K-MOD102-FAmp Kit - MOD® Kits, MOD102 guitar amp (Non-US Version)

The MOD102-F is the foreign (non-USA) version of the MOD 102 including a Hammond 369EX world power transformer instead of the 269EX. Please note: there is no power cord included with this kit (due to variations in electrical outlets around the world). You will need to find a power cord that can fit through the 1/4" diameter (6.35 mm) rubber grommet hole on the rear panel.


$250.00
$225.00
You save: 10%
Click to read more about this product.
K-501Amp Kit - Monoblock Tube Amplifier
Tube designs rival the sound of high end audio amplifiers that cost 10 times as much! This kit was designed by George Fathauer. Enjoy the thrill of high end audio without going broke and enjoy the satisfaction in building it yourself. Kit come complete will all parts and easy to follow instructions.
Uses 11MS8 Power tubes included with the kit. Also includes board for mounting PC board and transformers.
Input Impedance: 100K ohms
Output Impedance: 8 ohms
Power Output: 8 watts per channel
Frequency Response: 20 to 20,000 Hz
Minimum Input for Full Output: 0.3 V
Total Harmonic Distortion @ 1 W:
$124.95
$112.46
You save: 10%
Click to read more about this product.
K-502Amp Kit - Stereo Integrated Tube Amplifier
Tube designs rival the sound of high end audio amplifiers that cost 10 times as much! This kit was designed by George Fathauer. Enjoy the thrill of high end audio without going broke and enjoy the satisfaction in building it yourself. Kit comes complete will all parts and easy to follow instructions. Easily built in one evening. Uses 11BM8 tubes included in the kit. Also included pine board for mounting PC board and transformers.
$204.95
$184.46
You save: 10%
Click to read more about this product.
P-18WLiteIIB 18W Kit - Scratch Build Parts
GuitarAmplifierPCBs.com
18 Watt LiteIIb "Baby Will"
Parts List for Scratch Build - Contains the following items:
Two C-ET47-50: Electrolytic Capacitor - 47uF 50V
One C-MD1-630: Mallory 150 Capacitor - 0.1uF 630V
One C-MD0047-630: Mallory 150 Capacitor - 0.0047uF 630V
Four C-MD01-630: Mallory 150 Capacitor - 0.01uF 630V
One C-SM500: Silver Mica Capacitor - 500pF 500V
One R-R150: Wire Wound Resistor - 150 ohm 10 watt
Two R-VA500KA: Potentiometer - 500K audio 24 mm
Two S-H901: Jack - ¼" Panel Mount
Eight P-K339: Knobs - Marshall Style
Four P-ST9-620: Tube Socket - 9 pin PC Mount
Two S-H144: Tube
$49.35
$44.42
You save: 10%
Click to read more about this product.
K-995Effects Pedal Kit - MOD® Kits, The Aggressor, Distortion
The Aggressor is a high gain distortion pedal kit that delivers contemporary distortion with plenty of chunk and ear-splitting pitch harmonics. The distortion effect goes from subtle break-up to over-the-top molten distortion at maximum gain.
The Aggressor features true bypass, LED indicator, and a versatile tone control with a scoop/bump switch that shifts the mid-frequency response allowing you to craft a tone that fits your style of playing. It works well with humbuckers and single coil pickups, so you can turn any guitar into a lethal weapon capable of inflicting serious brain damage and spontaneous combustion!
MOD® Kits are designed to give novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy-to-follow instructions and use point-to-point wiring. A pre-drilled enclosure and all necessary parts are included.
$74.95
$67.46
You save: 10%
Click to read more about this product.
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Kits