Products
No product page found for product knobs.
Showing search results for knobs
Showing results for knob. Search instead for knobs
Accessory Kit - Fender®, for Stratocaster
Fender Stratocaster accessory kit. Includes Volume & Tone knobs, tremolo arm tip, switch tip, tremolo back plate, and pickup covers
Colors Available:
$15.95
Amp Kit - Mod® Electronics, MOD102+ guitar amp
The Mod® Electronics MOD102+ expands on the same all analog vacuum tube classic American circuit design combined with a British style Class A output section as the Original MOD102 with added additional “+” features. These special features include a three position progressive toggle switch for off-standby-power and additional push-pull functionality for each control - pull out the bass control knob for “mid boost”, pull out the treble control knob for “bright”, pull out the volume control knob for “turbo”.
$315.00
Bridge - Gotoh, BS-TC1 Relic, Brass In-Tune, Aged Chrome
Gotoh's unique grooving on the “In-Tune” saddles results in more exact intonation compared to traditional vintage-style saddles. Each saddle is reversible and can be used in any position. Titanium construction is used for rich harmonic overtones and long sustain. The brass saddles create a bright sound. 10.8mm string spacing
$52.20
Capacitor - 100pF, Variable, Single Section
This capacitor is used as a tuning capacitor in a variety of RF test equipment and ham radio gear. It's combination of low price, high maximum voltages, fairly large capacitances, and low-leakage L-4 grade ceramic have made it a popular configuration. Single section 100pf, screwdriver or knob adjustable, full rotation.
$32.20
Chassis - Mod®, Buzzaround, Pre-drilled, Hammered Dark Gray
Pre-drilled vintage style pedal enclosure by Mod® Electronics. The shape of this folded steel enclosure is inspired by the original Burns Buzzaround enclosures and is pre-drilled to match the original layout of the Buzzaround pedal. The hammered dark gray powder coat provides a close match for the original appearance but will hold up much better than the paint found on the vintage pedals.
$74.95
Chassis - Three Knob Fuzz, Pressed Steel
Pre-drilled three knob pedal enclosure made of pressed steel. This large enclosure is a close match to the original enclosures found on various vintage fuzz effects such as the Vox Tone Bender MKIII, Rotosound Fuzz, and Park Fuzz Sound. It features three holes for potentiometers, two top mounted holes for ⅜” jacks, and a footswitch hole. Comes with 4 rubber feet and a pack of mounting screws(packaged separately) for attaching the bottom plate.
- Footswitch Hole Diameter: 0.492 in. (12.5mm)
- Potentiometer Hole Diameter: 0.294 in. (7.47mm)
- Jack Hole Diameter: 0.447 in. (11.35mm)
$19.95
Control Plate - Gotoh, CP-10 Relic, Aged Chrome
The Gotoh Relic tele control plate is a convincingly aged part that is perfect for a vintage guitar or a relic'd guitar. Parts from the Gotoh Relic series are uniquely worn for an aged look that offers the functionality of a new part. The various techniques used on these parts provide a relic'd look that appears genuine and not overdone. This plate fits 3/8" bushing pots such as the CTS R-VC-MA or Alpha R-V38-XA and is compatible with standard selector switches. Relic'd mounting screws are included. For matching aged hardware, please check out the rest of the Gotoh Relic series:
- Dome Knobs - P-GGT-90
- Tele Bridge - P-GGT-85
- String Ferrules - P-GGT-87
- 6-in-a-line Tuners - P-GGT-81
- Strap Buttons - P-GGT-86-AC
- Neck Plate - P-GGT-89
- String Trees - P-GGT-92
$16.45
Dial Plate - 0 to 100, Black on Brushed Metal
Dial plates with 0-100 indicator marks. These plates are a simple way to add panel graphics to controls. They are easy to install beneath the nut of a potentiometer like a washer. The silk screened graphics on the brushed metal plate gives projects a clean and professional appearance. 40mm Dial Plate
60mm Dial Plate
- 40 mm (1.575”) outer diameter
- 9.95 mm (0.392”) inner diameter
- Best for 25.4mm (1”) or smaller knobs
60mm Dial Plate
- 60mm (2.362”) outer diameter
- 9.95mm (0.392”) inner diameter
- Best for 40.6 mm (1.59”) or smaller knobs
$1.70
Dress Nut - Befaco, Bananuts, for M7 Pots
Larger threaded black Bananuts for mounting potentiometers or other hardware with M7 bushings. These nuts look great beneath smaller sized knobs.
DSP Module - ABE, Accu-Bell Effector, 3 Adjustable Effects
The Accu-Bell Effector offers reverb, chorus, and delay with adjustable setting and tap tempo. This module runs on 5.5V to 9.5V DC so it is easy to incorporate into effect pedal builds. Please see the attached datasheet for an example schematic.
$21.95
Effects Pedal - ProCo, Rat-2, Distortion
The RAT2 is the classic distortion pedal in the Pro Co RAT family. It has a unique tone structure that other effect devices are measured against. The beauty of the RAT 2 lies in its versatility. Used as a primary distortion, it excels at arena rock rhythm tones and soaring leads.
$82.45
Fuse Holder - 3AG-Type, Low Profile, Knob, Right Angle Spade Lug
Panel mount 3AG fuse holder with spade lug connectors. This fuse holder features a low profile bayonet style knob and reduced overall height. The connector at the end of the holder is right angled which reduces the internal depth as well. It is a similar style to fuse holders used on many Fender® amps. Mounting nut and rubber washer included.
$5.95
Kit - Fender® Stratocaster® Mid Boost Kit
Genuine Fender® Mid Boost upgrade kit for Strats with active electronics. This circuit is used in the signature Eric Clapton and Buddy Guy strats and is commonly referred to as the Clapton Boost. The Mid Boost knob adjusts gain from 0 dB (no boost) to 25 dB (maximum boosted mids). This boost sounds great clean and adds powerful control to distortion.
$59.95
Knob & Bushing Puller - for Easy Removal From Guitar
The Knob and Bushing Puller's clear acrylic housing has a rubberized base to help protect the guitar's finish. The square unit has 2 ends- one end for pulling knobs, the other end can work with the attached hardware to easily extract Gibson, Schaller or Gotoh bridge and tailpiece stud bushings, without damaging the guitar Includes 6 bolts and 2 flat washers for pulling various bushing threads:
Roughly 0.065" clearance between the bottom of the knob and the top of the guitar required for knob puller attachment.
- 5/16-20
- 5/16-24
- 5/16-18
- 10-32
- M5
- M6
- M8
Roughly 0.065" clearance between the bottom of the knob and the top of the guitar required for knob puller attachment.
$37.00
Knob - Aluminum, Baldwin-Burns Style, Set Screw
Solid aluminum knobs with set screws. These circular knobs are a close match for the classic knobs used on Baldwin-Burns guitars and effects such as the Buzzaround. They feature a solid aluminum construction with a concave top and a vertical knurl for grip. Fits ¼” (6.35mm) pot shafts.
Colors Available:
- Height: 0.442 in.
- Diameter: 0.722 in.
- Fits ¼" shaft with set screw
Starting at $4.95
Knob - Aluminum, Matte Finish, Set Screw, Short Line, 0.5" Diameter
Anodized aluminum knob with short indicator line, set screw, and a matte metal finish. This solid aluminum knob has a straight knurled grip with a diameter of 0.5”. The knob also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts. For a larger version of this knob, see P-K611-X. For a brushed finish version of this knob, see P-K655X.
Colors Available:
$2.19
Knob - Aluminum, Matte Finish, Set Screw, Short Line, 0.75" Diameter
Anodized aluminum knob with short indicator line, set screw, and a matte metal finish. This solid aluminum knob has a straight knurled grip with a diameter of 0.75”. The knob also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts. For a smaller version of this knob, see P-K656-X. For a brushed finish version of this knob, see P-K310X.
Colors Available:
$2.25
Knob - Aluminum, Notched Tip Indicator, Set Screw, .75" Diameter
¾" dia. Knurled aluminum knob, 'positive grip', notched tip indicator, fits ¼" shaft. With set screw. Multiple color options available.
Colors Available:
$2.99
Knob - Aluminum, Set Screw, Chicken Head
Solid aluminum knob with a classic chicken head design. This knob has an infilled indicator line and counterbored base to hide potentiometer nuts. Fits 0.25” (6.35mm) shafts.
Colors Available:
New!:
- Height: 0.54 in. (13.72 mm)
- Length: 1.25 in. (31.75 mm)
- Fits ¼" shaft with set screw
$3.50
Knob - Aluminum, Set Screw, Diamond Knurl, 0.496” Diameter
Anodized aluminum knob with channeled indicator line and set screw. This slim, solid aluminum knob has a diamond knurled grip with a diameter of 0.495”. It also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts.
Colors Available:
- Height: 0.56 in.
- Diameter: 0.496 in.
- Fits ¼" shaft with set screw
$3.50
Knob - Aluminum, Set Screw, Notched Tip, 1.25" Diameter
1.25" diameter knurled aluminum knob, 'positive grip', notched tip indicator, fits ¼" shaft. With set screw. Multiple color options available.
Colors Available:
$3.99
Knob - Aluminum, Set Screw, Pinched with Line, 0.75" Diameter
Solid aluminum control knob with set screw. This knob has a pinched grip and is similar in size and appearance to the Davies 1510 but with sharper angles for a distinctive appearance. Fits ¼” (6.35mm) pot shafts.
Colors Available:
- Height: 0.575 in. (14.61 mm)
- Diameter: 0.75 in. (19.05 mm)
- Fits ¼" shaft with set screw
$1.89
Knob - Aluminum, Set Screw, Short Line, 0.495" Diameter
Anodized aluminum knob with short indicator line and set screw. This slim, solid aluminum knob has a straight knurled grip with a diameter of 0.495”. It also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts.
Colors Available:
$1.85