Knobs

Knob - Vintage "cupcake" style, set screw, brass insert
Colors Available:
Generic white or brown vintage, priced per single knob. Set Screw. Height: ½", Top Diameter: ¾", Base Diameter: 13/16" Replacement for Fender: 099-0933-000 Multiple color options available.
Starting at $1.99
Knob - Small, Indicator Line, set screw
Colors Available:
The P-K380 is a high quality Davies 1510 clone. This classic design can be found on countless pedals, synths, amps and other equipment. The set screw uses a metal insert for additional stability and durability. This knob has an infilled painted indicator and fits 1/4" (6.35mm) pot shafts. The P-K380 pairs nicely with the color matched P-K801-BRASS-X knobs.
Starting at $0.85
Knob - Witch Hat, Black 1-10, Skirted, Set Screw, Thick Numbers
Sold individually. Slightly thicker numbers than P-K314-1. Made in Taiwan.
$2.25
On Backorder
Knob - Witch Hat, Black 1-10, Skirted, Set Screw, Thin Numbers
Black knob with white lettering, skirted, for blackface/silverface amps, with set screw, sold individually. Replacement for Fender: 099-0930-000
$3.65
Knob - Scalloped Edge, Indicator Line, Set Screw, Brass Insert
Colors Available:
The P-K801-BRASS is a custom built Davies 1900H clone. This knob features a brass insert in addition to a thick plastic build resulting in the most solid version of this knob available. The thick plastic eliminates the unfortunate hairline fractures that can commonly be found near the set screw of other versions. The P-K801-BRASS has an infilled painted indicator and fits ¼” (6.35mm) pot shafts.
$0.95
Knob - Davies, 1910 and 1913, Daka-ware, Skirted
High-quality USA made knobs from Davies Molding. The skirted 1900 series knobs are made of solid phenolic and feature an indicator line on the skirt. These classic knobs have been used on a variety of equipment throughout the decades and are still popularly used on synthesizers today. The smaller 1910 knob was used on many early Serge paperface panels. Davies 1910 (Small)
  • Height: 0.50 in.
  • Diameter: 0.75 in.
  • Fits ¼" shaft with set screw

Davies 1913 (Large)
  • Height: 0.625 in.
  • Diameter: 1.13 in.
  • Fits ¼" shaft with set screw
$2.75
Knob - Black, Cap, Mini Marshall Style, Set Screw
Cap Colors Available:
Black with cap, shorter profile than P-K340. Measures 0.59" in height. Set screw.
$2.99
Knob - Plastic, Set Screw, Skirted w/ Dot, 1.01" Diameter
Large black plastic control knob with set screw and brass insert. This skirted knob features a radial-brushed metal cap. The grip has large fluting with a white dot indicator on both the top of the grip and on the skirt of the knob. The style is similar to the Cosmo knobs found on many Moog synthesizers. Fits ¼” (6.35mm) pot shafts.
Starting at $1.05
Knob - Phenolic, Set Screw, Orange Amp Style, Skirted
Phenolic skirted knobs with a set screw and brass insert. These fluted round knobs are close matches for the classic knobs used on Orange Amps. Each knob features a painted dot indicator on the skirt. Fits ¼” (6.35mm) pot shafts. 19mm Skirt:
  • Height: 0.61 in. (15.5 mm)
  • Diameter: 0.74 in. (19 mm)
  • Fits ¼" shaft with set screw

28mm Skirt:
  • Height: 0.61 in. (15.5 mm)
  • Diameter: 1.1 in. (28 mm)
  • Fits ¼" shaft with set screw

42mm Skirt:
  • Height: 0.79 in. (20 mm)
  • Diameter: 1.645 in. (42 mm)
  • Fits ¼" shaft with set screw
Starting at $2.99
Knob - Phenolic, Set Screw, Premium RCA Style, Skirted, Pointer
Phenolic skirted knobs with a set screw and brass insert. These unique knobs closely match the RCA style of knobs used on vintage test equipment, radios, studio consoles and other equipment. They are sometimes referred to as fester knobs. The RCA style knobs feature an inlay indicator line. Fits ¼” (6.35mm) pot shafts. 22mm Skirt:
  • Height: 0.495in. (12.6 mm)
  • Diameter: 0.875 in. (22 mm)
  • Fits ¼" shaft with set screw

26mm Skirt:
  • Height: 0.656 in. (16.7 mm)
  • Diameter: 1.02 in. (26 mm)
  • Fits ¼" shaft with set screw

33mm Skirt:
  • Height: 0.792 in. (20.1 mm)
  • Diameter: 1.293 in. (33 mm)
  • Fits ¼" shaft with set screw

40mm Skirt:
  • Height: 0.865 in. (22 mm)
  • Diameter: 1.568 in. (40 mm)
  • Fits ¼" shaft with set screw
Starting at $2.55
Knob - Pointer, Small, Knurled, 0.675” Diameter
Colors Available:
This vintage knob design has been used on numerous boutique pedals. These classy knurled pointer knobs feature a slotted set screw, and fit ¼" solid shaft potentiometers. These are a close match to the Davies 1400.
  • Height: 0.43 in.
  • Length: 0.825 in.
  • Fits ¼" shaft with set screw
$0.69
Knob - Davies, 1470, Daka-ware, Large, Pointer
Colors Available:
High-quality USA made knobs from Davies Molding. The large 1470 pointer knob is made of solid phenolic and features a fine ridged grip with a distinctive point. This classic knob has been used on a variety of guitar pedals such as the Klon and countless EHX effects.
  • Height: 0.50 in.
  • Length: 1.13 in.
  • Fits ¼" shaft with set screw
Starting at $2.55
Knob - Davies, 1400, Daka-ware, Small, Pointer
Colors Available:
High-quality USA made knobs from Davies Molding. The small 1400 pointer knob is made of solid phenolic and features a fine ridged grip with a distinctive point. This classic knob has been used on a variety of guitar pedals and audio equipment such as the Pultec EQP-1A.
  • Height: 0.38 in.
  • Length: 0.84 in.
  • Fits ¼" shaft with set screw
Starting at $1.99
Knob - Cliff K5, Black, Set Screw, for Marshall
Cap Colors Available:
Black K5 knob with gold or silver cap and long indicator line. ¼" shaft with set screw. Replacement for Marshall. Measures 0.75" in height. See P-K342-NOI for a version with no indicator line.
$3.45
Knob - Rogan, 155 Series, Witch Hat, 0-10
High-quality USA made knobs from Rogan Corp. These phenolic knobs feature a brushed aluminum inlay and a skirt numbered 0-10. This knob was used on many vintage Music Man amps and the 155 Series knobs can be found on classic gear from Sunn, Music Man, Gibson and others. Fits ¼" shaft potentiometers.
  • Height: 0.65 in.
  • Diameter: 1.13 in.
  • Fits ¼" shaft with set screw

A variety of different knobs are available from the 155 Series. See the links below for the full selection. P-K155-1 Small-Skirted Witch Hat P-K155-3 Large Witch Hat w/ Arrow
$3.15
Knob - Plastic, Set Screw, Skirted w/ Top Line, 0.87" Diameter
Black plastic control knob with set screw and brass insert. The grip has a thick vertical knurl with an indicator line on a raised top. This skirted knob is a close match to the knobs used on some late 1960s Fuzz Face® pedals as well as the Eric Johnson signature model. Fits ¼” (6.35mm) pot shafts.
  • Height: 0.77 in.
  • Diameter: 0.87 in.
  • Fits ¼" shaft with set screw
$0.99
Knob - Davies, 1500, Daka-ware, Large, Stove Style
High-quality USA made knobs from Davies Molding. The large 1500 stove-style knob is made of solid phenolic and features an indicator line. The knob has a diameter of 1.125” with a .425” wide grip that runs the length of the entire knob. This classic Davies knob has been used on countless vintage electronics spanning many decades of use.
  • Height: 0.56 in
  • Diameter: 1.125 in.
  • Fits ¼" shaft with set screw
$2.85
Knob - Cliff, K1C, Set Screw, 25.4 x 15.1mm
Cap Colors Available:
Skirted knob with dot indicator and a unique fluted grip. The Cliff K1C knob can be found on classic equipment such as the Zonk Machine fuzz pedal and most notably on the EMS Synthi synthesizers.
  • Height: 15.1mm
  • Diameter: 25.4mm
  • Fits ¼" shaft with set screw
Starting at $1.85
Knob - Metal, Set Screw, Chrome Plated, Vox Style
Chrome plated metal knobs similar to those found on 1960s Vox instruments and amplifiers. These solid metal knobs feature a diamond knurled grip on the wider top section and a skirt with an infilled red dot indicator. The three different options include a blank unlabelled knob, a “VOLUME” knob, and a “TONE” knob. All three versions share the same dimensions and fit 0.25” (6.35mm) shafts.
  • Height: 0.63 in.
  • Grip Diameter: 0.64 in.
  • Skirt Diameter: 0.8 in.
  • Fits ¼" shaft with set screw
Starting at $4.25
Knob - Davies, 1600 & 1610, Daka-ware, Skirted
High-quality USA made knobs from Davies Molding. The small skirted 1610 knob is made of solid phenolic and features an indicator line on the 0.91” diameter skirt. This classic knob has been used on a variety of equipment and most notably on the Buchla 100 Series as well as some 200 Series modules.
  • Height: 0.59 in.
  • Diameter: 0.91 in.
  • Fits ¼" shaft with set screw

The large skirted 1600 knob is made of phenolic and features an indicator line on the 1.5” diameter skirt. This classic knob has been used on a variety of equipment and most notably on the Buchla 100 Series as well as some 200 Series modules.
  • Height: 0.69 in.
  • Diameter: 1.5 in.
  • Fits ¼" shaft with set screw
$3.09
Knob - for Peavey, Black Pointer, White Line
Black pointer with white line. Fits a 3/16" knurled shafts. Push on Peavey part: 70902145
$3.20
Knob - Aluminum, Set Screw, Chicken Head
Colors Available:
New!:
Solid aluminum knob with a classic chicken head design. This knob has an infilled indicator line and counterbored base to hide potentiometer nuts. Fits 0.25” (6.35mm) shafts.
  • Height: 0.54 in. (13.72 mm)
  • Length: 1.25 in. (31.75 mm)
  • Fits ¼" shaft with set screw
$3.50
Knob - Small Chicken Head, Black, Set Screw
Small black plastic chicken head knob with an off-white indicator line for a vintage look. Fits 6.35mm (1/4") potentiometer shafts.
$0.95
Knob - Ampeg, Classic, D Shaft with indicator line
Ampeg classic knob. D shaft. Original Ampeg replacement part.
$3.95