Knobs

Genuine Fender® Pure Vintage Radio Amplifier Knobs. From tone and volume knobs to pickup covers, bridge covers and more, Pure Vintage knobs and covers let you cosmetically customize your instrument or amplifier like never before. These genuine replacement parts are created with period-correct personality in mind to the same specifications as early Fender parts, allowing players to give any Fender amp, guitar or bass a shot of vintage-accurate looks and tone.

• Set of six ribbed replacement amplifier control knobs with indicator lines
• Introduced on Blonde and Brown-era amplifiers
• Used on '63 Fender Tube Reverb, Vibroverb and Vibro-King® amplifiers
• Fits most 1/4" solid shaft potentiometers on vintage and modern amplifiers and guitars

Original Fender® Jazz Bass knob set, black, package of 3.

Plastic skirted knob with set screws and brass insert. This massive knob features a textured matte finish and closely matches the look of Raytheon knobs used on vintage test equipment, radios, and studio equipment. It features a painted inlay arrow indicator on the skirt. The large skirt has a diameter of 1.812 inches. Fits ¼” (6.35mm) pot shafts.

Large MXR knob with set screw for MXR pedals. Original Dunlop replacement part. Skirted knob with white line and dot indicator.

High-quality USA made knobs from Davies Molding. The 1914 knob is the larger version of the classic 1900H found on countless synthesizers and pedals. This knob is made of solid phenolic and features an indicator line on the top. The knob pairs perfectly with the smaller diameter 1900 knobs such as the P-K801-BRASS-X as well as the skirted P-K234X knobs.

• Height: 0.50 in.
• Diameter: 0.75 in.
• Fits ¼" shaft with set screw

Black with grey line, Set screw Peavey part: 70902033

Generic white or brown vintage, priced per single knob. Set Screw. Height: ½", Top Diameter: ¾", Base Diameter: 13/16" Replacement for Fender: 099-0933-000 Multiple color options available.

Skirted knob with dot indicator and a unique fluted grip. The Cliff K1C knob can be found on classic equipment such as the Zonk Machine fuzz pedal and most notably on the EMS Synthi synthesizers.

• Height: 15.1mm
• Diameter: 25.4mm
• Fits ¼" shaft with set screw

Plastic wing knobs with set screws and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line. The grip diameter is 0.693 inches with a 1 inch clear skirt. Fits ¼” (6.35mm) pot shafts.

Plastic knobs with set screws and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line and a clear plastic skirt. The skirt diameter is 1 inch. Fits ¼” (6.35mm) pot shafts. For a non-skirted version see P-K398-X.

Plastic knobs with set screws and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line. The diameter is 0.685 inches. Fits ¼” (6.35mm) pot shafts. Note: Pair with R-VADAPT-125 to fit 0.125” potentiometer shafts. For a skirted version see P-K397-X. See P-K696 for the dual concentric knob lower.

• Fits ¼" Solid Shafts (Set Screw)
• Chicken head knobs are used everywhere on countless amps, stomp-boxes, etc.
• Brass Set Screw and Insert
• High Quality Plastic

Mid-sized black plastic control knob with set screw and brass insert. This knob is similar in appearance to the classic MXR knobs but with a smaller diameter. It features a fluted grip with an indicator line along with a small skirt with a dot indicator. Fits ¼” (6.35mm) pot shafts.

Large plastic knobs with set screw and brass insert. Similar to the knobs used on many classic Dunlop / MXR pedals. These knobs have a fluted grip with an indicator line as well as a dot indicator on the skirt. Fits ¼” (6.35mm) pot shafts.

Large vintage style skirted pointer knob. This knob is styled after the RCA “fester” knobs found on countless vintage electronics. The knobs feature a hex set screw, and fit ¼" solid shaft potentiometers.

Large knob with line indicator and set screw similar in style to the Davies 1500 and 1510 knobs. Pairs well with P-K380X. Fits ¼” (6.35mm) pot shafts.

• Knob Height = 0.60"
• Pointer Diameter = 1.06"
• Fits 1/4" shaft with set screw
• Oversized Davies 1510 Clone

Raised plastic chickenhead knob with brass insert and set screw. 1.20" in length. Davies 2300 clone.

This vintage knob design has been used on numerous boutique pedals. These classy knurled pointer knobs are made from a solid mold, feature a slotted set screw, and fit ¼" solid shaft potentiometers. Davies 1470 clone.

Plastic knobs with a set screw and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line. The diameter is 0.495 inches. Fits ¼” (6.35mm) pot shafts.

High quality miniature chicken head knob with set screw for smaller applications. 0.90" long nose to tail. Mini Davies 2300 clone.

Black plastic control knob with set screw and brass insert. The grip has a thick vertical knurl with an indicator line on a raised top. This skirted knob is a close match to the knobs used on some late 1960s Fuzz Face® pedals as well as the Eric Johnson signature model. Fits ¼” (6.35mm) pot shafts.

• Height: 0.77 in.
• Diameter: 0.87 in.
• Fits ¼" shaft with set screw

High quality chicken head knobs that resemble the style of knob found on the Zonk Machine II and Shatterbox fuzz pedals. The Zonk chicken head knob has a contoured center band with a textured finish. The outer dome has a shiny finish offering a visual contrast. Fits 0.25” (6.35mm) shafts with set screw and brass insert.

• Height: 0.75 in.
• Length: 1.065 in.
• Fits ¼" shaft with set screw

Medium sized plastic control knobs with set screw and brass insert. These unique knobs have a subtle retro design that works well in many applications. They have a fine vertical knurl and a raised top with an infilled indicator line. This style of knob can be found on some versions of the ProCo Rat. Fits ¼” (6.35mm) pot shafts. For a smaller version of this knob, see P-K410-X.

Small black plastic chicken head knob with an off-white indicator line for a vintage look. Fits 6.35mm (1/4") potentiometer shafts.